X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fnl80211.h;h=9bad65400fba76cad80e742b3784adbd4ca50637;hb=8113587c2d14d3be2414190845b2e2617c0aa33b;hp=2be7c63bc0f2591386b24db123c1aa280b15e382;hpb=a14ad05f47b55ea84136eb4da43ea96fa469326a;p=linux-2.6-omap-h63xx.git diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2be7c63bc0f..9bad65400fb 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -89,6 +89,22 @@ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use @@ -127,13 +143,23 @@ enum nl80211_commands { NL80211_CMD_NEW_MPATH, NL80211_CMD_DEL_MPATH, - /* add commands here */ + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ __NL80211_CMD_AFTER_LAST, NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS /** * enum nl80211_attrs - nl80211 netlink attributes @@ -188,10 +214,34 @@ enum nl80211_commands { * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * - * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11d country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -235,16 +285,35 @@ enum nl80211_attrs { NL80211_ATTR_MPATH_NEXT_HOP, NL80211_ATTR_MPATH_INFO, + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY + #define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_REG_RULES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 /** * enum nl80211_iftype - (virtual) interface types @@ -435,6 +504,66 @@ enum nl80211_bitrate_attr { NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_PASSIVE_SCAN: passive scan is required + * @NL80211_RRF_NO_IBSS: no IBSS is allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_PASSIVE_SCAN = 1<<7, + NL80211_RRF_NO_IBSS = 1<<8, +}; + /** * enum nl80211_mntr_flags - monitor configuration flags *