X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fphy.h;h=7224c4099a2820cd8e03b5589fa20e1eeb83b0a6;hb=960366cf8dbb3359afaca30cf7fdbf69a6d6dda7;hp=5e43ae7514122af688dc4679c04dd927856cb58b;hpb=6e5565f949af1322f8f3d3f43d044645ae448499;p=linux-2.6-omap-h63xx.git diff --git a/include/linux/phy.h b/include/linux/phy.h index 5e43ae75141..7224c4099a2 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -39,7 +39,8 @@ SUPPORTED_1000baseT_Half | \ SUPPORTED_1000baseT_Full) -/* Set phydev->irq to PHY_POLL if interrupts are not supported, +/* + * Set phydev->irq to PHY_POLL if interrupts are not supported, * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if * the attached driver handles the interrupt */ @@ -63,8 +64,6 @@ typedef enum { PHY_INTERFACE_MODE_RTBI } phy_interface_t; -#define MII_BUS_MAX 4 - #define PHY_INIT_TIMEOUT 100000 #define PHY_STATE_TIME 1 @@ -74,20 +73,30 @@ typedef enum { #define PHY_MAX_ADDR 32 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ -#define PHY_ID_FMT "%x:%02x" +#define PHY_ID_FMT "%s:%02x" + +/* + * Need to be a little smaller than phydev->dev.bus_id to leave room + * for the ":%02x" + */ +#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3) -/* The Bus class for PHYs. Devices which provide access to - * PHYs should register using this structure */ +/* + * The Bus class for PHYs. Devices which provide access to + * PHYs should register using this structure + */ struct mii_bus { const char *name; - int id; + char id[MII_BUS_ID_SIZE]; void *priv; int (*read)(struct mii_bus *bus, int phy_id, int regnum); int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); int (*reset)(struct mii_bus *bus); - /* A lock to ensure that only one thing can read/write - * the MDIO bus at a time */ + /* + * A lock to ensure that only one thing can read/write + * the MDIO bus at a time + */ struct mutex mdio_lock; struct device *dev; @@ -98,8 +107,10 @@ struct mii_bus { /* Phy addresses to be ignored when probing */ u32 phy_mask; - /* Pointer to an array of interrupts, each PHY's - * interrupt at the index matching its address */ + /* + * Pointer to an array of interrupts, each PHY's + * interrupt at the index matching its address + */ int *irq; }; @@ -251,7 +262,8 @@ struct phy_device { /* Bus address of the PHY (0-32) */ int addr; - /* forced speed & duplex (no autoneg) + /* + * forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; @@ -274,8 +286,10 @@ struct phy_device { int link_timeout; - /* Interrupt number for this PHY - * -1 means no interrupt */ + /* + * Interrupt number for this PHY + * -1 means no interrupt + */ int irq; /* private data pointer */ @@ -325,22 +339,28 @@ struct phy_driver { u32 features; u32 flags; - /* Called to initialize the PHY, - * including after a reset */ + /* + * Called to initialize the PHY, + * including after a reset + */ int (*config_init)(struct phy_device *phydev); - /* Called during discovery. Used to set - * up device-specific structures, if any */ + /* + * Called during discovery. Used to set + * up device-specific structures, if any + */ int (*probe)(struct phy_device *phydev); /* PHY Power Management */ int (*suspend)(struct phy_device *phydev); int (*resume)(struct phy_device *phydev); - /* Configures the advertisement and resets + /* + * Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, * forces the speed to the current settings in phydev - * if phydev->autoneg is off */ + * if phydev->autoneg is off + */ int (*config_aneg)(struct phy_device *phydev); /* Determines the negotiated speed and duplex */ @@ -359,14 +379,27 @@ struct phy_driver { }; #define to_phy_driver(d) container_of(d, struct phy_driver, driver) +#define PHY_ANY_ID "MATCH ANY PHY" +#define PHY_ANY_UID 0xffffffff + +/* A Structure for boards to register fixups with the PHY Lib */ +struct phy_fixup { + struct list_head list; + char bus_id[BUS_ID_SIZE]; + u32 phy_uid; + u32 phy_uid_mask; + int (*run)(struct phy_device *phydev); +}; + int phy_read(struct phy_device *phydev, u16 regnum); int phy_write(struct phy_device *phydev, u16 regnum, u16 val); +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); struct phy_device * phy_attach(struct net_device *dev, - const char *phy_id, u32 flags, phy_interface_t interface); -struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, + const char *bus_id, u32 flags, phy_interface_t interface); +struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), u32 flags, phy_interface_t interface); void phy_disconnect(struct phy_device *phydev); @@ -379,6 +412,8 @@ int mdiobus_register(struct mii_bus *bus); void mdiobus_unregister(struct mii_bus *bus); void phy_sanitize_settings(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); +int phy_enable_interrupts(struct phy_device *phydev); +int phy_disable_interrupts(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { return phydev->drv->read_status(phydev); @@ -406,5 +441,16 @@ void phy_print_status(struct phy_device *phydev); struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); void phy_device_free(struct phy_device *phydev); +int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); +int phy_register_fixup_for_id(const char *bus_id, + int (*run)(struct phy_device *)); +int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)); +int phy_scan_fixups(struct phy_device *phydev); + +int __init mdio_bus_init(void); +void mdio_bus_exit(void); + extern struct bus_type mdio_bus_type; #endif /* __PHY_H */