X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Flinux%2Fusb_isp116x.h;h=436dd8a2b64ac67bea6d8d183be800a97c9ddc57;hb=4117b61f7200cc83d509ed226e4d8239e4d6044b;hp=0d21407ccfc2657bf59df44c9f4dd8f210cf4c71;hpb=d4d62861b5cdb0ecfcae448e4281623284de5d05;p=linux-2.6-omap-h63xx.git

diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h
index 0d21407ccfc..436dd8a2b64 100644
--- a/include/linux/usb_isp116x.h
+++ b/include/linux/usb_isp116x.h
@@ -7,7 +7,7 @@
 struct isp116x_platform_data {
 	/* Enable internal resistors on downstream ports */
 	unsigned sel15Kres:1;
-	/* On-chip overcurrent protection */
+	/* On-chip overcurrent detection */
 	unsigned oc_enable:1;
 	/* INT output polarity */
 	unsigned int_act_high:1;
@@ -19,20 +19,6 @@ struct isp116x_platform_data {
 	   prevents stopping internal clock, increasing
 	   thereby power consumption in suspended state. */
 	unsigned remote_wakeup_enable:1;
-	/* Switch or not to switch (keep always powered) */
-	unsigned no_power_switching:1;
-	/* Ganged port power switching (0) or individual port
-	   power switching (1) */
-	unsigned power_switching_mode:1;
-	/* Hardware reset set/clear. If implemented, this function must:
-	   if set == 0,   deassert chip's HW reset pin
-	   otherwise,     assert chip's HW reset pin       */
-	void (*reset) (struct device * dev, int set);
-	/* Hardware clock start/stop. If implemented, this function must:
-	   if start == 0,    stop the external clock
-	   otherwise,        start the external clock
-	 */
-	void (*clock) (struct device * dev, int start);
 	/* Inter-io delay (ns). The chip is picky about access timings; it
 	   expects at least:
 	   150ns delay between consecutive accesses to DATA_REG,