X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Fnet%2Fcfg80211.h;h=5389afdc129756abcef4c088b2c7adfd84165670;hb=276e79ee6b3ff670dc9c041178da4b61af456a27;hp=50f3fd9ff52430c7bc196bdddfc3dd17df3abb35;hpb=805de022b100bcf796860fe88d7db4164066d1c3;p=linux-2.6-omap-h63xx.git diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 50f3fd9ff52..5389afdc129 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -471,26 +471,6 @@ struct ieee80211_txq_params { u8 aifs; }; -/** - * struct mgmt_extra_ie_params - Extra management frame IE parameters - * - * Used to add extra IE(s) into management frames. If the driver cannot add the - * requested data into all management frames of the specified subtype that are - * generated in kernel or firmware/hardware, it must reject the configuration - * call. The IE data buffer is added to the end of the specified management - * frame body after all other IEs. This addition is not applied to frames that - * are injected through a monitor interface. - * - * @subtype: Management frame subtype - * @ies: IE data buffer or %NULL to remove previous data - * @ies_len: Length of @ies in octets - */ -struct mgmt_extra_ie_params { - u8 subtype; - u8 *ies; - int ies_len; -}; - /* from net/wireless.h */ struct wiphy; @@ -559,6 +539,7 @@ enum cfg80211_signal_type { * is no guarantee that these are well-formed!) * @len_information_elements: total length of the information elements * @signal: signal strength value (type depends on the wiphy's signal_type) + * @hold: BSS should not expire * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -578,6 +559,105 @@ struct cfg80211_bss { u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); }; +/** + * struct cfg80211_auth_request - Authentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * authentication. + * NOTE: This structure will likely change when more code from mac80211 is + * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. + * Before using this in a driver that does not use mac80211, it would be better + * to check the status of that work and better yet, volunteer to work on it. + * + * @chan: The channel to use or %NULL if not specified (auto-select based on + * scan results) + * @peer_addr: The address of the peer STA (AP BSSID in infrastructure case); + * this field is required to be present; if the driver wants to help with + * BSS selection, it should use (yet to be added) MLME event to allow user + * space SME to be notified of roaming candidate, so that the SME can then + * use the authentication request with the recommended BSSID and whatever + * other data may be needed for authentication/association + * @ssid: SSID or %NULL if not yet available + * @ssid_len: Length of ssid in octets + * @auth_type: Authentication type (algorithm) + * @ie: Extra IEs to add to Authentication frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_auth_request { + struct ieee80211_channel *chan; + u8 *peer_addr; + const u8 *ssid; + size_t ssid_len; + enum nl80211_auth_type auth_type; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_assoc_request - (Re)Association request data + * + * This structure provides information needed to complete IEEE 802.11 + * (re)association. + * NOTE: This structure will likely change when more code from mac80211 is + * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. + * Before using this in a driver that does not use mac80211, it would be better + * to check the status of that work and better yet, volunteer to work on it. + * + * @chan: The channel to use or %NULL if not specified (auto-select based on + * scan results) + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be in State 2 (authenticated) with the + * peer STA + * @ssid: SSID + * @ssid_len: Length of ssid in octets + * @ie: Extra IEs to add to (Re)Association Request frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_assoc_request { + struct ieee80211_channel *chan; + u8 *peer_addr; + const u8 *ssid; + size_t ssid_len; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_deauth_request - Deauthentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * deauthentication. + * + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be authenticated with the peer STA + * @ie: Extra IEs to add to Deauthentication frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_deauth_request { + u8 *peer_addr; + u16 reason_code; + const u8 *ie; + size_t ie_len; +}; + +/** + * struct cfg80211_disassoc_request - Disassociation request data + * + * This structure provides information needed to complete IEEE 802.11 + * disassocation. + * + * @peer_addr: The address of the peer STA (AP BSSID); this field is required + * to be present and the STA must be associated with the peer STA + * @ie: Extra IEs to add to Disassociation frame or %NULL + * @ie_len: Length of ie buffer in octets + */ +struct cfg80211_disassoc_request { + u8 *peer_addr; + u16 reason_code; + const u8 *ie; + size_t ie_len; +}; + /** * struct cfg80211_ops - backend description for wireless configuration * @@ -644,12 +724,15 @@ struct cfg80211_bss { * * @set_channel: Set channel * - * @set_mgmt_extra_ie: Set extra IE data for management frames - * * @scan: Request to do a scan. If returning zero, the scan request is given * the driver, and will be valid until passed to cfg80211_scan_done(). * For scan results, call cfg80211_inform_bss(); you can call this outside * the scan/scan_done bracket too. + * + * @auth: Request to authenticate with the specified peer + * @assoc: Request to (re)associate with the specified peer + * @deauth: Request to deauthenticate from the specified peer + * @disassoc: Request to disassociate from the specified peer */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -724,12 +807,17 @@ struct cfg80211_ops { struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); - int (*set_mgmt_extra_ie)(struct wiphy *wiphy, - struct net_device *dev, - struct mgmt_extra_ie_params *params); - int (*scan)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_scan_request *request); + + int (*auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_auth_request *req); + int (*assoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_assoc_request *req); + int (*deauth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_deauth_request *req); + int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_disassoc_request *req); }; /* temporary wext handlers */ @@ -807,4 +895,67 @@ void cfg80211_put_bss(struct cfg80211_bss *bss); */ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); +/** + * cfg80211_send_rx_auth - notification of processed authentication + * @dev: network device + * @buf: authentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever an authentication has been processed in + * station mode. + */ +void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_rx_assoc - notification of processed association + * @dev: network device + * @buf: (re)association response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a (re)association response has been + * processed in station mode. + */ +void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_rx_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever deauthentication has been processed in + * station mode. + */ +void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_send_rx_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever disassociation has been processed in + * station mode. + */ +void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_hold_bss - exclude bss from expiration + * @bss: bss which should not expire + * + * In a case when the BSS is not updated but it shouldn't expire this + * function can be used to mark the BSS to be excluded from expiration. + */ +void cfg80211_hold_bss(struct cfg80211_bss *bss); + +/** + * cfg80211_unhold_bss - remove expiration exception from the BSS + * @bss: bss which can expire again + * + * This function marks the BSS to be expirable again. + */ +void cfg80211_unhold_bss(struct cfg80211_bss *bss); + #endif /* __NET_CFG80211_H */