X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=include%2Fnet%2Fmac80211.h;h=9083bafb63ca07e311b56e60d3d28c8b24da07fc;hb=3d3f487c58ef1ece714af280b29411960908149c;hp=be2a383b4776b4cb89409a24ff4ffb762972003e;hpb=cdcb006fbe7a74b5f7827f5c5c27e11399a2fab7;p=linux-2.6-omap-h63xx.git diff --git a/include/net/mac80211.h b/include/net/mac80211.h index be2a383b477..9083bafb63c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -275,11 +275,49 @@ struct ieee80211_low_level_stats { unsigned int dot11RTSSuccessCount; }; +/** + * enum ieee80211_bss_change - BSS change notification flags + * + * These flags are used with the bss_info_changed() callback + * to indicate which BSS parameter changed. + * + * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated), + * also implies a change in the AID. + * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed + * @BSS_CHANGED_ERP_PREAMBLE: preamble changed + */ +enum ieee80211_bss_change { + BSS_CHANGED_ASSOC = 1<<0, + BSS_CHANGED_ERP_CTS_PROT = 1<<1, + BSS_CHANGED_ERP_PREAMBLE = 1<<2, +}; + +/** + * struct ieee80211_bss_conf - holds the BSS's changing parameters + * + * This structure keeps information about a BSS (and an association + * to that BSS) that can change during the lifetime of the BSS. + * + * @assoc: association status + * @aid: association ID number, valid only when @assoc is true + * @use_cts_prot: use CTS protection + * @use_short_preamble: use 802.11b short preamble + */ +struct ieee80211_bss_conf { + /* association related data */ + bool assoc; + u16 aid; + /* erp related data */ + bool use_cts_prot; + bool use_short_preamble; +}; + /* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring * the hardware to use given values (depending on what is supported). */ struct ieee80211_tx_control { + struct ieee80211_vif *vif; int tx_rate; /* Transmit rate, given as the hw specific value for the * rate (from struct ieee80211_rate) */ int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw @@ -332,7 +370,6 @@ struct ieee80211_tx_control { * packet dropping when probing higher rates, if hw * supports multiple retry rates. -1 = not used */ int type; /* internal */ - int ifindex; /* internal */ }; @@ -529,14 +566,28 @@ enum ieee80211_if_types { IEEE80211_IF_TYPE_VLAN, }; +/** + * struct ieee80211_vif - per-interface data + * + * Data in this structure is continually present for driver + * use during the life of a virtual interface. + * + * @type: type of this virtual interface + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *). + */ +struct ieee80211_vif { + enum ieee80211_if_types type; + /* must be last */ + u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + /** * struct ieee80211_if_init_conf - initial configuration of an interface * - * @if_id: internal interface ID. This number has no particular meaning to - * drivers and the only allowed usage is to pass it to - * ieee80211_beacon_get() and ieee80211_get_buffered_bc() functions. - * This field is not valid for monitor interfaces - * (interfaces of %IEEE80211_IF_TYPE_MNTR type). + * @vif: pointer to a driver-use per-interface structure. The pointer + * itself is also used for various functions including + * ieee80211_beacon_get() and ieee80211_get_buffered_bc(). * @type: one of &enum ieee80211_if_types constants. Determines the type of * added/removed interface. * @mac_addr: pointer to MAC address of the interface. This pointer is valid @@ -553,8 +604,8 @@ enum ieee80211_if_types { * in pure monitor mode. */ struct ieee80211_if_init_conf { - int if_id; enum ieee80211_if_types type; + struct ieee80211_vif *vif; void *mac_addr; }; @@ -757,6 +808,9 @@ enum ieee80211_hw_flags { * @rate_control_algorithm: rate control algorithm for this hardware. * If unset (NULL), the default algorithm will be used. Must be * set before calling ieee80211_register_hw(). + * + * @vif_data_size: size (in bytes) of the drv_priv data area + * within &struct ieee80211_vif. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -767,6 +821,7 @@ struct ieee80211_hw { u32 flags; unsigned int extra_tx_headroom; int channel_change_time; + int vif_data_size; u8 queues; s8 max_rssi; s8 max_signal; @@ -905,19 +960,6 @@ enum ieee80211_filter_flags { FIF_OTHER_BSS = 1<<6, }; -/** - * enum ieee80211_erp_change_flags - erp change flags - * - * These flags are used with the erp_ie_changed() callback in - * &struct ieee80211_ops to indicate which parameter(s) changed. - * @IEEE80211_ERP_CHANGE_PROTECTION: protection changed - * @IEEE80211_ERP_CHANGE_PREAMBLE: barker preamble mode changed - */ -enum ieee80211_erp_change_flags { - IEEE80211_ERP_CHANGE_PROTECTION = 1<<0, - IEEE80211_ERP_CHANGE_PREAMBLE = 1<<1, -}; - /** * enum ieee80211_ampdu_mlme_action - A-MPDU actions * @@ -986,6 +1028,14 @@ enum ieee80211_ampdu_mlme_action { * @config_interface: Handler for configuration requests related to interfaces * (e.g. BSSID changes.) * + * @bss_info_changed: Handler for configuration requests related to BSS + * parameters that may vary during BSS's lifespan, and may affect low + * level driver (e.g. assoc/disassoc status, erp parameters). + * This function should not be used if no BSS has been set, unless + * for association indication. The @changed parameter indicates which + * of the bss parameters has changed when a call is made. This callback + * has to be atomic. + * * @configure_filter: Configure the device's RX filter. * See the section "Frame filtering" for more information. * This callback must be implemented and atomic. @@ -1020,8 +1070,6 @@ enum ieee80211_ampdu_mlme_action { * @sta_notify: Notifies low level driver about addition or removal * of assocaited station or AP. * - * @erp_ie_changed: Handle ERP IE change notifications. Must be atomic. - * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. The @queue parameter uses the * %IEEE80211_TX_QUEUE_* constants. Must be atomic. @@ -1076,7 +1124,12 @@ struct ieee80211_ops { struct ieee80211_if_init_conf *conf); int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); int (*config_interface)(struct ieee80211_hw *hw, - int if_id, struct ieee80211_if_conf *conf); + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf); + void (*bss_info_changed)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed); void (*configure_filter)(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, @@ -1094,10 +1147,8 @@ struct ieee80211_ops { int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); int (*set_retry_limit)(struct ieee80211_hw *hw, u32 short_retry, u32 long_retr); - void (*sta_notify)(struct ieee80211_hw *hw, int if_id, + void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, const u8 *addr); - void (*erp_ie_changed)(struct ieee80211_hw *hw, u8 changes, - int cts_protection, int preamble); int (*conf_tx)(struct ieee80211_hw *hw, int queue, const struct ieee80211_tx_queue_params *params); int (*get_tx_stats)(struct ieee80211_hw *hw, @@ -1309,7 +1360,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, /** * ieee80211_beacon_get - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @control: will be filled with information needed to send this beacon. * * If the beacon frames are generated by the host system (i.e., not in @@ -1320,13 +1371,13 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * is responsible of freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - int if_id, + struct ieee80211_vif *vif, struct ieee80211_tx_control *control); /** * ieee80211_rts_get - RTS frame generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). * @frame_txctl: &struct ieee80211_tx_control of the frame. @@ -1337,7 +1388,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * the next RTS frame from the 802.11 code. The low-level is responsible * for calling this function before and RTS frame is needed. */ -void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, +void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, const struct ieee80211_tx_control *frame_txctl, struct ieee80211_rts *rts); @@ -1345,7 +1396,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, /** * ieee80211_rts_duration - Get the duration field for an RTS frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the RTS. * @frame_txctl: &struct ieee80211_tx_control of the frame. * @@ -1353,14 +1404,14 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, int if_id, * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. */ -__le16 ieee80211_rts_duration(struct ieee80211_hw *hw, int if_id, - size_t frame_len, +__le16 ieee80211_rts_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, size_t frame_len, const struct ieee80211_tx_control *frame_txctl); /** * ieee80211_ctstoself_get - CTS-to-self frame generation function * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). * @frame_txctl: &struct ieee80211_tx_control of the frame. @@ -1371,7 +1422,8 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, int if_id, * the next CTS-to-self frame from the 802.11 code. The low-level is responsible * for calling this function before and CTS-to-self frame is needed. */ -void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, +void ieee80211_ctstoself_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, const void *frame, size_t frame_len, const struct ieee80211_tx_control *frame_txctl, struct ieee80211_cts *cts); @@ -1379,7 +1431,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, /** * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. * @frame_txctl: &struct ieee80211_tx_control of the frame. * @@ -1387,28 +1439,30 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, int if_id, * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. */ -__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, int if_id, +__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, size_t frame_len, const struct ieee80211_tx_control *frame_txctl); /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame * @hw: pointer obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame. * @rate: the rate (in 100kbps) at which the frame is going to be transmitted. * * Calculate the duration field of some generic frame, given its * length and transmission rate (in 100kbps). */ -__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, int if_id, +__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, size_t frame_len, int rate); /** * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @if_id: interface ID from &struct ieee80211_if_init_conf. + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @control: will be filled with information needed to send returned frame. * * Function for accessing buffered broadcast and multicast frames. If @@ -1427,7 +1481,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, int if_id, * use common code for all beacons. */ struct sk_buff * -ieee80211_get_buffered_bc(struct ieee80211_hw *hw, int if_id, +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_tx_control *control); /** @@ -1517,7 +1571,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw); */ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, void (*iterator)(void *data, u8 *mac, - int if_id), + struct ieee80211_vif *vif), void *data); #endif /* MAC80211_H */