* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
return local->hw.priv;
}
-/* rate scale requires free function to be implmented */
+/* rate scale requires free function to be implemented */
static void rs_free(void *priv)
{
return;
u8 high = IWL_RATE_INVALID;
u8 low = IWL_RATE_INVALID;
- /* 802.11A walks to the next literal adjascent rate in
+ /* 802.11A walks to the next literal adjacent rate in
* the rate table */
if (unlikely(phymode == MODE_IEEE80211A)) {
int i;
* iwl_fill_rs_info - Fill an output text buffer with the rate representation
*
* NOTE: This is provided as a quick mechanism for a user to visualize
- * the performance of the rate control alogirthm and is not meant to be
+ * the performance of the rate control algorithm and is not meant to be
* parsed software.
*/
extern int iwl_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
/**
* iwl_rate_scale_init - Initialize the rate scale table based on assoc info
*
- * The specific througput table used is based on the type of network
+ * The specific throughput table used is based on the type of network
* the associated with, including A, B, G, and G w/ TGG protection
*/
extern void iwl_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
u8 high = IWL_RATE_INVALID;
u8 low = IWL_RATE_INVALID;
- /* 802.11A or ht walks to the next literal adjascent rate in
+ /* 802.11A or ht walks to the next literal adjacent rate in
* the rate table */
if (is_a_band(rate_type) || !is_legacy(rate_type)) {
int i;
index = IWL_INVALID_VALUE;
update_lq = 1;
- /* get the lowest availabe rate */
+ /* get the lowest available rate */
for (i = 0; i <= IWL_RATE_COUNT; i++) {
if ((1 << i) & rate_scale_index_msk)
index = i;
max_time, good * 100 / samples, good, samples);
else
count += sprintf(&buf[count], "\nAverage rate: 0Mbs\n");
- count += sprintf(&buf[count], "\nrate scale type %d anntena %d "
+ count += sprintf(&buf[count], "\nrate scale type %d antenna %d "
"active_search %d rate index %d\n", lq_type, antenna,
rs_priv->search_better_tbl, sta->last_txrate);
* iwl_fill_rs_info - Fill an output text buffer with the rate representation
*
* NOTE: This is provided as a quick mechanism for a user to visualize
- * the performance of the rate control alogirthm and is not meant to be
+ * the performance of the rate control algorithm and is not meant to be
* parsed software.
*/
extern int iwl_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id);
/**
* iwl_rate_scale_init - Initialize the rate scale table based on assoc info
*
- * The specific througput table used is based on the type of network
+ * The specific throughput table used is based on the type of network
* the associated with, including A, B, G, and G w/ TGG protection
*/
extern void iwl_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
- if (sh < 0) /* tbw something is wrong with indeces */
+ if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64 bits for now */
agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg;
index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
- /* TODO: Need to get this copy more sefely - now good for debug */
+ /* TODO: Need to get this copy more safely - now good for debug */
/*
{
DECLARE_MAC_BUF(mac);
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU Geeral Public License as
+ * it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
txq->txb = kmalloc(sizeof(txq->txb[0]) *
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
if (!txq->txb) {
- IWL_ERROR("kmalloc for auxilary BD "
+ IWL_ERROR("kmalloc for auxiliary BD "
"structures failed\n");
goto error;
}
int len;
int rc = 0;
- /* alocate command space + one big command for scan since scan
+ /* allocate command space + one big command for scan since scan
* command is very huge the system will not have two scan at the
* same time */
len = sizeof(struct iwl_cmd) * slots_num;
*/
/**************************************************************/
-#if 0 /* temparary disable till we add real remove station */
+#if 0 /* temporary disable till we add real remove station */
static u8 iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
{
int index = IWL_INVALID_STATION;
index = i;
}
- /* These twh conditions has the same outcome but keep them separate
+ /* These two conditions has the same outcome but keep them separate
since they have different meaning */
if (unlikely(index == IWL_INVALID_STATION)) {
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
/**
* iwl_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit
- * @priv: staging_rxon is comapred to active_rxon
+ * @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing sufficient to require a new
* tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1
/**
* iwl_commit_rxon - commit staging_rxon to hardware
*
- * The RXON command in staging_rxon is commited to the hardware and
+ * The RXON command in staging_rxon is committed to the hardware and
* the active_rxon structure is updated with the new data. This
* function correctly transitions out of the RXON_ASSOC_MSK state if
* a HW tune is required based on the RXON structure changes.
struct iwl_powertable_cmd cmd;
/* If on battery, set to 3,
- * if plugged into AC power, set to CAM ("continuosly aware mode"),
+ * if plugged into AC power, set to CAM ("continuously aware mode"),
* else user level */
switch (mode) {
case IWL_POWER_BATTERY:
}
/*
- * initilize rxon structure with default values fromm eeprom
+ * initialize rxon structure with default values from eeprom
*/
static void iwl_connection_init_rx_config(struct iwl_priv *priv)
{
return priv->hw_setting.bcast_sta_id;
}
default:
- IWL_WARNING("Unkown mode of operation: %d", priv->iw_mode);
+ IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
return priv->hw_setting.bcast_sta_id;
}
}
* The management in the driver is as follows:
* + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
* iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replensish the iwl->rxq->rx_free.
+ * to replenish the iwl->rxq->rx_free.
* + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
* iwl->rxq is replenished and the READ INDEX is updated (updating the
* 'processed' and 'read' driver indexes as well)
}
/**
- * iwl_rx_replensih - Move all used packet from rx_used to rx_free
+ * iwl_rx_replenish - Move all used packet from rx_used to rx_free
*
* When moving to rx_free an SKB is allocated for the slot.
*
* Also restock the Rx queue via iwl_rx_queue_restock.
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
*/
void iwl_rx_replenish(void *data)
{
}
/**
- * iwl_init_alive_start - Called after REPLY_ALIVE notification receieved
+ * iwl_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
return;
done:
- /* inform mac80211 sacn aborted */
+ /* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
}
}
/* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only
- * what is exposed through include/ declrations */
+ * what is exposed through include/ declarations */
if (unlikely(!iwl_param_disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
IWL_DEBUG_MAC80211("leave - scanning\n");
mutex_unlock(&priv->mutex);
- IWL_DEBUG_INFO("Queing UP work.\n");
+ IWL_DEBUG_INFO("Queueing UP work.\n");
queue_work(priv->workqueue, &priv->up);
txq->txb = kmalloc(sizeof(txq->txb[0]) *
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
if (!txq->txb) {
- IWL_ERROR("kmalloc for auxilary BD "
+ IWL_ERROR("kmalloc for auxiliary BD "
"structures failed\n");
goto error;
}
int len;
int rc = 0;
- /* alocate command space + one big command for scan since scan
+ /* allocate command space + one big command for scan since scan
* command is very huge the system will not have two scan at the
* same time */
len = sizeof(struct iwl_cmd) * slots_num;
/**************************************************************/
-#if 0 /* temparary disable till we add real remove station */
+#if 0 /* temporary disable till we add real remove station */
static u8 iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
{
int index = IWL_INVALID_STATION;
}
- /* These twh conditions has the same outcome but keep them separate
+ /* These two conditions has the same outcome but keep them separate
since they have different meaning */
if (unlikely(index == IWL_INVALID_STATION)) {
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
/**
* iwl_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit
- * @priv: staging_rxon is comapred to active_rxon
+ * @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing sufficient to require a new
* tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1
/**
* iwl_commit_rxon - commit staging_rxon to hardware
*
- * The RXON command in staging_rxon is commited to the hardware and
+ * The RXON command in staging_rxon is committed to the hardware and
* the active_rxon structure is updated with the new data. This
* function correctly transitions out of the RXON_ASSOC_MSK state if
* a HW tune is required based on the RXON structure changes.
struct iwl_powertable_cmd cmd;
/* If on battery, set to 3,
- * if plugged into AC power, set to CAM ("continuosly aware mode"),
+ * if plugged into AC power, set to CAM ("continuously aware mode"),
* else user level */
switch (mode) {
case IWL_POWER_BATTERY:
}
/*
- * initilize rxon structure with default values fromm eeprom
+ * initialize rxon structure with default values from eeprom
*/
static void iwl_connection_init_rx_config(struct iwl_priv *priv)
{
return priv->hw_setting.bcast_sta_id;
default:
- IWL_WARNING("Unkown mode of operation: %d", priv->iw_mode);
+ IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
return priv->hw_setting.bcast_sta_id;
}
}
* The management in the driver is as follows:
* + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
* iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replensish the iwl->rxq->rx_free.
+ * to replenish the iwl->rxq->rx_free.
* + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
* iwl->rxq is replenished and the READ INDEX is updated (updating the
* 'processed' and 'read' driver indexes as well)
}
/**
- * iwl_rx_replensih - Move all used packet from rx_used to rx_free
+ * iwl_rx_replenish - Move all used packet from rx_used to rx_free
*
* When moving to rx_free an SKB is allocated for the slot.
*
* Also restock the Rx queue via iwl_rx_queue_restock.
- * This is called as a scheduled work item (except for during intialization)
+ * This is called as a scheduled work item (except for during initialization)
*/
void iwl_rx_replenish(void *data)
{
}
/**
- * iwl_init_alive_start - Called after REPLY_ALIVE notification receieved
+ * iwl_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
return;
done:
- /* inform mac80211 sacn aborted */
+ /* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
mutex_unlock(&priv->mutex);
}
}
/* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only
- * what is exposed through include/ declrations */
+ * what is exposed through include/ declarations */
if (unlikely(!iwl_param_disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
IWL_DEBUG_MAC80211("leave - scanning\n");
mutex_unlock(&priv->mutex);
- IWL_DEBUG_INFO("Queing UP work.\n");
+ IWL_DEBUG_INFO("Queueing UP work.\n");
queue_work(priv->workqueue, &priv->up);
* Driver implementation data structures, constants, inline
* functions
*
- * NOTE: DO NOT PUT HARDWARE/UCODE SPECIFIC DECLRATIONS HERE
+ * NOTE: DO NOT PUT HARDWARE/UCODE SPECIFIC DECLARATIONS HERE
*
- * Hardware specific declrations go into iwl-*hw.h
+ * Hardware specific declarations go into iwl-*hw.h
*
*/
u8 val;
};
-/* QoS sturctures */
+/* QoS structures */
struct iwl_qos_info {
int qos_enable;
int qos_active;
projects / linux-2.6-omap-h63xx.git / commitdiff