* 14-Jan-2005 BJD Added s3c24xx_init_clocks() call
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
* 14-Mar-2005 BJD Updated for __iomem
+ * 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
*/
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
* published by the Free Software Foundation.
*
* Modifications:
+ * 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
* 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv
* 29-Aug-2004 BJD Added timers 0 through 3
static struct resource s3c_usb_resource[] = {
[0] = {
- .start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
+ .start = S3C24XX_PA_USBHOST,
+ .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_lcd_resource[] = {
[0] = {
- .start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
+ .start = S3C24XX_PA_LCD,
+ .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_usbgadget_resource[] = {
[0] = {
- .start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
+ .start = S3C24XX_PA_USBDEV,
+ .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_wdt_resource[] = {
[0] = {
- .start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
+ .start = S3C24XX_PA_WATCHDOG,
+ .end = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_i2c_resource[] = {
[0] = {
- .start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
+ .start = S3C24XX_PA_IIC,
+ .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_iis_resource[] = {
[0] = {
- .start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
+ .start = S3C24XX_PA_IIS,
+ .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
static struct resource s3c_rtc_resource[] = {
[0] = {
- .start = S3C2410_PA_RTC,
- .end = S3C2410_PA_RTC + 0xff,
+ .start = S3C24XX_PA_RTC,
+ .end = S3C24XX_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_adc_resource[] = {
[0] = {
- .start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_spi0_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI,
- .end = S3C2410_PA_SPI + 0x1f,
+ .start = S3C24XX_PA_SPI,
+ .end = S3C24XX_PA_SPI + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_spi1_resource[] = {
[0] = {
- .start = S3C2410_PA_SPI + 0x20,
- .end = S3C2410_PA_SPI + 0x20 + 0x1f,
+ .start = S3C24XX_PA_SPI + 0x20,
+ .end = S3C24XX_PA_SPI + 0x20 + 0x1f,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_timer0_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x0C,
- .end = S3C2410_PA_TIMER + 0x0C + 0xB,
+ .start = S3C24XX_PA_TIMER + 0x0C,
+ .end = S3C24XX_PA_TIMER + 0x0C + 0xB,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_timer1_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x18,
- .end = S3C2410_PA_TIMER + 0x23,
+ .start = S3C24XX_PA_TIMER + 0x18,
+ .end = S3C24XX_PA_TIMER + 0x23,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_timer2_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x24,
- .end = S3C2410_PA_TIMER + 0x2F,
+ .start = S3C24XX_PA_TIMER + 0x24,
+ .end = S3C24XX_PA_TIMER + 0x2F,
.flags = IORESOURCE_MEM,
},
[1] = {
static struct resource s3c_timer3_resource[] = {
[0] = {
- .start = S3C2410_PA_TIMER + 0x30,
- .end = S3C2410_PA_TIMER + 0x3B,
+ .start = S3C24XX_PA_TIMER + 0x30,
+ .end = S3C24XX_PA_TIMER + 0x3B,
.flags = IORESOURCE_MEM,
},
[1] = {
printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
- dma_base = ioremap(S3C2410_PA_DMA, 0x200);
+ dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
if (dma_base == NULL) {
printk(KERN_ERR "dma failed to remap register block\n");
return -ENOMEM;
@@ load UART to allow us to print the two characters for
@@ resume debug
- mov r2, #S3C2410_PA_UART & 0xff000000
- orr r2, r2, #S3C2410_PA_UART & 0xff000
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
#if 0
/* SMDK2440 LED set */
- mov r14, #S3C2410_PA_GPIO
+ mov r14, #S3C24XX_PA_GPIO
ldr r12, [ r14, #0x54 ]
bic r12, r12, #3<<4
orr r12, r12, #1<<7
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
port->mapbase = res->start;
- port->membase = S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+ port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
port->irq = platform_get_irq(platdev, 0);
ourport->clk = clk_get(&platdev->dev, "uart");
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
- ldreq \rx, = S3C2410_PA_UART
+ ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C2410_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
1003:
mrc p15, 0, \rd, c1, c0
tst \rd, #1
- addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
* 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out
* 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv
* 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names
+ * 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources
*/
#ifndef __ASM_ARCH_MAP_H
#define S3C2400_SDRAM_PA (S3C2400_CS6)
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_PA_IRQ S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2400_PA_LCD
+#define S3C24XX_PA_UART S3C2400_PA_UART
+#define S3C24XX_PA_TIMER S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2400_PA_IIC
+#define S3C24XX_PA_IIS S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC S3C2400_PA_RTC
+#define S3C24XX_PA_ADC S3C2400_PA_ADC
+#define S3C24XX_PA_SPI S3C2400_PA_SPI
+#else
+#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD S3C2410_PA_LCD
+#define S3C24XX_PA_UART S3C2410_PA_UART
+#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC S3C2410_PA_IIC
+#define S3C24XX_PA_IIS S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC S3C2410_PA_RTC
+#define S3C24XX_PA_ADC S3C2410_PA_ADC
+#define S3C24XX_PA_SPI S3C2410_PA_SPI
+#endif
#endif /* __ASM_ARCH_MAP_H */
#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
-#define S3C2410_PA_UART0 (S3C2410_PA_UART)
-#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 )
+#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
#define S3C2410_URXH (0x24)
#define S3C2410_UTXH (0x20)
#undef S3C2410_GPIOREG
#undef S3C2410_WDOGREG
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
-#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
projects / linux-2.6-omap-h63xx.git / commitdiff