rcr = DAVINCI_MCBSP_RCR_RFRLEN1(1);
        xcr = DAVINCI_MCBSP_XCR_XFIG | DAVINCI_MCBSP_XCR_XFRLEN1(1);
        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-       case SND_SOC_DAIFMT_RIGHT_J:
+       case SND_SOC_DAIFMT_DSP_B:
                break;
        case SND_SOC_DAIFMT_I2S:
-       case SND_SOC_DAIFMT_DSP_B:
+               /* Davinci doesn't support TRUE I2S, but some codecs will have
+                * the left and right channels contiguous. This allows
+                * dsp_a mode to be used with an inverted normal frame clk.
+                * If your codec is master and does not have contiguous
+                * channels, then you will have sound on only one channel.
+                * Try using a different mode, or codec as slave.
+                *
+                * The TLV320AIC33 is an example of a codec where this works.
+                * It has a variable bit clock frequency allowing it to have
+                * valid data on every bit clock.
+                *
+                * The TLV320AIC23 is an example of a codec where this does not
+                * work. It has a fixed bit clock frequency with progressively
+                * more empty bit clock slots between channels as the sample
+                * rate is lowered.
+                */
+               fmt ^= SND_SOC_DAIFMT_NB_IF;
+       case SND_SOC_DAIFMT_DSP_A:
                rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
                xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
                break;