#define CPU_WIN_DEV_CS1 6
#define CPU_WIN_DEV_CS2 7
-/*
- * PCIE Address Decode Windows registers
- */
-#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
-#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
-#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
-#define PCIE_WIN_CTRL(n) (((n) < 5) ? \
- ORION_PCIE_REG(0x1820 + ((n) << 4)) : \
- ORION_PCIE_REG(0x1880))
-#define PCIE_WIN_BASE(n) (((n) < 5) ? \
- ORION_PCIE_REG(0x1824 + ((n) << 4)) : \
- ORION_PCIE_REG(0x1884))
-#define PCIE_WIN_REMAP(n) (((n) < 5) ? \
- ORION_PCIE_REG(0x182c + ((n) << 4)) : \
- ORION_PCIE_REG(0x188c))
-#define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0)
-#define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0)
-#define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4)
-#define PCIE_MAX_BARS 3
-#define PCIE_MAX_WINS 6
-
-/*
- * Use PCIE BAR '1' for all DDR banks
- */
-#define PCIE_DRAM_BAR 1
-
-/*
- * PCI Address Decode Windows registers
- */
-#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
- ((n) == 1) ? ORION_PCI_REG(0xd08) : \
- ((n) == 2) ? ORION_PCI_REG(0xc0c) : \
- ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
- ((n) == 1) ? ORION_PCI_REG(0xd48) : \
- ((n) == 2) ? ORION_PCI_REG(0xc4c) : \
- ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
-#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
-#define PCI_CTRL_BASE_LO(n) ORION_PCI_REG(0x1e00 | ((n) << 4))
-#define PCI_CTRL_BASE_HI(n) ORION_PCI_REG(0x1e04 | ((n) << 4))
-#define PCI_CTRL_SIZE(n) ORION_PCI_REG(0x1e08 | ((n) << 4))
-#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
-
-/*
- * PCI configuration heleprs for BAR settings
- */
-#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
-#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
-#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
-
/*
* Gigabit Ethernet Address Decode Windows registers
*/
orion_mbus_dram_info.num_cs = cs;
}
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
- * WIN[0-3] -> DRAM bank[0-3]
- */
-void __init orion_setup_pcie_wins(void)
-{
- u32 base, size, i;
-
- /*
- * First, disable and clear BARs and windows
- */
- for (i = 1; i < PCIE_MAX_BARS; i++) {
- orion_write(PCIE_BAR_CTRL(i), 0);
- orion_write(PCIE_BAR_LO(i), 0);
- orion_write(PCIE_BAR_HI(i), 0);
- }
-
- for (i = 0; i < PCIE_MAX_WINS; i++) {
- orion_write(PCIE_WIN_CTRL(i), 0);
- orion_write(PCIE_WIN_BASE(i), 0);
- orion_write(PCIE_WIN_REMAP(i), 0);
- }
-
- /*
- * Setup windows for DDR banks. Count total DDR size on the fly.
- */
- base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
- size = 0;
- for (i = 0; i < DDR_MAX_CS; i++) {
- u32 bank_base, bank_size;
- bank_size = orion_read(DDR_SIZE_CS(i));
- bank_base = orion_read(DDR_BASE_CS(i));
- if (bank_size & DDR_BANK_EN) {
- bank_size = DDR_REG_TO_SIZE(bank_size);
- bank_base = DDR_REG_TO_BASE(bank_base);
- orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
- orion_write(PCIE_WIN_REMAP(i), 0);
- orion_write(PCIE_WIN_CTRL(i),
- ((bank_size-1) & 0xffff0000) |
- (ATTR_DDR_CS(i) << 8) |
- (TARGET_DDR << 4) |
- (PCIE_DRAM_BAR << 1) | WIN_EN);
- size += bank_size;
- }
- }
-
- /*
- * Setup BAR[1] to all DRAM banks
- */
- orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
- orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
- orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
- ((size - 1) & 0xffff0000) | WIN_EN);
-}
-
-void __init orion_setup_pci_wins(void)
-{
- u32 base, size, i;
-
- /*
- * First, disable windows
- */
- orion_write(PCI_BAR_ENABLE, 0xffffffff);
-
- /*
- * Setup windows for DDR banks.
- */
- for (i = 0; i < DDR_MAX_CS; i++) {
- base = orion_read(DDR_BASE_CS(i));
- size = orion_read(DDR_SIZE_CS(i));
- if (size & DDR_BANK_EN) {
- u32 bus, dev, func, reg, val;
- size = DDR_REG_TO_SIZE(size);
- base = DDR_REG_TO_BASE(base);
- bus = orion_pci_local_bus_nr();
- dev = orion_pci_local_dev_nr();
- func = PCI_CONF_FUNC_BAR_CS(i);
- reg = PCI_CONF_REG_BAR_LO_CS(i);
- orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
- orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
- (base & 0xfffff000) | (val & 0xfff));
- reg = PCI_CONF_REG_BAR_HI_CS(i);
- orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
- orion_write(PCI_BAR_SIZE_DDR_CS(i),
- (size - 1) & 0xfffff000);
- orion_write(PCI_BAR_REMAP_DDR_CS(i),
- base & 0xfffff000);
- orion_clrbits(PCI_BAR_ENABLE, (1 << i));
- }
- }
-
- /*
- * Disable automatic update of address remaping when writing to BARs
- */
- orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
-}
-
void __init orion_setup_usb_wins(void)
{
int i;
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include "common.h"
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
#define PCIE_CONF_ADDR_EN (1 << 31)
+/*
+ * PCIE Address Decode Windows registers
+ */
+#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
+#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8))
+#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8))
+#define PCIE_WIN_CTRL(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x1820 + ((n) << 4)) : \
+ ORION_PCIE_REG(0x1880))
+#define PCIE_WIN_BASE(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x1824 + ((n) << 4)) : \
+ ORION_PCIE_REG(0x1884))
+#define PCIE_WIN_REMAP(n) (((n) < 5) ? \
+ ORION_PCIE_REG(0x182c + ((n) << 4)) : \
+ ORION_PCIE_REG(0x188c))
+#define PCIE_MAX_BARS 3
+#define PCIE_MAX_WINS 6
+
+/*
+ * Use PCIE BAR '1' for all DDR banks
+ */
+#define PCIE_DRAM_BAR 1
+
/*
* PCIE config cycles are done by programming the PCIE_CONF_ADDR register
* and then reading the PCIE_CONF_DATA register. Need to make sure these
orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS);
}
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void orion_setup_pcie_wins(struct mbus_dram_target_info *dram)
+{
+ u32 size;
+ int i;
+
+ /*
+ * First, disable and clear BARs and windows
+ */
+ for (i = 1; i < PCIE_MAX_BARS; i++) {
+ writel(0, PCIE_BAR_CTRL(i));
+ writel(0, PCIE_BAR_LO(i));
+ writel(0, PCIE_BAR_HI(i));
+ }
+
+ for (i = 0; i < PCIE_MAX_WINS; i++) {
+ writel(0, PCIE_WIN_CTRL(i));
+ writel(0, PCIE_WIN_BASE(i));
+ writel(0, PCIE_WIN_REMAP(i));
+ }
+
+ /*
+ * Setup windows for DDR banks. Count total DDR size on the fly.
+ */
+ size = 0;
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(cs->base & 0xffff0000, PCIE_WIN_BASE(i));
+ writel(0, PCIE_WIN_REMAP(i));
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) |
+ (PCIE_DRAM_BAR << 1) | 1, PCIE_WIN_CTRL(i));
+
+ size += cs->size;
+ }
+
+ /*
+ * Setup BAR[1] to all DRAM banks
+ */
+ writel(dram->cs[0].base, PCIE_BAR_LO(PCIE_DRAM_BAR));
+ writel(0, PCIE_BAR_HI(PCIE_DRAM_BAR));
+ writel(((size - 1) & 0xffff0000) | 1, PCIE_BAR_CTRL(PCIE_DRAM_BAR));
+}
+
static void orion_pcie_master_slave_enable(void)
{
orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER |
{
struct resource *res;
+ /*
+ * Point PCIe unit MBUS decode windows to DRAM space.
+ */
+ orion_setup_pcie_wins(&orion_mbus_dram_info);
+
/*
* Master + Slave enable
*/
#define PCIX_STAT_BUS_OFFS 8
#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS)
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd08) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc0c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \
+ ((n) == 1) ? ORION_PCI_REG(0xd48) : \
+ ((n) == 2) ? ORION_PCI_REG(0xc4c) : \
+ ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
+#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c)
+#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration helpers for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14)
+
/*
* PCI config cycles are done by programming the PCI_CONF_ADDR register
* and then reading the PCI_CONF_DATA register. Need to make sure these
return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
}
-u32 orion_pci_local_dev_nr(void)
+static u32 orion_pci_local_dev_nr(void)
{
u32 conf = orion_read(PCI_P2P_CONF);
return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS);
}
-int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
+static int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
u32 where, u32 size, u32 *val)
{
unsigned long flags;
return PCIBIOS_SUCCESSFUL;
}
-int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
+static int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
u32 where, u32 size, u32 val)
{
unsigned long flags;
orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7);
}
+static void orion_setup_pci_wins(struct mbus_dram_target_info *dram)
+{
+ u32 win_enable;
+ u32 bus;
+ u32 dev;
+ int i;
+
+ /*
+ * First, disable windows.
+ */
+ win_enable = 0xffffffff;
+ orion_write(PCI_BAR_ENABLE, win_enable);
+
+ /*
+ * Setup windows for DDR banks.
+ */
+ bus = orion_pci_local_bus_nr();
+ dev = orion_pci_local_dev_nr();
+
+ for (i = 0; i < dram->num_cs; i++) {
+ struct mbus_dram_window *cs = dram->cs + i;
+ u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
+ u32 reg;
+ u32 val;
+
+ /*
+ * Write DRAM bank base address register.
+ */
+ reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index);
+ orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
+ val = (cs->base & 0xfffff000) | (val & 0xfff);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4, val);
+
+ /*
+ * Write DRAM bank size register.
+ */
+ reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
+ orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
+ orion_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
+ (cs->size - 1) & 0xfffff000);
+ orion_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
+ cs->base & 0xfffff000);
+
+ /*
+ * Enable decode window for this chip select.
+ */
+ win_enable &= ~(1 << cs->cs_index);
+ }
+
+ /*
+ * Re-enable decode windows.
+ */
+ orion_write(PCI_BAR_ENABLE, win_enable);
+
+ /*
+ * Disable automatic update of address remaping when writing to BARs.
+ */
+ orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
static int orion_pci_setup(struct pci_sys_data *sys)
{
struct resource *res;
+ /*
+ * Point PCI unit MBUS decode windows to DRAM space.
+ */
+ orion_setup_pci_wins(&orion_mbus_dram_info);
+
/*
* Master + Slave enable
*/
projects / linux-2.6-omap-h63xx.git / commitdiff