# Makefile for the STMicroelectronics Overdrive specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o led.o time.o
+obj-y := mach.o setup.o io.o irq.o led.o
obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o
#include <asm/overdrive/overdrive.h>
#include <asm/overdrive/fpga.h>
-extern void od_time_init(void);
-
const char *get_system_type(void)
{
return "SH7750 Overdrive";
{
#ifdef CONFIG_PCI
init_overdrive_fpga();
- galileo_init();
+ galileo_init();
#endif
- board_time_init = od_time_init;
-
/* Enable RS232 receive buffers */
writel(0x1e, OVERDRIVE_CTRL);
}
+++ /dev/null
-/*
- * arch/sh/boards/overdrive/time.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- * Copyright (C) 2002 Paul Mundt (lethal@chaoticdreams.org)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * STMicroelectronics Overdrive Support.
- */
-
-void od_time_init(void)
-{
- struct frqcr_data {
- unsigned short frqcr;
- struct {
- unsigned char multiplier;
- unsigned char divisor;
- } factor[3];
- };
-
- static struct frqcr_data st40_frqcr_table[] = {
- { 0x000, {{1,1}, {1,1}, {1,2}}},
- { 0x002, {{1,1}, {1,1}, {1,4}}},
- { 0x004, {{1,1}, {1,1}, {1,8}}},
- { 0x008, {{1,1}, {1,2}, {1,2}}},
- { 0x00A, {{1,1}, {1,2}, {1,4}}},
- { 0x00C, {{1,1}, {1,2}, {1,8}}},
- { 0x011, {{1,1}, {2,3}, {1,6}}},
- { 0x013, {{1,1}, {2,3}, {1,3}}},
- { 0x01A, {{1,1}, {1,2}, {1,4}}},
- { 0x01C, {{1,1}, {1,2}, {1,8}}},
- { 0x023, {{1,1}, {2,3}, {1,3}}},
- { 0x02C, {{1,1}, {1,2}, {1,8}}},
- { 0x048, {{1,2}, {1,2}, {1,4}}},
- { 0x04A, {{1,2}, {1,2}, {1,6}}},
- { 0x04C, {{1,2}, {1,2}, {1,8}}},
- { 0x05A, {{1,2}, {1,3}, {1,6}}},
- { 0x05C, {{1,2}, {1,3}, {1,6}}},
- { 0x063, {{1,2}, {1,4}, {1,4}}},
- { 0x06C, {{1,2}, {1,4}, {1,8}}},
- { 0x091, {{1,3}, {1,3}, {1,6}}},
- { 0x093, {{1,3}, {1,3}, {1,6}}},
- { 0x0A3, {{1,3}, {1,6}, {1,6}}},
- { 0x0DA, {{1,4}, {1,4}, {1,8}}},
- { 0x0DC, {{1,4}, {1,4}, {1,8}}},
- { 0x0EC, {{1,4}, {1,8}, {1,8}}},
- { 0x123, {{1,4}, {1,4}, {1,8}}},
- { 0x16C, {{1,4}, {1,8}, {1,8}}},
- };
-
- struct memclk_data {
- unsigned char multiplier;
- unsigned char divisor;
- };
- static struct memclk_data st40_memclk_table[8] = {
- {1,1}, // 000
- {1,2}, // 001
- {1,3}, // 010
- {2,3}, // 011
- {1,4}, // 100
- {1,6}, // 101
- {1,8}, // 110
- {1,8} // 111
- };
-
- unsigned long pvr;
-
- /*
- * This should probably be moved into the SH3 probing code, and then
- * use the processor structure to determine which CPU we are running
- * on.
- */
- pvr = ctrl_inl(CCN_PVR);
- printk("PVR %08x\n", pvr);
-
- if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) {
- /*
- * Unfortunatly the STB1 FRQCR values are different from the
- * 7750 ones.
- */
- struct frqcr_data *d;
- int a;
- unsigned long memclkcr;
- struct memclk_data *e;
-
- for (a=0; a<ARRAY_SIZE(st40_frqcr_table); a++) {
- d = &st40_frqcr_table[a];
- if (d->frqcr == (frqcr & 0x1ff))
- break;
- }
- if (a == ARRAY_SIZE(st40_frqcr_table)) {
- d = st40_frqcr_table;
- printk("ERROR: Unrecognised FRQCR value, using default multipliers\n");
- }
-
- memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
- e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
-
- printk("Clock multipliers: CPU: %d/%d Bus: %d/%d Mem: %d/%d Periph: %d/%d\n",
- d->factor[0].multiplier, d->factor[0].divisor,
- d->factor[1].multiplier, d->factor[1].divisor,
- e->multiplier, e->divisor,
- d->factor[2].multiplier, d->factor[2].divisor);
-
- current_cpu_data.master_clock = current_cpu_data.module_clock *
- d->factor[2].divisor /
- d->factor[2].multiplier;
- current_cpu_data.bus_clock = current_cpu_data.master_clock *
- d->factor[1].multiplier /
- d->factor[1].divisor;
- current_cpu_data.memory_clock = current_cpu_data.master_clock *
- e->multiplier / e->divisor;
- current_cpu_data.cpu_clock = current_cpu_data.master_clock *
- d->factor[0].multiplier /
- d->factor[0].divisor;
-}
-
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/clock.c - SuperH clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This clock framework is derived from the OMAP version by:
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/timer.h>
+
+static LIST_HEAD(clock_list);
+static DEFINE_SPINLOCK(clock_lock);
+static DECLARE_MUTEX(clock_list_sem);
+
+/*
+ * Each subtype is expected to define the init routines for these clocks,
+ * as each subtype (or processor family) will have these clocks at the
+ * very least. These are all provided through the CPG, which even some of
+ * the more quirky parts (such as ST40, SH4-202, etc.) still have.
+ *
+ * The processor-specific code is expected to register any additional
+ * clock sources that are of interest.
+ */
+static struct clk master_clk = {
+ .name = "master_clk",
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+#ifdef CONFIG_SH_PCLK_FREQ_BOOL
+ .rate = CONFIG_SH_PCLK_FREQ,
+#endif
+};
+
+static struct clk module_clk = {
+ .name = "module_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+};
+
+static struct clk bus_clk = {
+ .name = "bus_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED,
+};
+
+/*
+ * The ordering of these clocks matters, do not change it.
+ */
+static struct clk *onchip_clocks[] = {
+ &master_clk,
+ &module_clk,
+ &bus_clk,
+ &cpu_clk,
+};
+
+static void propagate_rate(struct clk *clk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clock_list, node) {
+ if (likely(clkp->parent != clk))
+ continue;
+ if (likely(clkp->ops && clkp->ops->recalc))
+ clkp->ops->recalc(clkp);
+ }
+}
+
+int __clk_enable(struct clk *clk)
+{
+ /*
+ * See if this is the first time we're enabling the clock, some
+ * clocks that are always enabled still require "special"
+ * initialization. This is especially true if the clock mode
+ * changes and the clock needs to hunt for the proper set of
+ * divisors to use before it can effectively recalc.
+ */
+ if (unlikely(atomic_read(&clk->kref.refcount) == 1))
+ if (clk->ops && clk->ops->init)
+ clk->ops->init(clk);
+
+ if (clk->flags & CLK_ALWAYS_ENABLED)
+ return 0;
+
+ if (likely(clk->ops && clk->ops->enable))
+ clk->ops->enable(clk);
+
+ kref_get(&clk->kref);
+ return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = __clk_enable(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+
+ return ret;
+}
+
+static void clk_kref_release(struct kref *kref)
+{
+ /* Nothing to do */
+}
+
+void __clk_disable(struct clk *clk)
+{
+ if (clk->flags & CLK_ALWAYS_ENABLED)
+ return;
+
+ kref_put(&clk->kref, clk_kref_release);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+}
+
+int clk_register(struct clk *clk)
+{
+ down(&clock_list_sem);
+
+ list_add(&clk->node, &clock_list);
+ kref_init(&clk->kref);
+
+ up(&clock_list_sem);
+
+ return 0;
+}
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clock_list_sem);
+ list_del(&clk->node);
+ up(&clock_list_sem);
+}
+
+inline unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EOPNOTSUPP;
+
+ if (likely(clk->ops && clk->ops->set_rate)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = clk->ops->set_rate(clk, rate);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ return ret;
+}
+
+void clk_recalc_rate(struct clk *clk)
+{
+ if (likely(clk->ops && clk->ops->recalc)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ clk->ops->recalc(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+}
+
+struct clk *clk_get(const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clock_list_sem);
+ list_for_each_entry(p, &clock_list, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clock_list_sem);
+
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+}
+
+void __init __attribute__ ((weak))
+arch_init_clk_ops(struct clk_ops **ops, int type)
+{
+}
+
+int __init clk_init(void)
+{
+ int i, ret = 0;
+
+ if (unlikely(!master_clk.rate))
+ /*
+ * NOTE: This will break if the default divisor has been
+ * changed.
+ *
+ * No one should be changing the default on us however,
+ * expect that a sane value for CONFIG_SH_PCLK_FREQ will
+ * be defined in the event of a different divisor.
+ */
+ master_clk.rate = get_timer_frequency() * 4;
+
+ for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
+ struct clk *clk = onchip_clocks[i];
+
+ arch_init_clk_ops(&clk->ops, i);
+ ret |= clk_register(clk);
+ clk_enable(clk);
+ }
+
+ /* Kick the child clocks.. */
+ propagate_rate(&master_clk);
+ propagate_rate(&bus_clk);
+
+ return ret;
+}
+
+int show_clocks(struct seq_file *m)
+{
+ struct clk *clk;
+
+ list_for_each_entry_reverse(clk, &clock_list, node) {
+ unsigned long rate = clk_get_rate(clk);
+
+ /*
+ * Don't bother listing dummy clocks with no ancestry
+ * that only support enable and disable ops.
+ */
+ if (unlikely(!rate && !clk->parent))
+ continue;
+
+ seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name,
+ rate / 1000000, (rate % 1000000) / 10000);
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(clk_register);
+EXPORT_SYMBOL_GPL(clk_unregister);
+EXPORT_SYMBOL_GPL(clk_get);
+EXPORT_SYMBOL_GPL(clk_put);
+EXPORT_SYMBOL_GPL(clk_enable);
+EXPORT_SYMBOL_GPL(clk_disable);
+EXPORT_SYMBOL_GPL(__clk_enable);
+EXPORT_SYMBOL_GPL(__clk_disable);
+EXPORT_SYMBOL_GPL(clk_get_rate);
+EXPORT_SYMBOL_GPL(clk_set_rate);
+EXPORT_SYMBOL_GPL(clk_recalc_rate);
obj-y := ex.o probe.o
+clock-$(CONFIG_CPU_SH3) := clock-sh3.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
+
+obj-y += $(clock-y)
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh3.c
+ *
+ * Generic SH-3 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh3_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh3_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+ clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh3_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh3_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh3_clk_ops[] = {
+ &sh3_master_clk_ops,
+ &sh3_module_clk_ops,
+ &sh3_bus_clk_ops,
+ &sh3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh3_clk_ops))
+ *ops = sh3_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7300.c
+ *
+ * SH7300 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh7300_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7300_clk_ops[] = {
+ &sh7300_master_clk_ops,
+ &sh7300_module_clk_ops,
+ &sh7300_bus_clk_ops,
+ &sh7300_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7300_clk_ops))
+ *ops = sh7300_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ *
+ * SH7705 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+/*
+ * SH7705 uses the same divisors as the generic SH-3 case, it's just the
+ * FRQCR layout that is a bit different..
+ */
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003];
+}
+
+static struct clk_ops sh7705_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ctrl_inw(FRQCR) & 0x0003;
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7705_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
+ clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh7705_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7705_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7705_clk_ops[] = {
+ &sh7705_master_clk_ops,
+ &sh7705_module_clk_ops,
+ &sh7705_bus_clk_ops,
+ &sh7705_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7705_clk_ops))
+ *ops = sh7705_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ *
+ * SH7709 support for the clock framework
+ *
+ * Copyright (C) 2005 Andriy Skulysh
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void set_bus_parent(struct clk *clk)
+{
+ struct clk *bus_clk = clk_get("bus_clk");
+ clk->parent = bus_clk;
+ clk_put(bus_clk);
+}
+
+static void master_clk_init(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh7709_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7709_module_clk_ops = {
+#ifdef CLOCK_MODE_0_1_2_7
+ .init = set_bus_parent,
+#endif
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = (frqcr & 0x0080) ?
+ ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
+
+ clk->rate = clk->parent->rate * stc_multipliers[idx];
+}
+
+static struct clk_ops sh7709_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7709_cpu_clk_ops = {
+ .init = set_bus_parent,
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7709_clk_ops[] = {
+ &sh7709_master_clk_ops,
+ &sh7709_module_clk_ops,
+ &sh7709_bus_clk_ops,
+ &sh7709_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7709_clk_ops))
+ *ops = sh7709_clk_ops[idx];
+}
obj-y := ex.o probe.o
obj-$(CONFIG_SH_FPU) += fpu.o
-obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += irq_intc2.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SH4) := clock-sh4.o
+clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
+
+# Additional clocks by subtype
+clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
+
+obj-y += $(clock-y)
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+ *
+ * Additional SH4-202 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+#define CPG2_FRQCR3 0xfe0a0018
+
+static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
+static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
+
+static void emi_clk_recalc(struct clk *clk)
+{
+ int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
+{
+ int divisor = clk->parent->rate / rate;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
+ if (frqcr3_divisors[i] == divisor)
+ return frqcr3_values[i];
+
+ /* Safe fallback */
+ return 5;
+}
+
+static struct clk_ops sh4202_emi_clk_ops = {
+ .recalc = emi_clk_recalc,
+};
+
+static struct clk sh4202_emi_clk = {
+ .name = "emi_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_emi_clk_ops,
+};
+
+static void femi_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static struct clk_ops sh4202_femi_clk_ops = {
+ .recalc = femi_clk_recalc,
+};
+
+static struct clk sh4202_femi_clk = {
+ .name = "femi_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_femi_clk_ops,
+};
+
+static void shoc_clk_init(struct clk *clk)
+{
+ int i;
+
+ /*
+ * For some reason, the shoc_clk seems to be set to some really
+ * insane value at boot (values outside of the allowable frequency
+ * range for instance). We deal with this by scaling it back down
+ * to something sensible just in case.
+ *
+ * Start scaling from the high end down until we find something
+ * that passes rate verification..
+ */
+ for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
+ int divisor = frqcr3_divisors[i];
+
+ if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
+ break;
+ }
+
+ WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
+}
+
+static void shoc_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *bclk = clk_get("bus_clk");
+ unsigned long bclk_rate = clk_get_rate(bclk);
+
+ clk_put(bclk);
+
+ if (rate > bclk_rate)
+ return 1;
+ if (rate > 66000000)
+ return 1;
+
+ return 0;
+}
+
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long frqcr3;
+ unsigned int tmp;
+
+ /* Make sure we have something sensible to switch to */
+ if (shoc_clk_verify_rate(clk, rate) != 0)
+ return -EINVAL;
+
+ tmp = frqcr3_lookup(clk, rate);
+
+ frqcr3 = ctrl_inl(CPG2_FRQCR3);
+ frqcr3 &= ~(0x0007 << 6);
+ frqcr3 |= tmp << 6;
+ ctrl_outl(frqcr3, CPG2_FRQCR3);
+
+ clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
+
+ return 0;
+}
+
+static struct clk_ops sh4202_shoc_clk_ops = {
+ .init = shoc_clk_init,
+ .recalc = shoc_clk_recalc,
+ .set_rate = shoc_clk_set_rate,
+};
+
+static struct clk sh4202_shoc_clk = {
+ .name = "shoc_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_shoc_clk_ops,
+};
+
+static struct clk *sh4202_onchip_clocks[] = {
+ &sh4202_emi_clk,
+ &sh4202_femi_clk,
+ &sh4202_shoc_clk,
+};
+
+static int __init sh4202_clk_init(void)
+{
+ struct clk *clk = clk_get("master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
+ struct clk *clkp = sh4202_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+
+arch_initcall(sh4202_clk_init);
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4.c
+ *
+ * Generic SH-4 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
+#define bfc_divisors ifc_divisors /* Same */
+static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh4_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh4_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh4_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh4_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh4_clk_ops[] = {
+ &sh4_master_clk_ops,
+ &sh4_module_clk_ops,
+ &sh4_bus_clk_ops,
+ &sh4_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh4_clk_ops))
+ *ops = sh4_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh73180.c
+ *
+ * SH73180 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+/*
+ * SH73180 uses a common set of divisors, so this is quite simple..
+ */
+static int divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= divisors[ctrl_inl(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh73180_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 12) & 0x0007;
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 20) & 0x0007;
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh73180_clk_ops[] = {
+ &sh73180_master_clk_ops,
+ &sh73180_module_clk_ops,
+ &sh73180_bus_clk_ops,
+ &sh73180_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh73180_clk_ops))
+ *ops = sh73180_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7770.c
+ *
+ * SH7770 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
+static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f];
+}
+
+static struct clk_ops sh7770_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7770_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x000f);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7770_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7770_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7770_clk_ops[] = {
+ &sh7770_master_clk_ops,
+ &sh7770_module_clk_ops,
+ &sh7770_bus_clk_ops,
+ &sh7770_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7770_clk_ops))
+ *ops = sh7770_clk_ops[idx];
+}
+
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7780.c
+ *
+ * SH7780 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 2, 4 };
+static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
+static int pfc_divisors[] = { 1, 24, 24, 1 };
+static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003];
+}
+
+static struct clk_ops sh7780_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x0003);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7780_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7780_clk_ops[] = {
+ &sh7780_master_clk_ops,
+ &sh7780_module_clk_ops,
+ &sh7780_bus_clk_ops,
+ &sh7780_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7780_clk_ops))
+ *ops = sh7780_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
+ clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk sh7780_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7780_shyway_clk_ops,
+};
+
+/*
+ * Additional SH7780-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7780_onchip_clocks[] = {
+ &sh7780_shyway_clk,
+};
+
+static int __init sh7780_clk_init(void)
+{
+ struct clk *clk = clk_get("master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
+ struct clk *clkp = sh7780_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+
+arch_initcall(sh7780_clk_init);
+
*
* Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt
* Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
*
* Some code taken from i386 version.
*/
#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp.h>
#include <linux/profile.h>
-
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/machvec.h>
+#include <asm/clock.h>
#include <asm/rtc.h>
-#include <asm/freq.h>
-#include <asm/cpu/timer.h>
-#ifdef CONFIG_SH_KGDB
+#include <asm/timer.h>
#include <asm/kgdb.h>
-#endif
-
-#include <linux/timex.h>
-#include <linux/irq.h>
-
-#define TMU_TOCR_INIT 0x00
-#define TMU0_TCR_INIT 0x0020
-#define TMU_TSTR_INIT 1
-
-#define TMU0_TCR_CALIB 0x0000
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-#define CLOCKGEN_MEMCLKCR 0xbb040038
-#define MEMCLKCR_RATIO_MASK 0x7
-#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
extern unsigned long wall_jiffies;
-#define TICK_SIZE (tick_nsec / 1000)
-DEFINE_SPINLOCK(tmu0_lock);
+struct sys_timer *sys_timer;
+
+/* Move this somewhere more sensible.. */
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
* these routines anywhere... */
int (*rtc_set_time)(const time_t);
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-#endif
-#if defined(CONFIG_CPU_SH3)
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int stc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#define bfc_divisors stc_multipliers
-#define bfc_values stc_values
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int ifc_values[] = { 0, 1, 4, 2, 0, 0, 0, 0 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int pfc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
-static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-#define bfc_divisors ifc_divisors /* Same */
-#define bfc_values ifc_values
-#define pfc_divisors ifc_divisors /* Same */
-#define pfc_values ifc_values
-#else
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-static int ifc_values[] = { 0, 1, 2, 3, 0, 4, 0, 5 };
-#define bfc_divisors ifc_divisors /* Same */
-#define bfc_values ifc_values
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-static int pfc_values[] = { 0, 0, 1, 2, 0, 3, 0, 4 };
-#endif
-#else
-#error "Unknown ifc/bfc/pfc/stc values for this processor"
-#endif
-
/*
* Scheduler clock - returns current time in nanosec units.
*/
-unsigned long long sched_clock(void)
+unsigned long long __attribute__ ((weak)) sched_clock(void)
{
return (unsigned long long)jiffies * (1000000000 / HZ);
}
-static unsigned long do_gettimeoffset(void)
-{
- int count;
- unsigned long flags;
-
- static int count_p = 0x7fffffff; /* for the first call after boot */
- static unsigned long jiffies_p = 0;
-
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
-
- spin_lock_irqsave(&tmu0_lock, flags);
- /* timer count may underflow right here */
- count = ctrl_inl(TMU0_TCNT); /* read the latched count */
-
- jiffies_t = jiffies;
-
- /*
- * avoiding timer inconsistencies (they are rare, but they happen)...
- * there is one kind of problem that must be avoided here:
- * 1. the timer counter underflows
- */
-
- if( jiffies_t == jiffies_p ) {
- if( count > count_p ) {
- /* the nutcase */
-
- if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */
- /*
- * We cannot detect lost timer interrupts ...
- * well, that's why we call them lost, don't we? :)
- * [hmm, on the Pentium and Alpha we can ... sort of]
- */
- count -= LATCH;
- } else {
- printk("do_slow_gettimeoffset(): hardware timer problem?\n");
- }
- }
- } else
- jiffies_p = jiffies_t;
-
- count_p = count;
- spin_unlock_irqrestore(&tmu0_lock, flags);
-
- count = ((LATCH-1) - count) * TICK_SIZE;
- count = (count + LATCH/2) / LATCH;
-
- return count;
-}
-
void do_gettimeofday(struct timeval *tv)
{
unsigned long seq;
do {
seq = read_seqbegin(&xtime_lock);
- usec = do_gettimeoffset();
+ usec = get_timer_offset();
lost = jiffies - wall_jiffies;
if (lost)
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
- nsec -= 1000 * (do_gettimeoffset() +
+ nsec -= 1000 * (get_timer_offset() +
(jiffies - wall_jiffies) * (1000000 / HZ));
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
static long last_rtc_update;
/*
- * timer_interrupt() needs to keep up the real-time clock,
+ * handle_timer_tick() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+void handle_timer_tick(struct pt_regs *regs)
{
do_timer(regs);
#ifndef CONFIG_SMP
if (rtc_set_time(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
- last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
}
}
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned long timer_status;
-
- /* Clear UNF bit */
- timer_status = ctrl_inw(TMU0_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU0_TCR);
-
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_seqlock(&xtime_lock);
- do_timer_interrupt(irq, regs);
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Hah! We'll see if this works (switching from usecs to nsecs).
- */
-static unsigned int __init get_timer_frequency(void)
-{
- u32 freq;
- struct timespec ts1, ts2;
- unsigned long diff_nsec;
- unsigned long factor;
-
- /* Setup the timer: We don't want to generate interrupts, just
- * have it count down at its natural rate.
- */
- ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
- ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR);
- ctrl_outl(0xffffffff, TMU0_TCOR);
- ctrl_outl(0xffffffff, TMU0_TCNT);
-
- rtc_get_time(&ts2);
-
- do {
- rtc_get_time(&ts1);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- /* actually start the timer */
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-
- do {
- rtc_get_time(&ts2);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
- if (ts2.tv_nsec < ts1.tv_nsec) {
- ts2.tv_nsec += 1000000000;
- ts2.tv_sec--;
- }
-
- diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
-
- /* this should work well if the RTC has a precision of n Hz, where
- * n is an integer. I don't think we have to worry about the other
- * cases. */
- factor = (1000000000 + diff_nsec/2) / diff_nsec;
-
- if (factor * diff_nsec > 1100000000 ||
- factor * diff_nsec < 900000000)
- panic("weird RTC (diff_nsec %ld)", diff_nsec);
-
- return freq * factor;
-}
-
-void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
-
-static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ;
-
-static int __init sh_pclk_setup(char *str)
-{
- unsigned int freq;
-
- if (get_option(&str, &freq))
- sh_pclk_freq = freq;
-
- return 1;
-}
-__setup("sh_pclk=", sh_pclk_setup);
-
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
-
-void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc)
-{
- unsigned int frqcr = ctrl_inw(FRQCR);
-
-#if defined(CONFIG_CPU_SH3)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
- *ifc = md_table[((frqcr & 0x0070) >> 4)];
- *bfc = md_table[((frqcr & 0x0700) >> 8)];
- *pfc = md_table[frqcr & 0x0007];
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- *bfc = stc_multipliers[(frqcr & 0x0300) >> 8];
- *ifc = ifc_divisors[(frqcr & 0x0030) >> 4];
- *pfc = pfc_divisors[frqcr & 0x0003];
-#else
- unsigned int tmp;
-
- tmp = (frqcr & 0x8000) >> 13;
- tmp |= (frqcr & 0x0030) >> 4;
- *bfc = stc_multipliers[tmp];
- tmp = (frqcr & 0x4000) >> 12;
- tmp |= (frqcr & 0x000c) >> 2;
- *ifc = ifc_divisors[tmp];
- tmp = (frqcr & 0x2000) >> 11;
- tmp |= frqcr & 0x0003;
- *pfc = pfc_divisors[tmp];
-#endif
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
- *ifc = ifc_divisors[(frqcr>> 20) & 0x0007];
- *bfc = bfc_divisors[(frqcr>> 12) & 0x0007];
- *pfc = pfc_divisors[frqcr & 0x0007];
-#else
- *ifc = ifc_divisors[(frqcr >> 6) & 0x0007];
- *bfc = bfc_divisors[(frqcr >> 3) & 0x0007];
- *pfc = pfc_divisors[frqcr & 0x0007];
-#endif
-#endif
-}
-
-/*
- * This bit of ugliness builds up accessor routines to get at both
- * the divisors and the physical values.
- */
-#define _FREQ_TABLE(x) \
- unsigned int get_##x##_divisor(unsigned int value) \
- { return x##_divisors[value]; } \
- \
- unsigned int get_##x##_value(unsigned int divisor) \
- { return x##_values[(divisor - 1)]; }
-
-_FREQ_TABLE(ifc);
-_FREQ_TABLE(bfc);
-_FREQ_TABLE(pfc);
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-
-/*
- * The ST40 divisors are totally different so we set the cpu data
- * clocks using a different algorithm
- *
- * I've just plugged this from the 2.4 code
- * - Alex Bennee <kernel-hacker@bennee.com>
- */
-#define CCN_PVR_CHIP_SHIFT 24
-#define CCN_PVR_CHIP_MASK 0xff
-#define CCN_PVR_CHIP_ST40STB1 0x4
-
-
-struct frqcr_data {
- unsigned short frqcr;
-
- struct {
- unsigned char multiplier;
- unsigned char divisor;
- } factor[3];
-};
-
-static struct frqcr_data st40_frqcr_table[] = {
- { 0x000, {{1,1}, {1,1}, {1,2}}},
- { 0x002, {{1,1}, {1,1}, {1,4}}},
- { 0x004, {{1,1}, {1,1}, {1,8}}},
- { 0x008, {{1,1}, {1,2}, {1,2}}},
- { 0x00A, {{1,1}, {1,2}, {1,4}}},
- { 0x00C, {{1,1}, {1,2}, {1,8}}},
- { 0x011, {{1,1}, {2,3}, {1,6}}},
- { 0x013, {{1,1}, {2,3}, {1,3}}},
- { 0x01A, {{1,1}, {1,2}, {1,4}}},
- { 0x01C, {{1,1}, {1,2}, {1,8}}},
- { 0x023, {{1,1}, {2,3}, {1,3}}},
- { 0x02C, {{1,1}, {1,2}, {1,8}}},
- { 0x048, {{1,2}, {1,2}, {1,4}}},
- { 0x04A, {{1,2}, {1,2}, {1,6}}},
- { 0x04C, {{1,2}, {1,2}, {1,8}}},
- { 0x05A, {{1,2}, {1,3}, {1,6}}},
- { 0x05C, {{1,2}, {1,3}, {1,6}}},
- { 0x063, {{1,2}, {1,4}, {1,4}}},
- { 0x06C, {{1,2}, {1,4}, {1,8}}},
- { 0x091, {{1,3}, {1,3}, {1,6}}},
- { 0x093, {{1,3}, {1,3}, {1,6}}},
- { 0x0A3, {{1,3}, {1,6}, {1,6}}},
- { 0x0DA, {{1,4}, {1,4}, {1,8}}},
- { 0x0DC, {{1,4}, {1,4}, {1,8}}},
- { 0x0EC, {{1,4}, {1,8}, {1,8}}},
- { 0x123, {{1,4}, {1,4}, {1,8}}},
- { 0x16C, {{1,4}, {1,8}, {1,8}}},
+static struct sysdev_class timer_sysclass = {
+ set_kset_name("timer"),
};
-struct memclk_data {
- unsigned char multiplier;
- unsigned char divisor;
-};
-
-static struct memclk_data st40_memclk_table[8] = {
- {1,1}, // 000
- {1,2}, // 001
- {1,3}, // 010
- {2,3}, // 011
- {1,4}, // 100
- {1,6}, // 101
- {1,8}, // 110
- {1,8} // 111
-};
-
-static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr)
+static int __init timer_init_sysfs(void)
{
- unsigned int cpu_clock, master_clock, bus_clock, memory_clock;
- struct frqcr_data *d;
- int a;
- unsigned long memclkcr;
- struct memclk_data *e;
+ int ret = sysdev_class_register(&timer_sysclass);
+ if (ret != 0)
+ return ret;
- for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) {
- d = &st40_frqcr_table[a];
-
- if (d->frqcr == (frqcr & 0x1ff))
- break;
- }
+ sys_timer->dev.cls = &timer_sysclass;
+ return sysdev_register(&sys_timer->dev);
+}
- if (a == ARRAY_SIZE(st40_frqcr_table)) {
- d = st40_frqcr_table;
+device_initcall(timer_init_sysfs);
- printk("ERROR: Unrecognised FRQCR value (0x%x), "
- "using default multipliers\n", frqcr);
- }
-
- memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
- e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
-
- printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d "
- "Mem: %d/%d Periph: %d/%d\n",
- d->factor[0].multiplier, d->factor[0].divisor,
- d->factor[1].multiplier, d->factor[1].divisor,
- e->multiplier, e->divisor,
- d->factor[2].multiplier, d->factor[2].divisor);
-
- master_clock = module_clock * d->factor[2].divisor
- / d->factor[2].multiplier;
- bus_clock = master_clock * d->factor[1].multiplier
- / d->factor[1].divisor;
- memory_clock = master_clock * e->multiplier
- / e->divisor;
- cpu_clock = master_clock * d->factor[0].multiplier
- / d->factor[0].divisor;
-
- current_cpu_data.cpu_clock = cpu_clock;
- current_cpu_data.master_clock = master_clock;
- current_cpu_data.bus_clock = bus_clock;
- current_cpu_data.memory_clock = memory_clock;
- current_cpu_data.module_clock = module_clock;
-}
-#endif
+void (*board_time_init)(void);
void __init time_init(void)
{
- unsigned int timer_freq = 0;
- unsigned int ifc, pfc, bfc;
- unsigned long interval;
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- unsigned long pvr;
- unsigned short frqcr;
-#endif
-
if (board_time_init)
board_time_init();
- /*
- * If we don't have an RTC (such as with the SH7300), don't attempt to
- * probe the timer frequency. Rely on an either hardcoded peripheral
- * clock value, or on the sh_pclk command line option. Note that we
- * still need to have CONFIG_SH_PCLK_FREQ set in order for things like
- * CLOCK_TICK_RATE to be sane.
- */
- current_cpu_data.module_clock = sh_pclk_freq;
-
-#ifdef CONFIG_SH_PCLK_CALC
- /* XXX: Switch this over to a more generic test. */
- {
- unsigned int freq;
-
- /*
- * If we've specified a peripheral clock frequency, and we have
- * an RTC, compare it against the autodetected value. Complain
- * if there's a mismatch.
- */
- timer_freq = get_timer_frequency();
- freq = timer_freq * 4;
-
- if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) {
- printk(KERN_NOTICE "Calculated peripheral clock value "
- "%d differs from sh_pclk value %d, fixing..\n",
- freq, sh_pclk_freq);
- current_cpu_data.module_clock = freq;
- }
- }
-#endif
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- /* XXX: Update ST40 code to use board_time_init() */
- pvr = ctrl_inl(CCN_PVR);
- frqcr = ctrl_inw(FRQCR);
- printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr);
-
- if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1)
- st40_specific_time_init(current_cpu_data.module_clock, frqcr);
- else
-#endif
- get_current_frequency_divisors(&ifc, &bfc, &pfc);
+ clk_init();
if (rtc_get_time) {
rtc_get_time(&xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
- if (board_timer_setup) {
- board_timer_setup(&irq0);
- } else {
- setup_irq(TIMER_IRQ, &irq0);
- }
-
/*
- * for ST40 chips the current_cpu_data should already be set
- * so not having valid pfc/bfc/ifc shouldn't be a problem
+ * Find the timer to use as the system timer, it will be
+ * initialized for us.
*/
- if (!current_cpu_data.master_clock)
- current_cpu_data.master_clock = current_cpu_data.module_clock * pfc;
- if (!current_cpu_data.bus_clock)
- current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc;
- if (!current_cpu_data.cpu_clock)
- current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc;
-
- printk("CPU clock: %d.%02dMHz\n",
- (current_cpu_data.cpu_clock / 1000000),
- (current_cpu_data.cpu_clock % 1000000)/10000);
- printk("Bus clock: %d.%02dMHz\n",
- (current_cpu_data.bus_clock / 1000000),
- (current_cpu_data.bus_clock % 1000000)/10000);
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- printk("Memory clock: %d.%02dMHz\n",
- (current_cpu_data.memory_clock / 1000000),
- (current_cpu_data.memory_clock % 1000000)/10000);
-#endif
- printk("Module clock: %d.%02dMHz\n",
- (current_cpu_data.module_clock / 1000000),
- (current_cpu_data.module_clock % 1000000)/10000);
-
- interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ;
-
- printk("Interval = %ld\n", interval);
-
- /* Start TMU0 */
- ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
- ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
- ctrl_outl(interval, TMU0_TCOR);
- ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ sys_timer = get_sys_timer();
+ printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
#if defined(CONFIG_SH_KGDB)
/*
--- /dev/null
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+
+struct clk;
+
+struct clk_ops {
+ void (*init)(struct clk *clk);
+ void (*enable)(struct clk *clk);
+ void (*disable)(struct clk *clk);
+ void (*recalc)(struct clk *clk);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+ struct list_head node;
+ const char *name;
+
+ struct module *owner;
+
+ struct clk *parent;
+ struct clk_ops *ops;
+
+ struct kref kref;
+
+ unsigned long rate;
+ unsigned long flags;
+};
+
+#define CLK_ALWAYS_ENABLED (1 << 0)
+#define CLK_RATE_PROPAGATES (1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+int __clk_enable(struct clk *);
+int clk_enable(struct clk *);
+
+void __clk_disable(struct clk *);
+void clk_disable(struct clk *);
+
+int clk_set_rate(struct clk *, unsigned long rate);
+unsigned long clk_get_rate(struct clk *);
+void clk_recalc_rate(struct clk *);
+
+struct clk *clk_get(const char *id);
+void clk_put(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+int show_clocks(struct seq_file *m);
+
+#endif /* __ASM_SH_CLOCK_H */
+
#if defined(CONFIG_CPU_SUBTYPE_SH73180)
#define FRQCR 0xa4150000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define FRQCR 0xffc80000
#else
#define FRQCR 0xffc00000
#endif
#include <asm/cpu/freq.h>
-/* arch/sh/kernel/time.c */
-extern void get_current_frequency_divisors(unsigned int *ifc, unsigned int *pfc, unsigned int *bfc);
-
-extern unsigned int get_ifc_divisor(unsigned int value);
-extern unsigned int get_ifc_divisor(unsigned int value);
-extern unsigned int get_ifc_divisor(unsigned int value);
-
-extern unsigned int get_ifc_value(unsigned int divisor);
-extern unsigned int get_pfc_value(unsigned int divisor);
-extern unsigned int get_bfc_value(unsigned int divisor);
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_FREQ_H */
projects / linux-2.6-omap-h63xx.git / commitdiff