hwif->set_pio_mode = &cmd64x_set_pio_mode;
        hwif->set_dma_mode = &cmd64x_set_dma_mode;
 
-       if (dev->device == PCI_DEVICE_ID_CMD_646)
-               hwif->chipset = ide_cmd646;
-
        if (!hwif->dma_base)
                return;
 
                .init_chipset   = init_chipset_cmd64x,
                .init_hwif      = init_hwif_cmd64x,
                .enablebits     = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
+               .chipset        = ide_cmd646,
                .host_flags     = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE,
                .pio_mask       = ATA_PIO5,
                .mwdma_mask     = ATA_MWDMA2,
 
  */
 static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
 {
-       hwif->chipset = ide_cy82c693;
        hwif->set_pio_mode = &cy82c693_set_pio_mode;
 
        if (hwif->dma_base == 0)
        .init_chipset   = init_chipset_cy82c693,
        .init_iops      = init_iops_cy82c693,
        .init_hwif      = init_hwif_cy82c693,
+       .chipset        = ide_cy82c693,
        .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_TRUST_BIOS_FOR_DMA |
                          IDE_HFLAG_BOOTABLE,
        .pio_mask       = ATA_PIO4,
 
        u16 reg;
        struct pci_dev *dev = hwif->pci_dev;
 
-       hwif->chipset = ide_rz1000;
        if (!pci_read_config_word (dev, 0x40, ®) &&
            !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
                printk(KERN_INFO "%s: disabled chipset read-ahead "
 static ide_pci_device_t rz1000_chipset __devinitdata = {
        .name           = "RZ100x",
        .init_hwif      = init_hwif_rz1000,
+       .chipset        = ide_rz1000,
        .host_flags     = IDE_HFLAG_NO_DMA | IDE_HFLAG_BOOTABLE,
 };
 
 
        u8 reg = 0;
        struct pci_dev *dev = hwif->pci_dev;
 
-       hwif->chipset = ide_trm290;
        cfgbase = pci_resource_start(dev, 4);
        if ((dev->class & 5) && cfgbase) {
                hwif->config_data = cfgbase;
 static ide_pci_device_t trm290_chipset __devinitdata = {
        .name           = "TRM290",
        .init_hwif      = init_hwif_trm290,
+       .chipset        = ide_trm290,
        .host_flags     = IDE_HFLAG_NO_ATAPI_DMA |
 #if 0 /* play it safe for now */
                          IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 
                memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
                hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
        }
-       hwif->chipset = ide_pci;
+       hwif->chipset = d->chipset ? d->chipset : ide_pci;
        hwif->pci_dev = dev;
        hwif->cds = (struct ide_pci_device_s *) d;
        hwif->channel = port;
 
  * hwif_chipset_t is used to keep track of the specific hardware
  * chipset used by each IDE interface, if known.
  */
-typedef enum { ide_unknown,    ide_generic,    ide_pci,
+enum {         ide_unknown,    ide_generic,    ide_pci,
                ide_cmd640,     ide_dtc2278,    ide_ali14xx,
                ide_qd65xx,     ide_umc8672,    ide_ht6560b,
                ide_rz1000,     ide_trm290,
                ide_cmd646,     ide_cy82c693,   ide_4drives,
                ide_pmac,       ide_etrax100,   ide_acorn,
                ide_au1xxx, ide_forced
-} hwif_chipset_t;
+};
+
+typedef u8 hwif_chipset_t;
 
 /*
  * Structure to hold all information about the location of this port
        void                    (*init_dma)(ide_hwif_t *, unsigned long);
        void                    (*fixup)(ide_hwif_t *);
        ide_pci_enablebit_t     enablebits[2];
+       hwif_chipset_t          chipset;
        unsigned int            extra;
        u32                     host_flags;
        u8                      pio_mask;