int  flexcop_device_initialize(struct flexcop_device*);
 void flexcop_device_exit(struct flexcop_device *fc);
 
+void flexcop_reset_block_300(struct flexcop_device *fc);
+
 /* from flexcop-dma.c */
 int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size);
 void flexcop_dma_free(struct flexcop_dma *dma);
 int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
 int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
 int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index);
+int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
+int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
 int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
 int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
 
 /* from flexcop-misc.c */
 void flexcop_determine_revision(struct flexcop_device *fc);
 void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix);
+void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num);
 
 /* from flexcop-hw-filter.c */
 int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff);
 
 }
 EXPORT_SYMBOL(flexcop_dma_free);
 
-int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+int flexcop_dma_config(struct flexcop_device *fc,
+               struct flexcop_dma *dma,
+               flexcop_dma_index_t dma_idx)
 {
-       flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
+       flexcop_ibi_value v0x0,v0x4,v0xc;
+       v0x0.raw = v0x4.raw = v0xc.raw = 0;
 
-       if (no & FC_DMA_1)
-               v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
+       v0x0.dma_0x0.dma_address0        = dma->dma_addr0 >> 2;
+       v0xc.dma_0xc.dma_address1        = dma->dma_addr1 >> 2;
+       v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
 
-       if (no & FC_DMA_2)
-               v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
+       if ((dma_idx & FC_DMA_1) == dma_idx) {
+               fc->write_ibi_reg(fc,dma1_000,v0x0);
+               fc->write_ibi_reg(fc,dma1_004,v0x4);
+               fc->write_ibi_reg(fc,dma1_00c,v0xc);
+       } else if ((dma_idx & FC_DMA_2) == dma_idx) {
+               fc->write_ibi_reg(fc,dma2_010,v0x0);
+               fc->write_ibi_reg(fc,dma2_014,v0x4);
+               fc->write_ibi_reg(fc,dma2_01c,v0xc);
+       } else {
+               err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call.");
+               return -EINVAL;
+       }
 
-       fc->write_ibi_reg(fc,ctrl_208,v);
        return 0;
 }
-EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
+EXPORT_SYMBOL(flexcop_dma_config);
+
+/* start the DMA transfers, but not the DMA IRQs */
+int flexcop_dma_xfer_control(struct flexcop_device *fc,
+               flexcop_dma_index_t dma_idx,
+               flexcop_dma_addr_index_t index,
+               int onoff)
+{
+       flexcop_ibi_value v0x0,v0xc;
+       flexcop_ibi_register r0x0,r0xc;
+
+       if ((dma_idx & FC_DMA_1) == dma_idx) {
+               r0x0 = dma1_000;
+               r0xc = dma1_00c;
+       } else if ((dma_idx & FC_DMA_2) == dma_idx) {
+               r0x0 = dma2_010;
+               r0xc = dma2_01c;
+       } else {
+               err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call.");
+               return -EINVAL;
+       }
+
+       v0x0 = fc->read_ibi_reg(fc,r0x0);
+       v0xc = fc->read_ibi_reg(fc,r0xc);
+
+       deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
+       deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
+
+       if (index & FC_DMA_SUBADDR_0)
+               v0x0.dma_0x0.dma_0start = onoff;
+
+       if (index & FC_DMA_SUBADDR_1)
+               v0xc.dma_0xc.dma_1start = onoff;
+
+       fc->write_ibi_reg(fc,r0x0,v0x0);
+       fc->write_ibi_reg(fc,r0xc,v0xc);
+
+       deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw);
+       deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw);
+       return 0;
+}
+EXPORT_SYMBOL(flexcop_dma_xfer_control);
+
+static int flexcop_dma_remap(struct flexcop_device *fc,
+               flexcop_dma_index_t dma_idx,
+               int onoff)
+{
+       flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
+       flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+       deb_info("%s\n",__FUNCTION__);
+       v.dma_0xc.remap_enable = onoff;
+       fc->write_ibi_reg(fc,r,v);
+       return 0;
+}
 
-int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+int flexcop_dma_control_size_irq(struct flexcop_device *fc,
+               flexcop_dma_index_t no,
+               int onoff)
 {
        flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
 
 }
 EXPORT_SYMBOL(flexcop_dma_control_size_irq);
 
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff)
+int flexcop_dma_control_timer_irq(struct flexcop_device *fc,
+               flexcop_dma_index_t no,
+               int onoff)
 {
        flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
 
        if (no & FC_DMA_1)
-               v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
+               v.ctrl_208.DMA1_Timer_Enable_sig = onoff;
 
        if (no & FC_DMA_2)
-               v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
+               v.ctrl_208.DMA2_Timer_Enable_sig = onoff;
 
        fc->write_ibi_reg(fc,ctrl_208,v);
        return 0;
 }
-EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
+EXPORT_SYMBOL(flexcop_dma_control_timer_irq);
 
-int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index)
+/* 1 cycles = 1.97 msec */
+int flexcop_dma_config_timer(struct flexcop_device *fc,
+               flexcop_dma_index_t dma_idx,
+               u8 cycles)
 {
+       flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
+       flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
 
-       flexcop_ibi_value v0x0,v0x4,v0xc;
-       v0x0.raw = v0x4.raw = v0xc.raw = 0;
-
-       v0x0.dma_0x0.dma_address0        = dma->dma_addr0 >> 2;
-       v0xc.dma_0xc.dma_address1        = dma->dma_addr1 >> 2;
-       v0x4.dma_0x4_write.dma_addr_size = dma->size / 4;
-
-       if (index & FC_DMA_SUBADDR_0)
-               v0x0.dma_0x0.dma_0start = 1;
-
-       if (index & FC_DMA_SUBADDR_1)
-               v0xc.dma_0xc.dma_1start = 1;
-
-       if (dma_idx & FC_DMA_1) {
-               fc->write_ibi_reg(fc,dma1_000,v0x0);
-               fc->write_ibi_reg(fc,dma1_004,v0x4);
-               fc->write_ibi_reg(fc,dma1_00c,v0xc);
-       } else { /* (dma_idx & FC_DMA_2) */
-               fc->write_ibi_reg(fc,dma2_010,v0x0);
-               fc->write_ibi_reg(fc,dma2_014,v0x4);
-               fc->write_ibi_reg(fc,dma2_01c,v0xc);
-       }
-
-       return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config);
+       flexcop_dma_remap(fc,dma_idx,0);
 
-static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff)
-{
-       flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c;
-       flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-       v.dma_0xc.remap_enable = onoff;
+       deb_info("%s\n",__FUNCTION__);
+       v.dma_0x4_write.dmatimer = cycles;
        fc->write_ibi_reg(fc,r,v);
        return 0;
 }
+EXPORT_SYMBOL(flexcop_dma_config_timer);
 
-/* 1 cycles = 1.97 msec */
-int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles)
+/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */
+int flexcop_dma_control_packet_irq(struct flexcop_device *fc,
+               flexcop_dma_index_t no,
+               int onoff)
 {
-       flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
-       flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
+       flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
 
-       flexcop_dma_remap(fc,dma_idx,0);
+       deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
+       if (no & FC_DMA_1)
+               v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
+
+       if (no & FC_DMA_2)
+               v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
+
+       fc->write_ibi_reg(fc,ctrl_208,v);
+       deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
 
-       v.dma_0x4_write.dmatimer = cycles >> 1;
-       fc->write_ibi_reg(fc,r,v);
        return 0;
 }
-EXPORT_SYMBOL(flexcop_dma_config_timer);
+EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
 
-int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets)
+int flexcop_dma_config_packet_count(struct flexcop_device *fc,
+               flexcop_dma_index_t dma_idx,
+               u8 packets)
 {
        flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
        flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
 
 static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff)
 {
        flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff);
+
+       deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off");
 }
 
 void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff)
 {
        int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32;
 
-       fc->feedcount += onoff ? 1 : -1;
+       fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */
        if (dvbdmxfeed->index >= max_pid_filter)
                fc->extra_feedcount += onoff ? 1 : -1;
 
        /* if it was the first or last feed request change the stream-status */
        if (fc->feedcount == onoff) {
                flexcop_rcv_data_ctrl(fc,onoff);
-               if (fc->stream_control)
+               if (fc->stream_control) /* device specific stream control */
                        fc->stream_control(fc,onoff);
+
+               /* feeding stopped -> reset the flexcop filter*/
+               if (onoff == 0) {
+                       flexcop_reset_block_300(fc);
+                       flexcop_hw_filter_init(fc);
+               }
        }
 
        return 0;
 
                        flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type],
                        flexcop_revision_names[fc->rev],suffix);
 }
+
+void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num)
+{
+       flexcop_ibi_value v;
+       int i;
+       for (i = 0; i < num; i++) {
+               v = fc->read_ibi_reg(fc,reg+4*i);
+               deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw);
+       }
+       deb_rdump("\n");
+}
+EXPORT_SYMBOL(flexcop_dump_reg);
 
 module_param(enable_pid_filtering, int, 0444);
 MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
 
+static int irq_chk_intv;
+module_param(irq_chk_intv, int, 0644);
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+
 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
 #define dprintk(level,args...) \
        do { if ((debug & level)) printk(args); } while (0)
 #define deb_reg(args...)   dprintk(0x02,args)
 #define deb_ts(args...)    dprintk(0x04,args)
 #define deb_irq(args...)   dprintk(0x08,args)
+#define deb_chk(args...)   dprintk(0x10,args)
 
 static int debug = 0;
 module_param(debug, int, 0644);
 
        spinlock_t irq_lock;
 
+       unsigned long last_irq;
+
+       struct work_struct irq_check_work;
+
        struct flexcop_device *fc_dev;
 };
 
        return 0;
 }
 
+static void flexcop_pci_irq_check_work(void *data)
+{
+       struct flexcop_pci *fc_pci = data;
+       struct flexcop_device *fc = fc_pci->fc_dev;
+
+       flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+
+       flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
+
+       if (v.sram_dest_reg_714.net_ovflow_error)
+               deb_chk("sram net_ovflow_error\n");
+       if (v.sram_dest_reg_714.media_ovflow_error)
+               deb_chk("sram media_ovflow_error\n");
+       if (v.sram_dest_reg_714.cai_ovflow_error)
+               deb_chk("sram cai_ovflow_error\n");
+       if (v.sram_dest_reg_714.cai_ovflow_error)
+               deb_chk("sram cai_ovflow_error\n");
+
+       schedule_delayed_work(&fc_pci->irq_check_work,
+                       msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+}
+
 /* When PID filtering is turned on, we use the timer IRQ, because small amounts
  * of data need to be passed to the user space instantly as well. When PID
  * filtering is turned off, we use the page-change-IRQ */
-static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t flexcop_pci_isr(int irq, void *dev_id, struct pt_regs *regs)
 {
        struct flexcop_pci *fc_pci = dev_id;
        struct flexcop_device *fc = fc_pci->fc_dev;
-       flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c);
+       flexcop_ibi_value v;
        irqreturn_t ret = IRQ_HANDLED;
 
        spin_lock_irq(&fc_pci->irq_lock);
 
+       v = fc->read_ibi_reg(fc,irq_20c);
+
+   /* errors */
+       if (v.irq_20c.Data_receiver_error)
+               deb_chk("data receiver error\n");
+       if (v.irq_20c.Continuity_error_flag)
+               deb_chk("Contunuity error flag is set\n");
+       if (v.irq_20c.LLC_SNAP_FLAG_set)
+               deb_chk("LLC_SNAP_FLAG_set is set\n");
+       if (v.irq_20c.Transport_Error)
+               deb_chk("Transport error\n");
+
+       if ((fc_pci->count % 1000) == 0)
+               deb_chk("%d valid irq took place so far\n",fc_pci->count);
+
        if (v.irq_20c.DMA1_IRQ_Status == 1) {
                if (fc_pci->active_dma1_addr == 0)
                        flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
                        fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
                u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
 
-               deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
-                               v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+               deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
+                               jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+               fc_pci->last_irq = jiffies;
 
                /* buffer end was reached, restarted from the beginning
                 * pass the data from last_cur_pos to the buffer end to the demux
                                        fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
                                        (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
                        fc_pci->last_dma1_cur_pos = 0;
-                       fc_pci->count = 0;
                }
 
                if (cur_pos > fc_pci->last_dma1_cur_pos) {
                deb_irq("\n");
 
                fc_pci->last_dma1_cur_pos = cur_pos;
-       } else
+               fc_pci->count++;
+       } else {
+               deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw);
                ret = IRQ_NONE;
+       }
 
        spin_unlock_irq(&fc_pci->irq_lock);
 
-/* packet count would be ideal for hw filtering, but it isn't working. Either
- * the data book is wrong, or I'm unable to read it correctly */
-
-/*     if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */
-
        return ret;
 }
 
 {
        struct flexcop_pci *fc_pci = fc->bus_specific;
        if (onoff) {
-               flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
-               flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1);
-               flexcop_dma_config_timer(fc,FC_DMA_1,1);
+               flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1);
+               flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2);
 
-               if (fc_pci->fc_dev->pid_filtering) {
-                       fc_pci->last_dma1_cur_pos = 0;
-                       flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
-               } else {
-                       fc_pci->active_dma1_addr = 0;
-                       flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
-               }
+               flexcop_dma_config_timer(fc,FC_DMA_1,0);
 
-/*             flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0);
-               flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */
+               flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1);
+               deb_irq("DMA xfer enabled\n");
 
-               deb_irq("irqs enabled\n");
+               fc_pci->last_dma1_cur_pos = 0;
+               flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+               deb_irq("IRQ enabled\n");
+
+//             fc_pci->active_dma1_addr = 0;
+//             flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
+
+               if (irq_chk_intv > 0)
+                       schedule_delayed_work(&fc_pci->irq_check_work,
+                                       msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
        } else {
-               if (fc_pci->fc_dev->pid_filtering)
-                       flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
-               else
-                       flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+               if (irq_chk_intv > 0)
+                       cancel_delayed_work(&fc_pci->irq_check_work);
+
+               flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+               deb_irq("IRQ disabled\n");
 
-//             flexcop_dma_control_packet_irq(fc,FC_DMA_1,0);
-               deb_irq("irqs disabled\n");
+//             flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
+
+               flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0);
+               deb_irq("DMA xfer disabled\n");
        }
 
        return 0;
        flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO   | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
 
        fc_pci->init_state |= FC_PCI_DMA_INIT;
+
        goto success;
 dma1_free:
        flexcop_dma_free(&fc_pci->dma[0]);
 
        pci_set_drvdata(fc_pci->pdev, fc_pci);
 
-       if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq,
+       if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
                                        SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0)
                goto err_pci_iounmap;
 
        if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
                goto err_fc_exit;
 
+       INIT_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work, fc_pci);
+
        goto success;
 err_fc_exit:
        flexcop_device_exit(fc);
 
 static struct pci_device_id flexcop_pci_tbl[] = {
        { PCI_DEVICE(0x13d0, 0x2103) },
-/*     { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */
+/*     { PCI_DEVICE(0x13d0, 0x2200) }, ? */
        { },
 };
 
 MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
 
 static struct pci_driver flexcop_pci_driver = {
-       .name = "Technisat/B2C2 FlexCop II/IIb/III PCI",
+       .name     = "Technisat/B2C2 FlexCop II/IIb PCI",
        .id_table = flexcop_pci_tbl,
-       .probe = flexcop_pci_probe,
-       .remove = flexcop_pci_remove,
+       .probe    = flexcop_pci_probe,
+       .remove   = flexcop_pci_remove,
 };
 
 static int __init flexcop_pci_module_init(void)
 
 
 int b2c2_flexcop_debug;
 module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS);
 #undef DEBSTATUS
 
 /* global zero for ibi values */
        fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
 
        v210.raw = 0;
-       v210.sw_reset_210.reset_blocks = 0xff;
+       v210.sw_reset_210.reset_block_000 = 1;
+       v210.sw_reset_210.reset_block_100 = 1;
+       v210.sw_reset_210.reset_block_200 = 1;
+       v210.sw_reset_210.reset_block_300 = 1;
+       v210.sw_reset_210.reset_block_400 = 1;
+       v210.sw_reset_210.reset_block_500 = 1;
+       v210.sw_reset_210.reset_block_600 = 1;
+       v210.sw_reset_210.reset_block_700 = 1;
        v210.sw_reset_210.Block_reset_enable = 0xb2;
+
+       v210.sw_reset_210.Special_controls = 0xc259;
+
        fc->write_ibi_reg(fc,sw_reset_210,v210);
+       msleep(1);
 
 /* reset the periphical devices */
 
        fc->write_ibi_reg(fc,misc_204,v204);
 }
 
+void flexcop_reset_block_300(struct flexcop_device *fc)
+{
+       flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208),
+                                         v210 = fc->read_ibi_reg(fc,sw_reset_210);
+
+       deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw);
+
+       fc->write_ibi_reg(fc,ctrl_208,ibi_zero);
+
+       v210.sw_reset_210.reset_block_300 = 1;
+       v210.sw_reset_210.Block_reset_enable = 0xb2;
+
+       fc->write_ibi_reg(fc,sw_reset_210,v210);
+       msleep(1);
+
+       fc->write_ibi_reg(fc,ctrl_208,v208_save);
+}
+EXPORT_SYMBOL(flexcop_reset_block_300);
+
 struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len)
 {
        void *bus;
 
 #define deb_i2c(args...)   dprintk(0x04,args)
 #define deb_ts(args...)    dprintk(0x08,args)
 #define deb_sram(args...)  dprintk(0x10,args)
+#define deb_rdump(args...)  dprintk(0x20,args)
 
 #endif
 
        struct {
                u32 Special_controls               :16;
                u32 Block_reset_enable             : 8;
-               u32 reset_blocks                   : 8;
+               u32 reset_block_700                : 1;
+               u32 reset_block_600                : 1;
+               u32 reset_block_500                : 1;
+               u32 reset_block_400                : 1;
+               u32 reset_block_300                : 1;
+               u32 reset_block_200                : 1;
+               u32 reset_block_100                : 1;
+               u32 reset_block_000                : 1;
        } sw_reset_210;
 
        struct {
 
        } irq_20c;
 
        struct {
-               u32 reset_blocks                   : 8;
+               u32 reset_block_000                : 1;
+               u32 reset_block_100                : 1;
+               u32 reset_block_200                : 1;
+               u32 reset_block_300                : 1;
+               u32 reset_block_400                : 1;
+               u32 reset_block_500                : 1;
+               u32 reset_block_600                : 1;
+               u32 reset_block_700                : 1;
                u32 Block_reset_enable             : 8;
                u32 Special_controls               :16;
        } sw_reset_210;