config DRM_MGA
tristate "Matrox g200/g400"
- depends on DRM && AGP
+ depends on DRM
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Rickard E. (Rik) Faith <faith@valinux.com>
- * Jeff Hartmann <jhartmann@valinux.com>
- * Keith Whitwell <keith@tungstengraphics.com>
- *
- * Rewritten by:
- * Gareth Hughes <gareth@valinux.com>
+ */
+
+/**
+ * \file mga_dma.c
+ * DMA support for MGA G200 / G400.
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Jeff Hartmann <jhartmann@valinux.com>
+ * \author Keith Whitwell <keith@tungstengraphics.com>
+ * \author Gareth Hughes <gareth@valinux.com>
*/
#include "drmP.h"
#include "drm.h"
+#include "drm_sarea.h"
#include "mga_drm.h"
#include "mga_drv.h"
DRM_DEBUG( " space = 0x%06x\n", primary->space );
mga_flush_write_combine();
- MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER );
+ MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
DRM_DEBUG( "done.\n" );
}
DRM_DEBUG( " space = 0x%06x\n", primary->space );
mga_flush_write_combine();
- MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER );
+ MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
set_bit( 0, &primary->wrapped );
DRM_DEBUG( "done.\n" );
* DMA initialization, cleanup
*/
+
+int mga_driver_preinit(drm_device_t *dev, unsigned long flags)
+{
+ drm_mga_private_t * dev_priv;
+
+ dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+ if (!dev_priv)
+ return DRM_ERR(ENOMEM);
+
+ dev->dev_private = (void *)dev_priv;
+ memset(dev_priv, 0, sizeof(drm_mga_private_t));
+
+ dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
+ dev_priv->chipset = flags;
+
+ return 0;
+}
+
+/**
+ * Bootstrap the driver for AGP DMA.
+ *
+ * \todo
+ * Investigate whether there is any benifit to storing the WARP microcode in
+ * AGP memory. If not, the microcode may as well always be put in PCI
+ * memory.
+ *
+ * \todo
+ * This routine needs to set dma_bs->agp_mode to the mode actually configured
+ * in the hardware. Looking just at the Linux AGP driver code, I don't see
+ * an easy way to determine this.
+ *
+ * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
+ */
+static int mga_do_agp_dma_bootstrap(drm_device_t * dev,
+ drm_mga_dma_bootstrap_t * dma_bs)
+{
+ drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
+ const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+ int err;
+ unsigned offset;
+ const unsigned secondary_size = dma_bs->secondary_bin_count
+ * dma_bs->secondary_bin_size;
+ const unsigned agp_size = (dma_bs->agp_size << 20);
+ drm_buf_desc_t req;
+ drm_agp_mode_t mode;
+ drm_agp_info_t info;
+
+
+ /* Acquire AGP. */
+ err = drm_agp_acquire(dev);
+ if (err) {
+ DRM_ERROR("Unable to acquire AGP\n");
+ return err;
+ }
+
+ err = drm_agp_info(dev, &info);
+ if (err) {
+ DRM_ERROR("Unable to get AGP info\n");
+ return err;
+ }
+
+ mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode;
+ err = drm_agp_enable(dev, mode);
+ if (err) {
+ DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
+ return err;
+ }
+
+
+ /* In addition to the usual AGP mode configuration, the G200 AGP cards
+ * need to have the AGP mode "manually" set.
+ */
+
+ if (dev_priv->chipset == MGA_CARD_TYPE_G200) {
+ if (mode.mode & 0x02) {
+ MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE);
+ }
+ else {
+ MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE);
+ }
+ }
+
+
+ /* Allocate and bind AGP memory. */
+ dev_priv->agp_pages = agp_size / PAGE_SIZE;
+ dev_priv->agp_mem = drm_alloc_agp( dev, dev_priv->agp_pages, 0 );
+ if (dev_priv->agp_mem == NULL) {
+ dev_priv->agp_pages = 0;
+ DRM_ERROR("Unable to allocate %uMB AGP memory\n",
+ dma_bs->agp_size);
+ return DRM_ERR(ENOMEM);
+ }
+
+ err = drm_bind_agp( dev_priv->agp_mem, 0 );
+ if (err) {
+ DRM_ERROR("Unable to bind AGP memory\n");
+ return err;
+ }
+
+ offset = 0;
+ err = drm_addmap( dev, offset, warp_size,
+ _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp );
+ if (err) {
+ DRM_ERROR("Unable to map WARP microcode\n");
+ return err;
+ }
+
+ offset += warp_size;
+ err = drm_addmap( dev, offset, dma_bs->primary_size,
+ _DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary );
+ if (err) {
+ DRM_ERROR("Unable to map primary DMA region\n");
+ return err;
+ }
+
+ offset += dma_bs->primary_size;
+ err = drm_addmap( dev, offset, secondary_size,
+ _DRM_AGP, 0, & dev->agp_buffer_map );
+ if (err) {
+ DRM_ERROR("Unable to map secondary DMA region\n");
+ return err;
+ }
+
+ (void) memset( &req, 0, sizeof(req) );
+ req.count = dma_bs->secondary_bin_count;
+ req.size = dma_bs->secondary_bin_size;
+ req.flags = _DRM_AGP_BUFFER;
+ req.agp_start = offset;
+
+ err = drm_addbufs_agp( dev, & req );
+ if (err) {
+ DRM_ERROR("Unable to add secondary DMA buffers\n");
+ return err;
+ }
+
+ offset += secondary_size;
+ err = drm_addmap( dev, offset, agp_size - offset,
+ _DRM_AGP, 0, & dev_priv->agp_textures );
+ if (err) {
+ DRM_ERROR("Unable to map AGP texture region\n");
+ return err;
+ }
+
+ drm_core_ioremap(dev_priv->warp, dev);
+ drm_core_ioremap(dev_priv->primary, dev);
+ drm_core_ioremap(dev->agp_buffer_map, dev);
+
+ if (!dev_priv->warp->handle ||
+ !dev_priv->primary->handle || !dev->agp_buffer_map->handle) {
+ DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
+ dev_priv->warp->handle, dev_priv->primary->handle,
+ dev->agp_buffer_map->handle);
+ return DRM_ERR(ENOMEM);
+ }
+
+ dev_priv->dma_access = MGA_PAGPXFER;
+ dev_priv->wagp_enable = MGA_WAGP_ENABLE;
+
+ DRM_INFO("Initialized card for AGP DMA.\n");
+ return 0;
+}
+
+/**
+ * Bootstrap the driver for PCI DMA.
+ *
+ * \todo
+ * The algorithm for decreasing the size of the primary DMA buffer could be
+ * better. The size should be rounded up to the nearest page size, then
+ * decrease the request size by a single page each pass through the loop.
+ *
+ * \todo
+ * Determine whether the maximum address passed to drm_pci_alloc is correct.
+ * The same goes for drm_addbufs_pci.
+ *
+ * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
+ */
+static int mga_do_pci_dma_bootstrap(drm_device_t * dev,
+ drm_mga_dma_bootstrap_t * dma_bs)
+{
+ drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
+ const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+ unsigned int primary_size;
+ unsigned int bin_count;
+ int err;
+ drm_buf_desc_t req;
+
+
+ if (dev->dma == NULL) {
+ DRM_ERROR("dev->dma is NULL\n");
+ return DRM_ERR(EFAULT);
+ }
+
+ /* The proper alignment is 0x100 for this mapping */
+ err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT,
+ _DRM_READ_ONLY, &dev_priv->warp);
+ if (err != 0) {
+ DRM_ERROR("Unable to create mapping for WARP microcode\n");
+ return err;
+ }
+
+ /* Other than the bottom two bits being used to encode other
+ * information, there don't appear to be any restrictions on the
+ * alignment of the primary or secondary DMA buffers.
+ */
+
+ for ( primary_size = dma_bs->primary_size
+ ; primary_size != 0
+ ; primary_size >>= 1 ) {
+ /* The proper alignment for this mapping is 0x04 */
+ err = drm_addmap(dev, 0, primary_size, _DRM_CONSISTENT,
+ _DRM_READ_ONLY, &dev_priv->primary);
+ if (!err)
+ break;
+ }
+
+ if (err != 0) {
+ DRM_ERROR("Unable to allocate primary DMA region\n");
+ return DRM_ERR(ENOMEM);
+ }
+
+ if (dev_priv->primary->size != dma_bs->primary_size) {
+ DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
+ dma_bs->primary_size,
+ (unsigned) dev_priv->primary->size);
+ dma_bs->primary_size = dev_priv->primary->size;
+ }
+
+ for ( bin_count = dma_bs->secondary_bin_count
+ ; bin_count > 0
+ ; bin_count-- ) {
+ (void) memset( &req, 0, sizeof(req) );
+ req.count = bin_count;
+ req.size = dma_bs->secondary_bin_size;
+
+ err = drm_addbufs_pci( dev, & req );
+ if (!err) {
+ break;
+ }
+ }
+
+ if (bin_count == 0) {
+ DRM_ERROR("Unable to add secondary DMA buffers\n");
+ return err;
+ }
+
+ if (bin_count != dma_bs->secondary_bin_count) {
+ DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
+ "to %u.\n", dma_bs->secondary_bin_count, bin_count);
+
+ dma_bs->secondary_bin_count = bin_count;
+ }
+
+ dev_priv->dma_access = 0;
+ dev_priv->wagp_enable = 0;
+
+ dma_bs->agp_mode = 0;
+
+ DRM_INFO("Initialized card for PCI DMA.\n");
+ return 0;
+}
+
+
+static int mga_do_dma_bootstrap(drm_device_t * dev,
+ drm_mga_dma_bootstrap_t * dma_bs)
+{
+ const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev);
+ int err;
+ drm_mga_private_t * const dev_priv =
+ (drm_mga_private_t *) dev->dev_private;
+
+
+ dev_priv->used_new_dma_init = 1;
+
+ /* The first steps are the same for both PCI and AGP based DMA. Map
+ * the cards MMIO registers and map a status page.
+ */
+ err = drm_addmap( dev, dev_priv->mmio_base, dev_priv->mmio_size,
+ _DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio );
+ if (err) {
+ DRM_ERROR("Unable to map MMIO region\n");
+ return err;
+ }
+
+
+ err = drm_addmap( dev, 0, SAREA_MAX, _DRM_SHM,
+ _DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL,
+ & dev_priv->status );
+ if (err) {
+ DRM_ERROR("Unable to map status region\n");
+ return err;
+ }
+
+
+ /* The DMA initialization procedure is slightly different for PCI and
+ * AGP cards. AGP cards just allocate a large block of AGP memory and
+ * carve off portions of it for internal uses. The remaining memory
+ * is returned to user-mode to be used for AGP textures.
+ */
+
+ if (is_agp) {
+ err = mga_do_agp_dma_bootstrap(dev, dma_bs);
+ }
+
+ /* If we attempted to initialize the card for AGP DMA but failed,
+ * clean-up any mess that may have been created.
+ */
+
+ if (err) {
+ mga_do_cleanup_dma(dev);
+ }
+
+
+ /* Not only do we want to try and initialized PCI cards for PCI DMA,
+ * but we also try to initialized AGP cards that could not be
+ * initialized for AGP DMA. This covers the case where we have an AGP
+ * card in a system with an unsupported AGP chipset. In that case the
+ * card will be detected as AGP, but we won't be able to allocate any
+ * AGP memory, etc.
+ */
+
+ if (!is_agp || err) {
+ err = mga_do_pci_dma_bootstrap(dev, dma_bs);
+ }
+
+
+ return err;
+}
+
+int mga_dma_bootstrap(DRM_IOCTL_ARGS)
+{
+ DRM_DEVICE;
+ drm_mga_dma_bootstrap_t bootstrap;
+ int err;
+
+
+ DRM_COPY_FROM_USER_IOCTL(bootstrap,
+ (drm_mga_dma_bootstrap_t __user *) data,
+ sizeof(bootstrap));
+
+ err = mga_do_dma_bootstrap(dev, & bootstrap);
+ if (! err) {
+ static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
+ const drm_mga_private_t * const dev_priv =
+ (drm_mga_private_t *) dev->dev_private;
+
+ if (dev_priv->agp_textures != NULL) {
+ bootstrap.texture_handle = dev_priv->agp_textures->offset;
+ bootstrap.texture_size = dev_priv->agp_textures->size;
+ }
+ else {
+ bootstrap.texture_handle = 0;
+ bootstrap.texture_size = 0;
+ }
+
+ bootstrap.agp_mode = modes[ bootstrap.agp_mode & 0x07 ];
+ if (DRM_COPY_TO_USER( (void __user *) data, & bootstrap,
+ sizeof(bootstrap))) {
+ err = DRM_ERR(EFAULT);
+ }
+ }
+ else {
+ mga_do_cleanup_dma(dev);
+ }
+
+ return err;
+}
+
static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init )
{
drm_mga_private_t *dev_priv;
int ret;
DRM_DEBUG( "\n" );
- dev_priv = drm_alloc( sizeof(drm_mga_private_t), DRM_MEM_DRIVER );
- if ( !dev_priv )
- return DRM_ERR(ENOMEM);
-
- memset( dev_priv, 0, sizeof(drm_mga_private_t) );
- dev_priv->chipset = init->chipset;
+ dev_priv = dev->dev_private;
- dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
-
- if ( init->sgram ) {
+ if (init->sgram) {
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK;
} else {
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR;
DRM_GETSAREA();
- if(!dev_priv->sarea) {
- DRM_ERROR( "failed to find sarea!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
+ if (!dev_priv->sarea) {
+ DRM_ERROR("failed to find sarea!\n");
return DRM_ERR(EINVAL);
}
- dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
- if(!dev_priv->mmio) {
- DRM_ERROR( "failed to find mmio region!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
- return DRM_ERR(EINVAL);
- }
- dev_priv->status = drm_core_findmap(dev, init->status_offset);
- if(!dev_priv->status) {
- DRM_ERROR( "failed to find status page!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
- return DRM_ERR(EINVAL);
- }
- dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
- if(!dev_priv->warp) {
- DRM_ERROR( "failed to find warp microcode region!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
- return DRM_ERR(EINVAL);
- }
- dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
- if(!dev_priv->primary) {
- DRM_ERROR( "failed to find primary dma region!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
- return DRM_ERR(EINVAL);
- }
- dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
- if(!dev->agp_buffer_map) {
- DRM_ERROR( "failed to find dma buffer region!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
- return DRM_ERR(EINVAL);
+ if (! dev_priv->used_new_dma_init) {
+ dev_priv->status = drm_core_findmap(dev, init->status_offset);
+ if (!dev_priv->status) {
+ DRM_ERROR("failed to find status page!\n");
+ return DRM_ERR(EINVAL);
+ }
+ dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
+ if (!dev_priv->mmio) {
+ DRM_ERROR("failed to find mmio region!\n");
+ return DRM_ERR(EINVAL);
+ }
+ dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
+ if (!dev_priv->warp) {
+ DRM_ERROR("failed to find warp microcode region!\n");
+ return DRM_ERR(EINVAL);
+ }
+ dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
+ if (!dev_priv->primary) {
+ DRM_ERROR("failed to find primary dma region!\n");
+ return DRM_ERR(EINVAL);
+ }
+ dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
+ if (!dev->agp_buffer_map) {
+ DRM_ERROR("failed to find dma buffer region!\n");
+ return DRM_ERR(EINVAL);
+ }
+
+ drm_core_ioremap(dev_priv->warp, dev);
+ drm_core_ioremap(dev_priv->primary, dev);
+ drm_core_ioremap(dev->agp_buffer_map, dev);
}
dev_priv->sarea_priv =
(drm_mga_sarea_t *)((u8 *)dev_priv->sarea->handle +
init->sarea_priv_offset);
- drm_core_ioremap( dev_priv->warp, dev );
- drm_core_ioremap( dev_priv->primary, dev );
- drm_core_ioremap( dev->agp_buffer_map, dev );
-
- if(!dev_priv->warp->handle ||
- !dev_priv->primary->handle ||
- !dev->agp_buffer_map->handle ) {
- DRM_ERROR( "failed to ioremap agp regions!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
+ if (!dev_priv->warp->handle ||
+ !dev_priv->primary->handle ||
+ ((dev_priv->dma_access != 0) &&
+ ((dev->agp_buffer_map == NULL) ||
+ (dev->agp_buffer_map->handle == NULL)))) {
+ DRM_ERROR("failed to ioremap agp regions!\n");
return DRM_ERR(ENOMEM);
}
- ret = mga_warp_install_microcode( dev_priv );
- if ( ret < 0 ) {
- DRM_ERROR( "failed to install WARP ucode!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
+ ret = mga_warp_install_microcode(dev_priv);
+ if (ret < 0) {
+ DRM_ERROR("failed to install WARP ucode!\n");
return ret;
}
- ret = mga_warp_init( dev_priv );
- if ( ret < 0 ) {
- DRM_ERROR( "failed to init WARP engine!\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
+ ret = mga_warp_init(dev_priv);
+ if (ret < 0) {
+ DRM_ERROR("failed to init WARP engine!\n");
return ret;
}
dev_priv->sarea_priv->last_frame.head = 0;
dev_priv->sarea_priv->last_frame.wrap = 0;
- if ( mga_freelist_init( dev, dev_priv ) < 0 ) {
- DRM_ERROR( "could not initialize freelist\n" );
- /* Assign dev_private so we can do cleanup. */
- dev->dev_private = (void *)dev_priv;
- mga_do_cleanup_dma( dev );
+ if (mga_freelist_init(dev, dev_priv) < 0) {
+ DRM_ERROR("could not initialize freelist\n");
return DRM_ERR(ENOMEM);
}
- /* Make dev_private visable to others. */
- dev->dev_private = (void *)dev_priv;
return 0;
}
static int mga_do_cleanup_dma( drm_device_t *dev )
{
- DRM_DEBUG( "\n" );
+ int err = 0;
+ DRM_DEBUG("\n");
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
if ( dev->dev_private ) {
drm_mga_private_t *dev_priv = dev->dev_private;
- if ( dev_priv->warp != NULL )
- drm_core_ioremapfree( dev_priv->warp, dev );
- if ( dev_priv->primary != NULL )
- drm_core_ioremapfree( dev_priv->primary, dev );
- if ( dev->agp_buffer_map != NULL )
- drm_core_ioremapfree( dev->agp_buffer_map, dev );
+ if ((dev_priv->warp != NULL)
+ && (dev_priv->mmio->type != _DRM_CONSISTENT))
+ drm_core_ioremapfree(dev_priv->warp, dev);
+
+ if ((dev_priv->primary != NULL)
+ && (dev_priv->primary->type != _DRM_CONSISTENT))
+ drm_core_ioremapfree(dev_priv->primary, dev);
- if ( dev_priv->head != NULL ) {
- mga_freelist_cleanup( dev );
+ if (dev->agp_buffer_map != NULL)
+ drm_core_ioremapfree(dev->agp_buffer_map, dev);
+
+ if (dev_priv->used_new_dma_init) {
+ if (dev_priv->agp_mem != NULL) {
+ dev_priv->agp_textures = NULL;
+ drm_unbind_agp(dev_priv->agp_mem);
+
+ drm_free_agp(dev_priv->agp_mem, dev_priv->agp_pages);
+ dev_priv->agp_pages = 0;
+ dev_priv->agp_mem = NULL;
+ }
+
+ if ((dev->agp != NULL) && dev->agp->acquired) {
+ err = drm_agp_release(dev);
+ }
+
+ dev_priv->used_new_dma_init = 0;
}
- drm_free( dev->dev_private, sizeof(drm_mga_private_t),
- DRM_MEM_DRIVER );
- dev->dev_private = NULL;
+ dev_priv->warp = NULL;
+ dev_priv->primary = NULL;
+ dev_priv->mmio = NULL;
+ dev_priv->status = NULL;
+ dev_priv->sarea = NULL;
+ dev_priv->sarea_priv = NULL;
+ dev->agp_buffer_map = NULL;
+
+ memset(&dev_priv->prim, 0, sizeof(dev_priv->prim));
+ dev_priv->warp_pipe = 0;
+ memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys));
+
+ if (dev_priv->head != NULL) {
+ mga_freelist_cleanup(dev);
+ }
}
return 0;
{
DRM_DEVICE;
drm_mga_init_t init;
+ int err;
LOCK_TEST_WITH_RETURN( dev, filp );
- DRM_COPY_FROM_USER_IOCTL( init, (drm_mga_init_t __user *)data, sizeof(init) );
+ DRM_COPY_FROM_USER_IOCTL(init, (drm_mga_init_t __user *) data,
+ sizeof(init));
switch ( init.func ) {
case MGA_INIT_DMA:
- return mga_do_init_dma( dev, &init );
+ err = mga_do_init_dma(dev, &init);
+ if (err) {
+ (void) mga_do_cleanup_dma(dev);
+ }
+ return err;
case MGA_CLEANUP_DMA:
return mga_do_cleanup_dma( dev );
}
return ret;
}
-void mga_driver_pretakedown(drm_device_t *dev)
+/**
+ * Called just before the module is unloaded.
+ */
+int mga_driver_postcleanup(drm_device_t * dev)
+{
+ drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+ dev->dev_private = NULL;
+
+ return 0;
+}
+
+/**
+ * Called when the last opener of the device is closed.
+ */
+void mga_driver_pretakedown(drm_device_t * dev)
{
mga_do_cleanup_dma( dev );
}
} drm_mga_sarea_t;
-/* WARNING: If you change any of these defines, make sure to change the
- * defines in the Xserver file (xf86drmMga.h)
- */
-
/* MGA specific ioctls
* The device specific ioctl range is 0x40 to 0x79.
*/
#define DRM_MGA_BLIT 0x08
#define DRM_MGA_GETPARAM 0x09
+/* 3.2:
+ * ioctls for operating on fences.
+ */
+#define DRM_MGA_SET_FENCE 0x0a
+#define DRM_MGA_WAIT_FENCE 0x0b
+#define DRM_MGA_DMA_BOOTSTRAP 0x0c
+
+
#define DRM_IOCTL_MGA_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t)
#define DRM_IOCTL_MGA_FLUSH DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, drm_lock_t)
#define DRM_IOCTL_MGA_RESET DRM_IO( DRM_COMMAND_BASE + DRM_MGA_RESET)
#define DRM_IOCTL_MGA_ILOAD DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t)
#define DRM_IOCTL_MGA_BLIT DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t)
#define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t)
+#define DRM_IOCTL_MGA_SET_FENCE DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_WAIT_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t)
typedef struct _drm_mga_warp_index {
int installed;
unsigned long buffers_offset;
} drm_mga_init_t;
-typedef struct drm_mga_fullscreen {
- enum {
- MGA_INIT_FULLSCREEN = 0x01,
- MGA_CLEANUP_FULLSCREEN = 0x02
- } func;
-} drm_mga_fullscreen_t;
+typedef struct drm_mga_dma_bootstrap {
+ /**
+ * \name AGP texture region
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will
+ * be filled in with the actual AGP texture settings.
+ *
+ * \warning
+ * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode
+ * is zero, it means that PCI memory (most likely through the use of
+ * an IOMMU) is being used for "AGP" textures.
+ */
+ /*@{*/
+ drm_handle_t texture_handle; /**< Handle used to map AGP textures. */
+ uint32_t texture_size; /**< Size of the AGP texture region. */
+ /*@}*/
+
+
+ /**
+ * Requested size of the primary DMA region.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual AGP mode. If AGP was not available
+ */
+ uint32_t primary_size;
+
+
+ /**
+ * Requested number of secondary DMA buffers.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual number of secondary DMA buffers
+ * allocated. Particularly when PCI DMA is used, this may be
+ * (subtantially) less than the number requested.
+ */
+ uint32_t secondary_bin_count;
+
+
+ /**
+ * Requested size of each secondary DMA buffer.
+ *
+ * While the kernel \b is free to reduce
+ * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed
+ * to reduce dma_mga_dma_bootstrap::secondary_bin_size.
+ */
+ uint32_t secondary_bin_size;
+
+
+ /**
+ * Bit-wise mask of AGPSTAT2_* values. Currently only \c AGPSTAT2_1X,
+ * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported. If this value is
+ * zero, it means that PCI DMA should be used, even if AGP is
+ * possible.
+ *
+ * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+ * filled in with the actual AGP mode. If AGP was not available
+ * (i.e., PCI DMA was used), this value will be zero.
+ */
+ uint32_t agp_mode;
+
+
+ /**
+ * Desired AGP GART size, measured in megabytes.
+ */
+ uint8_t agp_size;
+} drm_mga_dma_bootstrap_t;
typedef struct drm_mga_clear {
unsigned int flags;
*/
#define MGA_PARAM_IRQ_NR 1
+/* 3.2: Query the actual card type. The DDX only distinguishes between
+ * G200 chips and non-G200 chips, which it calls G400. It turns out that
+ * there are some very sublte differences between the G4x0 chips and the G550
+ * chips. Using this parameter query, a client-side driver can detect the
+ * difference between a G4x0 and a G550.
+ */
+#define MGA_PARAM_CARD_TYPE 2
+
typedef struct drm_mga_getparam {
int param;
void __user *value;
#define DRIVER_NAME "mga"
#define DRIVER_DESC "Matrox G200/G400"
-#define DRIVER_DATE "20051013"
+#define DRIVER_DATE "20050607"
#define DRIVER_MAJOR 3
-#define DRIVER_MINOR 1
-#define DRIVER_PATCHLEVEL 1
+#define DRIVER_MINOR 2
+#define DRIVER_PATCHLEVEL 0
typedef struct drm_mga_primary_buffer {
u8 *start;
int chipset;
int usec_timeout;
+ /**
+ * If set, the new DMA initialization sequence was used. This is
+ * primarilly used to select how the driver should uninitialized its
+ * internal DMA structures.
+ */
+ int used_new_dma_init;
+
+ /**
+ * If AGP memory is used for DMA buffers, this will be the value
+ * \c MGA_PAGPXFER. Otherwise, it will be zero (for a PCI transfer).
+ */
+ u32 dma_access;
+
+ /**
+ * If AGP memory is used for DMA buffers, this will be the value
+ * \c MGA_WAGP_ENABLE. Otherwise, it will be zero (for a PCI
+ * transfer).
+ */
+ u32 wagp_enable;
+
+ /**
+ * \name MMIO region parameters.
+ *
+ * \sa drm_mga_private_t::mmio
+ */
+ /*@{*/
+ u32 mmio_base; /**< Bus address of base of MMIO. */
+ u32 mmio_size; /**< Size of the MMIO region. */
+ /*@}*/
+
u32 clear_cmd;
u32 maccess;
+ wait_queue_head_t fence_queue;
+ atomic_t last_fence_retired;
+ u32 next_fence_to_post;
+
unsigned int fb_cpp;
unsigned int front_offset;
unsigned int front_pitch;
drm_local_map_t *status;
drm_local_map_t *warp;
drm_local_map_t *primary;
- drm_local_map_t *buffers;
drm_local_map_t *agp_textures;
+
+ DRM_AGP_MEM *agp_mem;
+ unsigned int agp_pages;
} drm_mga_private_t;
/* mga_dma.c */
-extern int mga_dma_init( DRM_IOCTL_ARGS );
-extern int mga_dma_flush( DRM_IOCTL_ARGS );
-extern int mga_dma_reset( DRM_IOCTL_ARGS );
-extern int mga_dma_buffers( DRM_IOCTL_ARGS );
-extern void mga_driver_pretakedown(drm_device_t *dev);
-extern int mga_driver_dma_quiescent(drm_device_t *dev);
-
-extern int mga_do_wait_for_idle( drm_mga_private_t *dev_priv );
-
-extern void mga_do_dma_flush( drm_mga_private_t *dev_priv );
-extern void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv );
-extern void mga_do_dma_wrap_end( drm_mga_private_t *dev_priv );
+extern int mga_driver_preinit(drm_device_t * dev, unsigned long flags);
+extern int mga_dma_bootstrap(DRM_IOCTL_ARGS);
+extern int mga_dma_init(DRM_IOCTL_ARGS);
+extern int mga_dma_flush(DRM_IOCTL_ARGS);
+extern int mga_dma_reset(DRM_IOCTL_ARGS);
+extern int mga_dma_buffers(DRM_IOCTL_ARGS);
+extern int mga_driver_postcleanup(drm_device_t * dev);
+extern void mga_driver_pretakedown(drm_device_t * dev);
+extern int mga_driver_dma_quiescent(drm_device_t * dev);
+
+extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv);
+
+extern void mga_do_dma_flush(drm_mga_private_t * dev_priv);
+extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv);
+extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv);
extern int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf );
/* mga_warp.c */
-extern int mga_warp_install_microcode( drm_mga_private_t *dev_priv );
-extern int mga_warp_init( drm_mga_private_t *dev_priv );
-
-extern int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence);
-extern irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS );
-extern void mga_driver_irq_preinstall( drm_device_t *dev );
-extern void mga_driver_irq_postinstall( drm_device_t *dev );
-extern void mga_driver_irq_uninstall( drm_device_t *dev );
+extern unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv);
+extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv);
+extern int mga_warp_init(drm_mga_private_t * dev_priv);
+
+ /* mga_irq.c */
+extern int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence);
+extern int mga_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence);
+extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS);
+extern void mga_driver_irq_preinstall(drm_device_t * dev);
+extern void mga_driver_irq_postinstall(drm_device_t * dev);
+extern void mga_driver_irq_uninstall(drm_device_t * dev);
extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
*/
#define MGA_EXEC 0x0100
+/* AGP PLL encoding (for G200 only).
+ */
+#define MGA_AGP_PLL 0x1e4c
+# define MGA_AGP2XPLL_DISABLE (0 << 0)
+# define MGA_AGP2XPLL_ENABLE (1 << 0)
+
/* Warp registers
*/
#define MGA_WR0 0x2d00
drm_mga_private_t *dev_priv =
(drm_mga_private_t *)dev->dev_private;
int status;
+ int handled = 0;
+
+ status = MGA_READ(MGA_STATUS);
- status = MGA_READ( MGA_STATUS );
-
/* VBLANK interrupt */
if ( status & MGA_VLINEPEN ) {
MGA_WRITE( MGA_ICLEAR, MGA_VLINEICLR );
atomic_inc(&dev->vbl_received);
DRM_WAKEUP(&dev->vbl_queue);
- drm_vbl_send_signals( dev );
+ drm_vbl_send_signals(dev);
+ handled = 1;
+ }
+
+ /* SOFTRAP interrupt */
+ if (status & MGA_SOFTRAPEN) {
+ const u32 prim_start = MGA_READ(MGA_PRIMADDRESS);
+ const u32 prim_end = MGA_READ(MGA_PRIMEND);
+
+
+ MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR);
+
+ /* In addition to clearing the interrupt-pending bit, we
+ * have to write to MGA_PRIMEND to re-start the DMA operation.
+ */
+ if ( (prim_start & ~0x03) != (prim_end & ~0x03) ) {
+ MGA_WRITE(MGA_PRIMEND, prim_end);
+ }
+
+ atomic_inc(&dev_priv->last_fence_retired);
+ DRM_WAKEUP(&dev_priv->fence_queue);
+ handled = 1;
+ }
+
+ if ( handled ) {
return IRQ_HANDLED;
}
return IRQ_NONE;
return ret;
}
-void mga_driver_irq_preinstall( drm_device_t *dev ) {
- drm_mga_private_t *dev_priv =
- (drm_mga_private_t *)dev->dev_private;
+int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence)
+{
+ drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
+ unsigned int cur_fence;
+ int ret = 0;
+
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using fences.
+ */
+ DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ,
+ (((cur_fence = atomic_read(&dev_priv->last_fence_retired))
+ - *sequence) <= (1 << 23)));
+
+ *sequence = cur_fence;
+
+ return ret;
+}
+
+void mga_driver_irq_preinstall(drm_device_t * dev)
+{
+ drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
/* Disable *all* interrupts */
MGA_WRITE( MGA_IEN, 0 );
MGA_WRITE( MGA_ICLEAR, ~0 );
}
-void mga_driver_irq_postinstall( drm_device_t *dev ) {
- drm_mga_private_t *dev_priv =
- (drm_mga_private_t *)dev->dev_private;
+void mga_driver_irq_postinstall(drm_device_t * dev)
+{
+ drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
+
+ DRM_INIT_WAITQUEUE( &dev_priv->fence_queue );
- /* Turn on VBL interrupt */
- MGA_WRITE( MGA_IEN, MGA_VLINEIEN );
+ /* Turn on vertical blank interrupt and soft trap interrupt. */
+ MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
}
void mga_driver_irq_uninstall( drm_device_t *dev ) {
return;
/* Disable *all* interrupts */
- MGA_WRITE( MGA_IEN, 0 );
+ MGA_WRITE(MGA_IEN, 0);
+
+ dev->irq_enabled = 0;
}
/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
*/
- if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {
- DMA_BLOCK( MGA_DWGCTL, ctx->dwgctl,
- MGA_LEN + MGA_EXEC, 0x80000000,
- MGA_DWGCTL, ctx->dwgctl,
- MGA_LEN + MGA_EXEC, 0x80000000 );
+ if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+ DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
+ MGA_LEN + MGA_EXEC, 0x80000000,
+ MGA_DWGCTL, ctx->dwgctl,
+ MGA_LEN + MGA_EXEC, 0x80000000);
}
- DMA_BLOCK( MGA_DMAPAD, 0x00000000,
- MGA_CXBNDRY, (box->x2 << 16) | box->x1,
- MGA_YTOP, box->y1 * pitch,
- MGA_YBOT, box->y2 * pitch );
+ DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+ MGA_CXBNDRY, ((box->x2 - 1) << 16) | box->x1,
+ MGA_YTOP, box->y1 * pitch,
+ MGA_YBOT, (box->y2 - 1) * pitch);
ADVANCE_DMA();
}
/* Padding required to to hardware bug.
*/
- DMA_BLOCK( MGA_DMAPAD, 0xffffffff,
- MGA_DMAPAD, 0xffffffff,
- MGA_DMAPAD, 0xffffffff,
- MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] |
- MGA_WMODE_START |
- MGA_WAGP_ENABLE) );
+ DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
+ MGA_DMAPAD, 0xffffffff,
+ MGA_DMAPAD, 0xffffffff,
+ MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] |
+ MGA_WMODE_START | dev_priv->wagp_enable));
ADVANCE_DMA();
}
MGA_WR60, MGA_G400_WR_MAGIC ); /* tex1 height */
/* Padding required to to hardware bug */
- DMA_BLOCK( MGA_DMAPAD, 0xffffffff,
- MGA_DMAPAD, 0xffffffff,
- MGA_DMAPAD, 0xffffffff,
- MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] |
- MGA_WMODE_START |
- MGA_WAGP_ENABLE) );
+ DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
+ MGA_DMAPAD, 0xffffffff,
+ MGA_DMAPAD, 0xffffffff,
+ MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] |
+ MGA_WMODE_START | dev_priv->wagp_enable));
ADVANCE_DMA();
}
if ( dirty & MGA_UPLOAD_TEX0 )
ret |= mga_verify_tex( dev_priv, 0 );
- if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {
- if ( dirty & MGA_UPLOAD_TEX1 )
- ret |= mga_verify_tex( dev_priv, 1 );
+ if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
+ if (dirty & MGA_UPLOAD_TEX1)
+ ret |= mga_verify_tex(dev_priv, 1);
if ( dirty & MGA_UPLOAD_PIPE )
ret |= ( sarea_priv->warp_pipe > MGA_MAX_G400_PIPES );
BEGIN_DMA( 1 );
- DMA_BLOCK( MGA_DMAPAD, 0x00000000,
- MGA_DMAPAD, 0x00000000,
- MGA_SECADDRESS, (address |
- MGA_DMA_VERTEX),
- MGA_SECEND, ((address + length) |
- MGA_PAGPXFER) );
+ DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+ MGA_DMAPAD, 0x00000000,
+ MGA_SECADDRESS, (address |
+ MGA_DMA_VERTEX),
+ MGA_SECEND, ((address + length) |
+ dev_priv->dma_access));
ADVANCE_DMA();
} while ( ++i < sarea_priv->nbox );
BEGIN_DMA( 1 );
- DMA_BLOCK( MGA_DMAPAD, 0x00000000,
- MGA_DMAPAD, 0x00000000,
- MGA_SETUPADDRESS, address + start,
- MGA_SETUPEND, ((address + end) |
- MGA_PAGPXFER) );
+ DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+ MGA_DMAPAD, 0x00000000,
+ MGA_SETUPADDRESS, address + start,
+ MGA_SETUPEND, ((address + end) |
+ dev_priv->dma_access));
ADVANCE_DMA();
} while ( ++i < sarea_priv->nbox );
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_buf_priv_t *buf_priv = buf->dev_private;
drm_mga_context_regs_t *ctx = &dev_priv->sarea_priv->context_state;
- u32 srcorg = buf->bus_address | MGA_SRCACC_AGP | MGA_SRCMAP_SYSMEM;
+ u32 srcorg = buf->bus_address | dev_priv->dma_access | MGA_SRCMAP_SYSMEM;
u32 y2;
DMA_LOCALS;
DRM_DEBUG( "buf=%d used=%d\n", buf->idx, buf->used );
case MGA_PARAM_IRQ_NR:
value = dev->irq;
break;
+ case MGA_PARAM_CARD_TYPE:
+ value = dev_priv->chipset;
+ break;
default:
return DRM_ERR(EINVAL);
}
return 0;
}
+static int mga_set_fence(DRM_IOCTL_ARGS)
+{
+ DRM_DEVICE;
+ drm_mga_private_t *dev_priv = dev->dev_private;
+ u32 temp;
+ DMA_LOCALS;
+
+ if (!dev_priv) {
+ DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ return DRM_ERR(EINVAL);
+ }
+
+ DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
+
+ /* I would normal do this assignment in the declaration of temp,
+ * but dev_priv may be NULL.
+ */
+
+ temp = dev_priv->next_fence_to_post;
+ dev_priv->next_fence_to_post++;
+
+ BEGIN_DMA(1);
+ DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+ MGA_DMAPAD, 0x00000000,
+ MGA_DMAPAD, 0x00000000,
+ MGA_SOFTRAP, 0x00000000);
+ ADVANCE_DMA();
+
+ if (DRM_COPY_TO_USER( (u32 __user *) data, & temp, sizeof(u32))) {
+ DRM_ERROR("copy_to_user\n");
+ return DRM_ERR(EFAULT);
+ }
+
+ return 0;
+}
+
+static int mga_wait_fence(DRM_IOCTL_ARGS)
+{
+ DRM_DEVICE;
+ drm_mga_private_t *dev_priv = dev->dev_private;
+ u32 fence;
+
+ if (!dev_priv) {
+ DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+ return DRM_ERR(EINVAL);
+ }
+
+ DRM_COPY_FROM_USER_IOCTL(fence, (u32 __user *) data, sizeof(u32));
+
+ DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
+
+ mga_driver_fence_wait(dev, & fence);
+
+ if (DRM_COPY_TO_USER( (u32 __user *) data, & fence, sizeof(u32))) {
+ DRM_ERROR("copy_to_user\n");
+ return DRM_ERR(EFAULT);
+ }
+
+ return 0;
+}
+
drm_ioctl_desc_t mga_ioctls[] = {
- [DRM_IOCTL_NR(DRM_MGA_INIT)] = { mga_dma_init, 1, 1 },
- [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = { mga_dma_flush, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_RESET)] = { mga_dma_reset, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_SWAP)] = { mga_dma_swap, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = { mga_dma_clear, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = { mga_dma_vertex, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_INDICES)] = { mga_dma_indices, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = { mga_dma_iload, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_BLIT)] = { mga_dma_blit, 1, 0 },
- [DRM_IOCTL_NR(DRM_MGA_GETPARAM)]= { mga_getparam, 1, 0 },
+ [DRM_IOCTL_NR(DRM_MGA_INIT)] = {mga_dma_init, 1, 1},
+ [DRM_IOCTL_NR(DRM_MGA_FLUSH)] = {mga_dma_flush, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_RESET)] = {mga_dma_reset, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_SWAP)] = {mga_dma_swap, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_CLEAR)] = {mga_dma_clear, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_VERTEX)] = {mga_dma_vertex, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_INDICES)] = {mga_dma_indices, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_ILOAD)] = {mga_dma_iload, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_BLIT)] = {mga_dma_blit, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_GETPARAM)] = {mga_getparam, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_SET_FENCE)] = {mga_set_fence, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_WAIT_FENCE)] = {mga_wait_fence, 1, 0},
+ [DRM_IOCTL_NR(DRM_MGA_DMA_BOOTSTRAP)] = {mga_dma_bootstrap, 1, 1},
+
};
int mga_max_ioctl = DRM_ARRAY_SIZE(mga_ioctls);
vcbase += WARP_UCODE_SIZE( which ); \
} while (0)
-
-static unsigned int mga_warp_g400_microcode_size( drm_mga_private_t *dev_priv )
-{
- unsigned int size;
-
- size = ( WARP_UCODE_SIZE( warp_g400_tgz ) +
- WARP_UCODE_SIZE( warp_g400_tgza ) +
- WARP_UCODE_SIZE( warp_g400_tgzaf ) +
- WARP_UCODE_SIZE( warp_g400_tgzf ) +
- WARP_UCODE_SIZE( warp_g400_tgzs ) +
- WARP_UCODE_SIZE( warp_g400_tgzsa ) +
- WARP_UCODE_SIZE( warp_g400_tgzsaf ) +
- WARP_UCODE_SIZE( warp_g400_tgzsf ) +
- WARP_UCODE_SIZE( warp_g400_t2gz ) +
- WARP_UCODE_SIZE( warp_g400_t2gza ) +
- WARP_UCODE_SIZE( warp_g400_t2gzaf ) +
- WARP_UCODE_SIZE( warp_g400_t2gzf ) +
- WARP_UCODE_SIZE( warp_g400_t2gzs ) +
- WARP_UCODE_SIZE( warp_g400_t2gzsa ) +
- WARP_UCODE_SIZE( warp_g400_t2gzsaf ) +
- WARP_UCODE_SIZE( warp_g400_t2gzsf ) );
-
- size = PAGE_ALIGN( size );
-
- DRM_DEBUG( "G400 ucode size = %d bytes\n", size );
- return size;
-}
-
-static unsigned int mga_warp_g200_microcode_size( drm_mga_private_t *dev_priv )
+static const unsigned int mga_warp_g400_microcode_size =
+ (WARP_UCODE_SIZE(warp_g400_tgz) +
+ WARP_UCODE_SIZE(warp_g400_tgza) +
+ WARP_UCODE_SIZE(warp_g400_tgzaf) +
+ WARP_UCODE_SIZE(warp_g400_tgzf) +
+ WARP_UCODE_SIZE(warp_g400_tgzs) +
+ WARP_UCODE_SIZE(warp_g400_tgzsa) +
+ WARP_UCODE_SIZE(warp_g400_tgzsaf) +
+ WARP_UCODE_SIZE(warp_g400_tgzsf) +
+ WARP_UCODE_SIZE(warp_g400_t2gz) +
+ WARP_UCODE_SIZE(warp_g400_t2gza) +
+ WARP_UCODE_SIZE(warp_g400_t2gzaf) +
+ WARP_UCODE_SIZE(warp_g400_t2gzf) +
+ WARP_UCODE_SIZE(warp_g400_t2gzs) +
+ WARP_UCODE_SIZE(warp_g400_t2gzsa) +
+ WARP_UCODE_SIZE(warp_g400_t2gzsaf) +
+ WARP_UCODE_SIZE(warp_g400_t2gzsf));
+
+static const unsigned int mga_warp_g200_microcode_size =
+ (WARP_UCODE_SIZE(warp_g200_tgz) +
+ WARP_UCODE_SIZE(warp_g200_tgza) +
+ WARP_UCODE_SIZE(warp_g200_tgzaf) +
+ WARP_UCODE_SIZE(warp_g200_tgzf) +
+ WARP_UCODE_SIZE(warp_g200_tgzs) +
+ WARP_UCODE_SIZE(warp_g200_tgzsa) +
+ WARP_UCODE_SIZE(warp_g200_tgzsaf) +
+ WARP_UCODE_SIZE(warp_g200_tgzsf));
+
+
+unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv)
{
- unsigned int size;
-
- size = ( WARP_UCODE_SIZE( warp_g200_tgz ) +
- WARP_UCODE_SIZE( warp_g200_tgza ) +
- WARP_UCODE_SIZE( warp_g200_tgzaf ) +
- WARP_UCODE_SIZE( warp_g200_tgzf ) +
- WARP_UCODE_SIZE( warp_g200_tgzs ) +
- WARP_UCODE_SIZE( warp_g200_tgzsa ) +
- WARP_UCODE_SIZE( warp_g200_tgzsaf ) +
- WARP_UCODE_SIZE( warp_g200_tgzsf ) );
-
- size = PAGE_ALIGN( size );
-
- DRM_DEBUG( "G200 ucode size = %d bytes\n", size );
- return size;
+ switch (dev_priv->chipset) {
+ case MGA_CARD_TYPE_G400:
+ case MGA_CARD_TYPE_G550:
+ return PAGE_ALIGN(mga_warp_g400_microcode_size);
+ case MGA_CARD_TYPE_G200:
+ return PAGE_ALIGN(mga_warp_g200_microcode_size);
+ default:
+ return 0;
+ }
}
static int mga_warp_install_g400_microcode( drm_mga_private_t *dev_priv )
{
unsigned char *vcbase = dev_priv->warp->handle;
unsigned long pcbase = dev_priv->warp->offset;
- unsigned int size;
-
- size = mga_warp_g400_microcode_size( dev_priv );
- if ( size > dev_priv->warp->size ) {
- DRM_ERROR( "microcode too large! (%u > %lu)\n",
- size, dev_priv->warp->size );
- return DRM_ERR(ENOMEM);
- }
memset( dev_priv->warp_pipe_phys, 0,
sizeof(dev_priv->warp_pipe_phys) );
{
unsigned char *vcbase = dev_priv->warp->handle;
unsigned long pcbase = dev_priv->warp->offset;
- unsigned int size;
-
- size = mga_warp_g200_microcode_size( dev_priv );
- if ( size > dev_priv->warp->size ) {
- DRM_ERROR( "microcode too large! (%u > %lu)\n",
- size, dev_priv->warp->size );
- return DRM_ERR(ENOMEM);
- }
- memset( dev_priv->warp_pipe_phys, 0,
- sizeof(dev_priv->warp_pipe_phys) );
+ memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys));
- WARP_UCODE_INSTALL( warp_g200_tgz, MGA_WARP_TGZ );
- WARP_UCODE_INSTALL( warp_g200_tgzf, MGA_WARP_TGZF );
- WARP_UCODE_INSTALL( warp_g200_tgza, MGA_WARP_TGZA );
- WARP_UCODE_INSTALL( warp_g200_tgzaf, MGA_WARP_TGZAF );
- WARP_UCODE_INSTALL( warp_g200_tgzs, MGA_WARP_TGZS );
- WARP_UCODE_INSTALL( warp_g200_tgzsf, MGA_WARP_TGZSF );
- WARP_UCODE_INSTALL( warp_g200_tgzsa, MGA_WARP_TGZSA );
- WARP_UCODE_INSTALL( warp_g200_tgzsaf, MGA_WARP_TGZSAF );
+ WARP_UCODE_INSTALL(warp_g200_tgz, MGA_WARP_TGZ);
+ WARP_UCODE_INSTALL(warp_g200_tgzf, MGA_WARP_TGZF);
+ WARP_UCODE_INSTALL(warp_g200_tgza, MGA_WARP_TGZA);
+ WARP_UCODE_INSTALL(warp_g200_tgzaf, MGA_WARP_TGZAF);
+ WARP_UCODE_INSTALL(warp_g200_tgzs, MGA_WARP_TGZS);
+ WARP_UCODE_INSTALL(warp_g200_tgzsf, MGA_WARP_TGZSF);
+ WARP_UCODE_INSTALL(warp_g200_tgzsa, MGA_WARP_TGZSA);
+ WARP_UCODE_INSTALL(warp_g200_tgzsaf, MGA_WARP_TGZSAF);
return 0;
}
int mga_warp_install_microcode( drm_mga_private_t *dev_priv )
{
- switch ( dev_priv->chipset ) {
+ const unsigned int size = mga_warp_microcode_size(dev_priv);
+
+ DRM_DEBUG("MGA ucode size = %d bytes\n", size);
+ if (size > dev_priv->warp->size) {
+ DRM_ERROR("microcode too large! (%u > %lu)\n",
+ size, dev_priv->warp->size);
+ return DRM_ERR(ENOMEM);
+ }
+
+ switch (dev_priv->chipset) {
case MGA_CARD_TYPE_G400:
- return mga_warp_install_g400_microcode( dev_priv );
+ case MGA_CARD_TYPE_G550:
+ return mga_warp_install_g400_microcode(dev_priv);
case MGA_CARD_TYPE_G200:
return mga_warp_install_g200_microcode( dev_priv );
default:
*/
switch ( dev_priv->chipset ) {
case MGA_CARD_TYPE_G400:
- MGA_WRITE( MGA_WIADDR2, MGA_WMODE_SUSPEND );
- MGA_WRITE( MGA_WGETMSB, 0x00000E00 );
- MGA_WRITE( MGA_WVRTXSZ, 0x00001807 );
- MGA_WRITE( MGA_WACCEPTSEQ, 0x18000000 );
+ case MGA_CARD_TYPE_G550:
+ MGA_WRITE(MGA_WIADDR2, MGA_WMODE_SUSPEND);
+ MGA_WRITE(MGA_WGETMSB, 0x00000E00);
+ MGA_WRITE(MGA_WVRTXSZ, 0x00001807);
+ MGA_WRITE(MGA_WACCEPTSEQ, 0x18000000);
break;
case MGA_CARD_TYPE_G200:
MGA_WRITE( MGA_WIADDR, MGA_WMODE_SUSPEND );
projects / linux-2.6-omap-h63xx.git / commitdiff