Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
+# internal node to signify if we are only dealing with an S3C2412
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+ !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
+ default y if CPU_S3C2412
+
+config CPU_S3C2412
+ bool
+ depends on ARCH_S3C2410
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
config CPU_S3C244X
bool
depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+# S3C2412 support
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+
+#
# S3C244X support
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
#include "clock.h"
#include "s3c2400.h"
#include "s3c2410.h"
+#include "s3c2412.h"
#include "s3c244x.h"
#include "s3c2440.h"
#include "s3c2442.h"
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
+static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2410a[] = "S3C2410A";
.init = s3c2442_init,
.name = name_s3c2442
},
+ {
+ .idcode = 0x32412001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_clocks = s3c2412_init_clocks,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
{
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
static struct cpu_table *cpu;
+static unsigned long s3c24xx_read_idcode_v5(void)
+{
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+ return __raw_readl(S3C2412_GSTATUS1);
+#else
+ return 1UL; /* don't look like an 2400 */
+#endif
+}
+
+static unsigned long s3c24xx_read_idcode_v4(void)
+{
+#ifndef CONFIG_CPU_S3C2400
+ return __raw_readl(S3C2410_GSTATUS1);
+#else
+ return 0UL;
+#endif
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-#ifndef CONFIG_CPU_S3C2400
- idcode = __raw_readl(S3C2410_GSTATUS1);
-#endif
+ if (cpu_architecture() >= CPU_ARCH_ARMv5) {
+ idcode = s3c24xx_read_idcode_v5();
+ } else {
+ idcode = s3c24xx_read_idcode_v4();
+ }
cpu = s3c_lookup_cpu(idcode);
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/s3c2412.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 16-May-2003 BJD Created initial version
+ * 16-Aug-2003 BJD Fixed header files and copyright, added URL
+ * 05-Sep-2003 BJD Moved to kernel v2.6
+ * 18-Jan-2004 BJD Added serial port configuration
+ * 21-Aug-2004 BJD Added new struct s3c2410_board handler
+ * 28-Sep-2004 BJD Updates for new serial port bits
+ * 04-Nov-2004 BJD Updated UART configuration process
+ * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
+ * 13-Aug-2005 DA Removed UART from initial I/O mappings
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-dsc.h>
+
+#include "s3c2412.h"
+#include "cpu.h"
+#include "devs.h"
+#include "clock.h"
+#include "pm.h"
+
+#ifndef CONFIG_CPU_S3C2412_ONLY
+void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+#endif
+
+/* Initial IO mappings */
+
+static struct map_desc s3c2412_iodesc[] __initdata = {
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(LCD),
+ IODESC_ENT(TIMER),
+ IODESC_ENT(ADC),
+ IODESC_ENT(WATCHDOG),
+};
+
+/* uart registration process */
+
+void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
+
+ /* rename devices that are s3c2412/s3c2413 specific */
+ s3c_device_sdi.name = "s3c2412-sdi";
+ s3c_device_nand.name = "s3c2412-nand";
+}
+
+/* s3c2412_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+*/
+
+void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ /* move base of IO */
+
+ s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+
+ /* register our io-tables */
+
+ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
+ iotable_init(mach_desc, mach_size);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
+ unsigned long tmp;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+
+ /* now we've got our machine bits initialised, work out what
+ * clocks we've got */
+
+ fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+
+ tmp = __raw_readl(S3C2410_CLKDIVN);
+
+ /* work out clock scalings */
+
+ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
+ hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1);
+ pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
+
+ /* print brieft summary of clocks, etc */
+
+ printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+ print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+ /* initialise the clocks here, to allow other things like the
+ * console to use them
+ */
+
+ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+ s3c2412_baseclk_add();
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2412 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+#ifdef CONFIG_PM
+static struct sleep_save s3c2412_sleep[] = {
+ SAVE_ITEM(S3C2412_DSC0),
+ SAVE_ITEM(S3C2412_DSC1),
+ SAVE_ITEM(S3C2413_GPJDAT),
+ SAVE_ITEM(S3C2413_GPJCON),
+ SAVE_ITEM(S3C2413_GPJUP),
+
+ /* save the sleep configuration anyway, just in case these
+ * get damaged during wakeup */
+
+ SAVE_ITEM(S3C2412_GPBSLPCON),
+ SAVE_ITEM(S3C2412_GPCSLPCON),
+ SAVE_ITEM(S3C2412_GPDSLPCON),
+ SAVE_ITEM(S3C2412_GPESLPCON),
+ SAVE_ITEM(S3C2412_GPFSLPCON),
+ SAVE_ITEM(S3C2412_GPGSLPCON),
+ SAVE_ITEM(S3C2412_GPHSLPCON),
+ SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static int s3c2412_suspend(struct sys_device *dev, pm_message_t state)
+{
+ s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+static int s3c2412_resume(struct sys_device *dev)
+{
+ s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+#else
+#define s3c2412_suspend NULL
+#define s3c2412_resume NULL
+#endif
+
+struct sysdev_class s3c2412_sysclass = {
+ set_kset_name("s3c2412-core"),
+ .suspend = s3c2412_suspend,
+ .resume = s3c2412_resume
+};
+
+static int __init s3c2412_core_init(void)
+{
+ return sysdev_class_register(&s3c2412_sysclass);
+}
+
+core_initcall(s3c2412_core_init);
+
+static struct sys_device s3c2412_sysdev = {
+ .cls = &s3c2412_sysclass,
+};
+
+int __init s3c2412_init(void)
+{
+ printk("S3C2412: Initialising architecture\n");
+
+ return sysdev_register(&s3c2412_sysdev);
+}
--- /dev/null
+/* arch/arm/mach-s3c2410/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_init(void);
+
+extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
.endm
.macro senduart,rd,rx
- str \rd, [\rx, # S3C2410_UTXH ]
+ strb \rd, [\rx, # S3C2410_UTXH ]
.endm
.macro busyuart, rd, rx
beq 1001f @
@ FIFO enabled...
1003:
+ @ check for arm920 vs arm926. currently assume all arm926
+ @ devices have an 64 byte FIFO identical to the s3c2440
+ mrc p15, 0, \rd, c0, c0
+ and \rd, \rd, #0xff0
+ teq \rd, #0x260
+ beq 1004f
mrc p15, 0, \rd, c1, c0
tst \rd, #1
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
-
+1004:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
#define S3C24XX_PA_SPI S3C2410_PA_SPI
#endif
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
#endif /* __ASM_ARCH_MAP_H */
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
+#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
+
#define S3C2440_SELECT_DSC0 (0)
#define S3C2440_SELECT_DSC1 (1<<31)
#define S3C24XX_MISCCR S3C2400_MISCCR
#else
#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR S3C2410_MISCCR
+#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
#endif /* CONFIG_CPU_S3C2400 */
#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */
#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
-/* configure GPIO ports A..G */
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
/* port A - S3C2410: 22bits, zero in bit X makes pin X output
* S3C2400: 18bits, zero in bit X makes pin X output
#define S3C2410_GPH10_OUTP (0x01 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
/* miscellaneous control */
#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
+#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
+
/* see clock.h for dclk definitions */
/* pullup control on databus */
#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
#define S3C2410_MISCCR_CLK0_MASK (7<<4)
+#define S3C2412_MISCCR_CLK0_RTC (2<<4)
+
#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
#define S3C2410_MISCCR_CLK1_MASK (7<<8)
+#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8)
+
#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE (1<<19)
+#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */
#define S3C2410_MISCCR_SDSLEEP (7<<17)
/* external interrupt control... */
#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
+#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
+
/* values for S3C2410_EXTINT0/1/2 */
#define S3C2410_EXTINT_LOWLEV (0x00)
#define S3C2410_EXTINT_HILEV (0x01)
#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
+#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0)
+
/* values for interrupt filtering */
#define S3C2410_EINTFLT_PCLK (0x00)
#define S3C2410_EINTFLT_EXTCLK (1<<7)
/* GSTATUS have miscellaneous information in them
*
+ * These move between s3c2410 and s3c2412 style systems.
*/
#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC)
+
#define S3C2410_GSTATUS0_nWAIT (1<<3)
#define S3C2410_GSTATUS0_NCON (1<<2)
#define S3C2410_GSTATUS0_RnB (1<<1)
#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
#define S3C2410_GSTATUS1_2410 (0x32410000)
+#define S3C2410_GSTATUS1_2412 (0x32412001)
#define S3C2410_GSTATUS1_2440 (0x32440000)
#define S3C2410_GSTATUS1_2442 (0x32440aaa)
#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5)
#define S3C2400_OPENCR_OPC_MOSIEN (1<<5)
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C)
+#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HI(x) ( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PDWN(x) ( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2))
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
+#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C)
+
#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
#define S3C2440_GPJ0_INP (0x00 << 0)
#define S3C2440_GPJ0_OUTP (0x01 << 0)
projects / linux-2.6-omap-h63xx.git / commitdiff