* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/sections.h>
#include <asm/time.h>
+#include <irq.h>
+
/*
* The integer part of the number of usecs per jiffy is taken from tick,
* but the fractional part is not recorded, so we calculate it using the
/* how many counter cycles in a jiffy */
static unsigned long cycles_per_jiffy __read_mostly;
-/* expirelo is the count value for next CPU timer interrupt */
-static unsigned int expirelo;
-
-
/*
* Null timer ack for systems not needing one (e.g. i8254).
*/
*/
static void c0_timer_ack(void)
{
- unsigned int count;
-
- /* Ack this timer interrupt and set the next one. */
- expirelo += cycles_per_jiffy;
- write_c0_compare(expirelo);
-
- /* Check to see if we have missed any timer interrupts. */
- while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
- /* missed_timer_count++; */
- expirelo = count + cycles_per_jiffy;
- write_c0_compare(expirelo);
- }
+ write_c0_compare(read_c0_compare());
}
/*
return read_c0_count();
}
-/* For use both as a high precision timer and an interrupt source. */
-static void __init c0_hpt_timer_init(void)
-{
- expirelo = read_c0_count() + cycles_per_jiffy;
- write_c0_compare(expirelo);
-}
-
int (*mips_timer_state)(void);
void (*mips_timer_ack)(void);
update_process_times(user_mode(get_irq_regs()));
}
-/*
- * High-level timer interrupt service routines. This function
- * is set as irqaction->handler and is invoked through do_IRQ.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- write_seqlock(&xtime_lock);
-
- mips_timer_ack();
-
- /*
- * call the generic timer interrupt handling
- */
- do_timer(1);
-
- write_sequnlock(&xtime_lock);
-
- /*
- * In UP mode, we call local_timer_interrupt() to do profiling
- * and process accouting.
- *
- * In SMP mode, local_timer_interrupt() is invoked by appropriate
- * low-level local timer interrupt handler.
- */
- local_timer_interrupt(irq, dev_id);
-
- return IRQ_HANDLED;
-}
-
int null_perf_irq(void)
{
return 0;
!r2;
}
-void ll_timer_interrupt(int irq, void *dev_id)
-{
- int cpu = smp_processor_id();
-
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * In an SMTC system, one Count/Compare set exists per VPE.
- * Which TC within a VPE gets the interrupt is essentially
- * random - we only know that it shouldn't be one with
- * IXMT set. Whichever TC gets the interrupt needs to
- * send special interprocessor interrupts to the other
- * TCs to make sure that they schedule, etc.
- *
- * That code is specific to the SMTC kernel, not to
- * the a particular platform, so it's invoked from
- * the general MIPS timer_interrupt routine.
- */
-
- /*
- * We could be here due to timer interrupt,
- * perf counter overflow, or both.
- */
- (void) handle_perf_irq(1);
-
- if (read_c0_cause() & (1 << 30)) {
- /*
- * There are things we only want to do once per tick
- * in an "MP" system. One TC of each VPE will take
- * the actual timer interrupt. The others will get
- * timer broadcast IPIs. We use whoever it is that takes
- * the tick on VPE 0 to run the full timer_interrupt().
- */
- if (cpu_data[cpu].vpe_id == 0) {
- timer_interrupt(irq, NULL);
- } else {
- write_c0_compare(read_c0_count() +
- (mips_hpt_frequency/HZ));
- local_timer_interrupt(irq, dev_id);
- }
- smtc_timer_broadcast(cpu_data[cpu].vpe_id);
- }
-#else /* CONFIG_MIPS_MT_SMTC */
- int r2 = cpu_has_mips_r2;
-
- if (handle_perf_irq(r2))
- return;
-
- if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
- return;
-
- if (cpu == 0) {
- /*
- * CPU 0 handles the global timer interrupt job and process
- * accounting resets count/compare registers to trigger next
- * timer int.
- */
- timer_interrupt(irq, NULL);
- } else {
- /* Everyone else needs to reset the timer int here as
- ll_local_timer_interrupt doesn't */
- /*
- * FIXME: need to cope with counter underflow.
- * More support needs to be added to kernel/time for
- * counter/timer interrupts on multiple CPU's
- */
- write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
-
- /*
- * Other CPUs should do profiling and process accounting
- */
- local_timer_interrupt(irq, dev_id);
- }
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-
/*
* time_init() - it does the following things.
*
unsigned int mips_hpt_frequency;
-static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
static unsigned int __init calibrate_hpt(void)
{
cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned int cnt;
+
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+
+ return ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
+}
+
+static void mips_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ /* Nothing to do ... */
+}
+
+struct clock_event_device mips_clockevent;
+
+static struct clock_event_device *global_cd[NR_CPUS];
+static int cp0_timer_irq_installed;
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ const int r2 = cpu_has_mips_r2;
+ struct clock_event_device *cd;
+ int cpu = smp_processor_id();
+
+ /*
+ * Suckage alert:
+ * Before R2 of the architecture there was no way to see if a
+ * performance counter interrupt was pending, so we have to run
+ * the performance counter interrupt handler anyway.
+ */
+ if (handle_perf_irq(r2))
+ goto out;
+
+ /*
+ * The same applies to performance counter interrupts. But with the
+ * above we now know that the reason we got here must be a timer
+ * interrupt. Being the paranoiacs we are we check anyway.
+ */
+ if (!r2 || (read_c0_cause() & (1 << 30))) {
+ c0_timer_ack();
+ cd = global_cd[cpu];
+ cd->event_handler(cd);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irqaction = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "timer",
+};
+
static void __init init_mips_clocksource(void)
{
u64 temp;
{
}
+void __init __weak plat_timer_setup(struct irqaction *irq)
+{
+}
+
+void __cpuinit mips_clockevent_init(void)
+{
+ uint64_t mips_freq = mips_hpt_frequency;
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
+
+ if (!cpu_has_counter)
+ return;
+
+ if (cpu == 0)
+ cd = &mips_clockevent;
+ else
+ cd = kzalloc(sizeof(*cd), GFP_ATOMIC);
+ if (!cd)
+ return; /* We're probably roadkill ... */
+
+ cd->name = "MIPS";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ /* Calculate the min / max delta */
+ cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+ cd->shift = 32;
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x30, cd);
+
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = mips_next_event;
+ cd->set_mode = mips_set_mode;
+
+ global_cd[cpu] = cd;
+ clockevents_register_device(cd);
+
+ if (!cp0_timer_irq_installed) {
+#ifdef CONFIG_MIPS_MT_SMTC
+#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
+ setup_irq_smtc(irq, &timer_irqaction, CPUCTR_IMASKBIT);
+#else
+ setup_irq(irq, &timer_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
+ cp0_timer_irq_installed = 1;
+ }
+}
+
void __init time_init(void)
{
plat_time_init();
/* Calculate cache parameters. */
cycles_per_jiffy =
(mips_hpt_frequency + HZ / 2) / HZ;
- /*
- * This sets up the high precision
- * timer for the first interrupt.
- */
- c0_hpt_timer_init();
}
}
if (!mips_hpt_frequency)
printk("Using %u.%03u MHz high precision timer.\n",
((mips_hpt_frequency + 500) / 1000) / 1000,
((mips_hpt_frequency + 500) / 1000) % 1000);
+
+#ifdef CONFIG_IRQ_CPU
+ setup_irq(MIPS_CPU_IRQ_BASE + 7, &timer_irqaction);
+#endif
}
if (!mips_timer_ack)
plat_timer_setup(&timer_irqaction);
init_mips_clocksource();
+ mips_clockevent_init();
}
projects / linux-2.6-omap-h63xx.git / commitdiff