{  -1,                  -1,             -1,             -1},
 };
 
-/* Pinnacle PCTV HD Mini (80e) GPIOs
-   0-5: not used
-   6:   demod reset, active low
-   7:   LED on, active high */
-static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
-       {EM28XX_R06_I2C_CLK,    0x45,   0xff,             10}, /*400 KHz*/
-       {EM2874_R80_GPIO,       0x80,   0xff,             100},/*Demod reset*/
-       {EM2874_R80_GPIO,       0xc0,   0xff,             10},
-       {  -1,                  -1,     -1,               -1},
-};
-
 /*
  *  Board definitions
  */
                        .amux     = EM28XX_AMUX_LINE_IN,
                } },
        },
-
-       /* em2874 tuners are DVB only */
-
-       [EM2874_BOARD_PINNACLE_PCTV_80E] = {
-               .name         = "Pinnacle PCTV HD Mini",
-               .tuner_type   = TUNER_ABSENT,
-               .has_dvb      = 1,
-               .dvb_gpio     = em2874_pinnacle_80e_digital,
-               .ir_codes     = ir_codes_pinnacle_pctv_hd,
-               .decoder      = EM28XX_NODECODER,
-               .i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
-                               EM2874_I2C_SECONDARY_BUS_SELECT |
-                               EM28XX_I2C_FREQ_400_KHZ,
-#ifdef DJH_DEBUG
-               .input        = { {
-                       .type     = EM28XX_VMUX_TELEVISION,
-                       .vmux     = TVP5150_COMPOSITE0,
-                       .amux     = EM28XX_AMUX_LINE_IN,
-               } },
-#endif
-       },
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
                        .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
        { USB_DEVICE(0x2304, 0x0227),
                        .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
-       { USB_DEVICE(0x2304, 0x023f),
-                       .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
        { USB_DEVICE(0x0413, 0x6023),
                        .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
        { USB_DEVICE(0x093b, 0xa005),