+++ /dev/null
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/string.h>
-#include <linux/bitops.h>
-#include <linux/smp.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/msr.h>
-#include <asm/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/ds.h>
-#include <asm/bugs.h>
-
-#ifdef CONFIG_X86_64
-#include <asm/topology.h>
-#include <asm/numa_64.h>
-#endif
-
-#include "cpu.h"
-
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <mach_apic.h>
-#endif
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
- if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
- (c->x86 == 0x6 && c->x86_model >= 0x0e))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-#ifdef CONFIG_X86_64
- set_cpu_cap(c, X86_FEATURE_SYSENTER32);
-#else
- /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
- if (c->x86 == 15 && c->x86_cache_alignment == 64)
- c->x86_cache_alignment = 128;
-#endif
-}
-
-#ifdef CONFIG_X86_32
-/*
- * Early probe support logic for ppro memory erratum #50
- *
- * This is called before we do cpu ident work
- */
-
-int __cpuinit ppro_with_ram_bug(void)
-{
- /* Uses data from early_cpu_detect now */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86 == 6 &&
- boot_cpu_data.x86_model == 1 &&
- boot_cpu_data.x86_mask < 8) {
- printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
- return 1;
- }
- return 0;
-}
-
-
-/*
- * P4 Xeon errata 037 workaround.
- * Hardware prefetcher may cause stale data to be loaded into the cache.
- */
-static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
-{
- unsigned long lo, hi;
-
- if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
- rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
- if ((lo & (1<<9)) == 0) {
- printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
- printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
- lo |= (1<<9); /* Disable hw prefetching */
- wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
- }
- }
-}
-
-
-
-#ifdef CONFIG_X86_F00F_BUG
-static void __cpuinit trap_init_f00f_bug(void)
-{
- __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
-
- /*
- * Update the IDT descriptor and reload the IDT so that
- * it uses the read-only mapped virtual address.
- */
- idt_descr.address = fix_to_virt(FIX_F00F_IDT);
- load_idt(&idt_descr);
-}
-#endif
-#endif
-
-static void __cpuinit srat_detect_node(void)
-{
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
- unsigned node;
- int cpu = smp_processor_id();
- int apicid = hard_smp_processor_id();
-
- /* Don't do the funky fallback heuristics the AMD version employs
- for now. */
- node = apicid_to_node[apicid];
- if (node == NUMA_NO_NODE || !node_online(node))
- node = first_node(node_online_map);
- numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
- unsigned int eax, ebx, ecx, edx;
-
- if (c->cpuid_level < 4)
- return 1;
-
- /* Intel has a non-standard dependency on %ecx for this CPUID level. */
- cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
- if (eax & 0x1f)
- return ((eax >> 26) + 1);
- else
- return 1;
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
- unsigned int l2 = 0;
- char *p = NULL;
-
- early_init_intel(c);
-
-#ifdef CONFIG_X86_F00F_BUG
- /*
- * All current models of Pentium and Pentium with MMX technology CPUs
- * have the F0 0F bug, which lets nonprivileged users lock up the system.
- * Note that the workaround only should be initialized once...
- */
- c->f00f_bug = 0;
- if (!paravirt_enabled() && c->x86 == 5) {
- static int f00f_workaround_enabled;
-
- c->f00f_bug = 1;
- if (!f00f_workaround_enabled) {
- trap_init_f00f_bug();
- printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
- f00f_workaround_enabled = 1;
- }
- }
-#endif
-
- l2 = init_intel_cacheinfo(c);
- if (c->cpuid_level > 9) {
- unsigned eax = cpuid_eax(10);
- /* Check for version and the number of counters */
- if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
- set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
- }
-
-#ifdef CONFIG_X86_32
- /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
- if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
- clear_cpu_cap(c, X86_FEATURE_SEP);
-
- /*
- * Names for the Pentium II/Celeron processors
- * detectable only by also checking the cache size.
- * Dixon is NOT a Celeron.
- */
- if (c->x86 == 6) {
- switch (c->x86_model) {
- case 5:
- if (c->x86_mask == 0) {
- if (l2 == 0)
- p = "Celeron (Covington)";
- else if (l2 == 256)
- p = "Mobile Pentium II (Dixon)";
- }
- break;
-
- case 6:
- if (l2 == 128)
- p = "Celeron (Mendocino)";
- else if (c->x86_mask == 0 || c->x86_mask == 5)
- p = "Celeron-A";
- break;
-
- case 8:
- if (l2 == 128)
- p = "Celeron (Coppermine)";
- break;
- }
- }
-
- if (p)
- strcpy(c->x86_model_id, p);
-
- Intel_errata_workarounds(c);
-
-#ifdef CONFIG_X86_INTEL_USERCOPY
- /*
- * Set up the preferred alignment for movsl bulk memory moves
- */
- switch (c->x86) {
- case 4: /* 486: untested */
- break;
- case 5: /* Old Pentia: untested */
- break;
- case 6: /* PII/PIII only like movsl with 8-byte alignment */
- movsl_mask.mask = 7;
- break;
- case 15: /* P4 is OK down to 8-byte alignment */
- movsl_mask.mask = 7;
- break;
- }
-#endif
-
-#endif
-
- if (cpu_has_xmm2)
- set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
- if (cpu_has_ds) {
- unsigned int l1;
- rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
- if (!(l1 & (1<<11)))
- set_cpu_cap(c, X86_FEATURE_BTS);
- if (!(l1 & (1<<12)))
- set_cpu_cap(c, X86_FEATURE_PEBS);
- ds_init_intel(c);
- }
-
-#ifdef CONFIG_X86_64
- if (c->x86 == 15)
- c->x86_cache_alignment = c->x86_clflush_size * 2;
- if (c->x86 == 6)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-#else
- if (c->x86 == 15)
- set_cpu_cap(c, X86_FEATURE_P4);
- if (c->x86 == 6)
- set_cpu_cap(c, X86_FEATURE_P3);
-
- if (cpu_has_bts)
- ptrace_bts_init_intel(c);
-
- /*
- * See if we have a good local APIC by checking for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
- if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
- (c->x86_mask < 0x6 || c->x86_mask == 0xb))
- set_cpu_cap(c, X86_FEATURE_11AP);
-
-#ifdef CONFIG_X86_NUMAQ
- numaq_tsc_disable();
-#endif
-#endif
-
- detect_extended_topology(c);
- if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
- /*
- * let's use the legacy cpuid vector 0x1 and 0x4 for topology
- * detection.
- */
- c->x86_max_cores = intel_num_cpu_cores(c);
-#ifdef CONFIG_X86_32
- detect_ht(c);
-#endif
- }
-
- /* Work around errata */
- srat_detect_node();
-}
-
-#ifdef CONFIG_X86_32
-static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
-{
- /*
- * Intel PIII Tualatin. This comes in two flavours.
- * One has 256kb of cache, the other 512. We have no way
- * to determine which, so we use a boottime override
- * for the 512kb model, and assume 256 otherwise.
- */
- if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
- size = 256;
- return size;
-}
-#endif
-
-static struct cpu_dev intel_cpu_dev __cpuinitdata = {
- .c_vendor = "Intel",
- .c_ident = { "GenuineIntel" },
-#ifdef CONFIG_X86_32
- .c_models = {
- { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
- {
- [0] = "486 DX-25/33",
- [1] = "486 DX-50",
- [2] = "486 SX",
- [3] = "486 DX/2",
- [4] = "486 SL",
- [5] = "486 SX/2",
- [7] = "486 DX/2-WB",
- [8] = "486 DX/4",
- [9] = "486 DX/4-WB"
- }
- },
- { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
- {
- [0] = "Pentium 60/66 A-step",
- [1] = "Pentium 60/66",
- [2] = "Pentium 75 - 200",
- [3] = "OverDrive PODP5V83",
- [4] = "Pentium MMX",
- [7] = "Mobile Pentium 75 - 200",
- [8] = "Mobile Pentium MMX"
- }
- },
- { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
- {
- [0] = "Pentium Pro A-step",
- [1] = "Pentium Pro",
- [3] = "Pentium II (Klamath)",
- [4] = "Pentium II (Deschutes)",
- [5] = "Pentium II (Deschutes)",
- [6] = "Mobile Pentium II",
- [7] = "Pentium III (Katmai)",
- [8] = "Pentium III (Coppermine)",
- [10] = "Pentium III (Cascades)",
- [11] = "Pentium III (Tualatin)",
- }
- },
- { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
- {
- [0] = "Pentium 4 (Unknown)",
- [1] = "Pentium 4 (Willamette)",
- [2] = "Pentium 4 (Northwood)",
- [4] = "Pentium 4 (Foster)",
- [5] = "Pentium 4 (Foster)",
- }
- },
- },
- .c_size_cache = intel_size_cache,
-#endif
- .c_early_init = early_init_intel,
- .c_init = init_intel,
- .c_x86_vendor = X86_VENDOR_INTEL,
-};
-
-cpu_dev_register(intel_cpu_dev);
-
projects / linux-2.6-omap-h63xx.git / commitdiff