* XIP support hooks by Vitaly Wool (based on code for Intel flash
  * by Nicolas Pitre)
  *
+ * 25/09/2008 Christopher Moore: TopBottom fixup for many Macronix with CFI V1.0
+ *
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
 
 #define MANUFACTURER_AMD       0x0001
 #define MANUFACTURER_ATMEL     0x001F
+#define MANUFACTURER_MACRONIX  0x00C2
 #define MANUFACTURER_SST       0x00BF
 #define SST49LF004B            0x0060
 #define SST49LF040B            0x0050
 
        if (((major << 8) | minor) < 0x3131) {
                /* CFI version 1.0 => don't trust bootloc */
+
+               DEBUG(MTD_DEBUG_LEVEL1,
+                       "%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n",
+                       map->name, cfi->mfr, cfi->id);
+
+               /* AFAICS all 29LV400 with a bottom boot block have a device ID
+                * of 0x22BA in 16-bit mode and 0xBA in 8-bit mode.
+                * These were badly detected as they have the 0x80 bit set
+                * so treat them as a special case.
+                */
+               if (((cfi->id == 0xBA) || (cfi->id == 0x22BA)) &&
+
+                       /* Macronix added CFI to their 2nd generation
+                        * MX29LV400C B/T but AFAICS no other 29LV400 (AMD,
+                        * Fujitsu, Spansion, EON, ESI and older Macronix)
+                        * has CFI.
+                        *
+                        * Therefore also check the manufacturer.
+                        * This reduces the risk of false detection due to
+                        * the 8-bit device ID.
+                        */
+                       (cfi->mfr == MANUFACTURER_MACRONIX)) {
+                       DEBUG(MTD_DEBUG_LEVEL1,
+                               "%s: Macronix MX29LV400C with bottom boot block"
+                               " detected\n", map->name);
+                       extp->TopBottom = 2;    /* bottom boot */
+               } else
                if (cfi->id & 0x80) {
                        printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id);
                        extp->TopBottom = 3;    /* top boot */
                } else {
                        extp->TopBottom = 2;    /* bottom boot */
                }
+
+               DEBUG(MTD_DEBUG_LEVEL1,
+                       "%s: AMD CFI PRI V%c.%c has no boot block field;"
+                       " deduced %s from Device ID\n", map->name, major, minor,
+                       extp->TopBottom == 2 ? "bottom" : "top");
        }
 }
 #endif
        { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
        { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
+       { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock, NULL },
 #endif
        { CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, },
        { CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, },