[MTD] maps: Add mapping driver for PQ2FADS boards.

From: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index aa5d71f8d81218df730e9324f788765feda3293b..8e3e93d62525e2de0a88f824073527bb0eb95169 100644 (file)
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,5 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $
+# $Id: Kconfig,v 1.58 2005/09/14 19:14:13 tpoynor Exp $
 
 menu "Mapping drivers for chip access"
        depends on MTD!=n
@@ -520,6 +520,12 @@ config MTD_MPC1211
          This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
          If you have such a board, say 'Y'.
 
+config MTD_PQ2FADS
+       tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
+       depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
+       help
+        This enables access to flash SIMM on PQ2FADS-like boards
+
 config MTD_OMAP_NOR
        tristate "TI OMAP board mappings"
        depends on MTD_CFI && ARCH_OMAP

diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 7bcbc49e329f24c94ec7d1ee714c29e8ecab1a5f..095517847c772ae1e99cb7f9a90e7a4f9a4e2ead 100644 (file)
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,7 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $
+# $Id: Makefile.common,v 1.31 2005/09/14 19:14:13 tpoynor Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)              += map_funcs.o
@@ -70,3 +70,4 @@ obj-$(CONFIG_MTD_DMV182)      += dmv182.o
 obj-$(CONFIG_MTD_SHARP_SL)     += sharpsl-flash.o
 obj-$(CONFIG_MTD_PLATRAM)      += plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)     += omap_nor.o
+obj-$(CONFIG_MTD_PQ2FADS)      += pq2fads.o

diff --git a/drivers/mtd/maps/pq2fads.c b/drivers/mtd/maps/pq2fads.c
new file mode 100644 (file)
index 0000000..e959076
--- /dev/null
+++ b/drivers/mtd/maps/pq2fads.c
@@ -0,0 +1,88 @@
+/*
+ * drivers/mtd/maps/pq2fads.c
+ *
+ * Mapping for the flash SIMM on 8272ADS and PQ2FADS board
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/ppcboot.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+/*
+  NOTE: bank width and interleave relative to the installed flash 
+  should have been chosen within MTD_CFI_GEOMETRY options.
+  */
+#define PQ2FADS_BANK_WIDTH 4
+
+static struct mtd_partition pq2fads_partitions[] = {
+       {
+#ifdef CONFIG_ADS8272
+               .name           = "HRCW",
+               .size           = 0x40000,
+               .offset         = 0,
+               .mask_flags     = MTD_WRITEABLE,  /* force read-only */
+       }, { 
+               .name           = "User FS",
+               .size           = 0x5c0000,
+               .offset         = 0x40000,
+#else
+               .name           = "User FS",
+               .size           = 0x600000,
+               .offset         = 0,
+#endif
+       }, {    
+               .name           = "uImage",
+               .size           = 0x100000,
+               .offset         = 0x600000,
+               .mask_flags     = MTD_WRITEABLE,  /* force read-only */
+       }, {    
+               .name           = "bootloader",
+               .size           = 0x40000,
+               .offset         = 0x700000,
+               .mask_flags     = MTD_WRITEABLE,  /* force read-only */
+       }, {    
+               .name           = "bootloader env",
+               .size           = 0x40000,
+               .offset         = 0x740000,
+               .mask_flags     = MTD_WRITEABLE,  /* force read-only */
+       }
+};
+
+
+/* pointer to MPC885ADS board info data */
+extern unsigned char __res[];
+
+static int __init init_pq2fads_mtd(void)
+{
+       bd_t *bd = (bd_t *)__res;
+       physmap_configure(bd->bi_flashstart, bd->bi_flashsize, PQ2FADS_BANK_WIDTH, NULL);
+
+       physmap_set_partitions(pq2fads_partitions,
+                               sizeof (pq2fads_partitions) /
+                               sizeof (pq2fads_partitions[0]));
+       return 0;
+}
+
+static void __exit cleanup_pq2fads_mtd(void)
+{
+}
+                                                                                                                                                    
+module_init(init_pq2fads_mtd);
+module_exit(cleanup_pq2fads_mtd);
+                                                                                                                                                    
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map and partitions for MPC8272ADS boards");