This driver provides thermal control for the PowerMac9,1
which is the recent (SMU based) single CPU desktop G5
+config WINDFARM_PM112
+ tristate "Support for thermal management on PowerMac11,2"
+ depends on WINDFARM && I2C && PMAC_SMU
+ select I2C_PMAC_SMU
+ help
+ This driver provides thermal control for the PowerMac11,2
+ which are the recent dual and quad G5 machines using the
+ 970MP dual-core processor.
config ANSLCD
tristate "Support for ANS LCD display"
windfarm_smu_sensors.o \
windfarm_lm75_sensor.o windfarm_pid.o \
windfarm_cpufreq_clamp.o windfarm_pm91.o
+obj-$(CONFIG_WINDFARM_PM112) += windfarm_pm112.o windfarm_smu_sat.o \
+ windfarm_smu_controls.o \
+ windfarm_smu_sensors.o \
+ windfarm_max6690_sensor.o \
+ windfarm_lm75_sensor.o windfarm_pid.o
#include <linux/list.h>
#include <linux/module.h>
#include <linux/notifier.h>
+#include <linux/device.h>
/* Display a 16.16 fixed point value */
#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
char *name;
int type;
struct kref ref;
+ struct device_attribute attr;
};
#define WF_CONTROL_TYPE_GENERIC 0
struct wf_sensor_ops *ops;
char *name;
struct kref ref;
+ struct device_attribute attr;
};
/* Same lifetime rules as controls */
static unsigned int wf_overtemp_counter;
struct task_struct *wf_thread;
+static struct platform_device wf_platform_device = {
+ .name = "windfarm",
+};
+
/*
* Utilities & tick thread
*/
kfree(ct);
}
+static ssize_t wf_show_control(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+ s32 val = 0;
+ int err;
+
+ err = ctrl->ops->get_value(ctrl, &val);
+ if (err < 0)
+ return err;
+ return sprintf(buf, "%d\n", val);
+}
+
+/* This is really only for debugging... */
+static ssize_t wf_store_control(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+ int val;
+ int err;
+ char *endp;
+
+ val = simple_strtoul(buf, &endp, 0);
+ while (endp < buf + count && (*endp == ' ' || *endp == '\n'))
+ ++endp;
+ if (endp - buf < count)
+ return -EINVAL;
+ err = ctrl->ops->set_value(ctrl, val);
+ if (err < 0)
+ return err;
+ return count;
+}
+
int wf_register_control(struct wf_control *new_ct)
{
struct wf_control *ct;
kref_init(&new_ct->ref);
list_add(&new_ct->link, &wf_controls);
+ new_ct->attr.attr.name = new_ct->name;
+ new_ct->attr.attr.owner = THIS_MODULE;
+ new_ct->attr.attr.mode = 0644;
+ new_ct->attr.show = wf_show_control;
+ new_ct->attr.store = wf_store_control;
+ device_create_file(&wf_platform_device.dev, &new_ct->attr);
+
DBG("wf: Registered control %s\n", new_ct->name);
wf_notify(WF_EVENT_NEW_CONTROL, new_ct);
kfree(sr);
}
+static ssize_t wf_show_sensor(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wf_sensor *sens = container_of(attr, struct wf_sensor, attr);
+ s32 val = 0;
+ int err;
+
+ err = sens->ops->get_value(sens, &val);
+ if (err < 0)
+ return err;
+ return sprintf(buf, "%d.%03d\n", FIX32TOPRINT(val));
+}
+
int wf_register_sensor(struct wf_sensor *new_sr)
{
struct wf_sensor *sr;
kref_init(&new_sr->ref);
list_add(&new_sr->link, &wf_sensors);
+ new_sr->attr.attr.name = new_sr->name;
+ new_sr->attr.attr.owner = THIS_MODULE;
+ new_sr->attr.attr.mode = 0444;
+ new_sr->attr.show = wf_show_sensor;
+ new_sr->attr.store = NULL;
+ device_create_file(&wf_platform_device.dev, &new_sr->attr);
+
DBG("wf: Registered sensor %s\n", new_sr->name);
wf_notify(WF_EVENT_NEW_SENSOR, new_sr);
}
EXPORT_SYMBOL_GPL(wf_is_overtemp);
-static struct platform_device wf_platform_device = {
- .name = "windfarm",
-};
-
static int __init windfarm_core_init(void)
{
DBG("wf: core loaded\n");
--- /dev/null
+/*
+ * Windfarm PowerMac thermal control. MAX6690 sensor.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.1"
+
+/* This currently only exports the external temperature sensor,
+ since that's all the control loops need. */
+
+/* Some MAX6690 register numbers */
+#define MAX6690_INTERNAL_TEMP 0
+#define MAX6690_EXTERNAL_TEMP 1
+
+struct wf_6690_sensor {
+ struct i2c_client i2c;
+ struct wf_sensor sens;
+};
+
+#define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens)
+#define i2c_to_6690(x) container_of((x), struct wf_6690_sensor, i2c)
+
+static int wf_max6690_attach(struct i2c_adapter *adapter);
+static int wf_max6690_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_max6690_driver = {
+ .driver = {
+ .name = "wf_max6690",
+ },
+ .attach_adapter = wf_max6690_attach,
+ .detach_client = wf_max6690_detach,
+};
+
+static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
+{
+ struct wf_6690_sensor *max = wf_to_6690(sr);
+ s32 data;
+
+ if (max->i2c.adapter == NULL)
+ return -ENODEV;
+
+ /* chip gets initialized by firmware */
+ data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
+ if (data < 0)
+ return data;
+ *value = data << 16;
+ return 0;
+}
+
+static void wf_max6690_release(struct wf_sensor *sr)
+{
+ struct wf_6690_sensor *max = wf_to_6690(sr);
+
+ if (max->i2c.adapter) {
+ i2c_detach_client(&max->i2c);
+ max->i2c.adapter = NULL;
+ }
+ kfree(max);
+}
+
+static struct wf_sensor_ops wf_max6690_ops = {
+ .get_value = wf_max6690_get,
+ .release = wf_max6690_release,
+ .owner = THIS_MODULE,
+};
+
+static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
+{
+ struct wf_6690_sensor *max;
+ char *name = "u4-temp";
+
+ max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
+ if (max == NULL) {
+ printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
+ "no memory\n", name);
+ return;
+ }
+
+ max->sens.ops = &wf_max6690_ops;
+ max->sens.name = name;
+ max->i2c.addr = addr >> 1;
+ max->i2c.adapter = adapter;
+ max->i2c.driver = &wf_max6690_driver;
+ strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&max->i2c)) {
+ printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
+ goto fail;
+ }
+
+ if (wf_register_sensor(&max->sens)) {
+ i2c_detach_client(&max->i2c);
+ goto fail;
+ }
+
+ return;
+
+ fail:
+ kfree(max);
+}
+
+static int wf_max6690_attach(struct i2c_adapter *adapter)
+{
+ struct device_node *busnode, *dev = NULL;
+ struct pmac_i2c_bus *bus;
+ const char *loc;
+ u32 *reg;
+
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
+
+ while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+ if (!device_is_compatible(dev, "max6690"))
+ continue;
+ loc = get_property(dev, "hwsensor-location", NULL);
+ reg = (u32 *) get_property(dev, "reg", NULL);
+ if (!loc || !reg)
+ continue;
+ printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+ if (strcmp(loc, "BACKSIDE"))
+ continue;
+ wf_max6690_create(adapter, *reg);
+ }
+
+ return 0;
+}
+
+static int wf_max6690_detach(struct i2c_client *client)
+{
+ struct wf_6690_sensor *max = i2c_to_6690(client);
+
+ max->i2c.adapter = NULL;
+ wf_unregister_sensor(&max->sens);
+
+ return 0;
+}
+
+static int __init wf_max6690_sensor_init(void)
+{
+ return i2c_add_driver(&wf_max6690_driver);
+}
+
+static void __exit wf_max6690_sensor_exit(void)
+{
+ i2c_del_driver(&wf_max6690_driver);
+}
+
+module_init(wf_max6690_sensor_init);
+module_exit(wf_max6690_sensor_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("MAX6690 sensor objects for PowerMac thermal control");
+MODULE_LICENSE("GPL");
s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
{
- s64 error, integ, deriv, prop;
- s32 target, sval, adj;
+ s64 integ, deriv, prop;
+ s32 error, target, sval, adj;
int i, hlen = st->param.history_len;
/* Calculate error term */
integ += st->errors[(st->index + hlen - i) % hlen];
integ *= st->param.interval;
integ *= st->param.gr;
- sval = st->param.tmax - ((integ >> 20) & 0xffffffff);
+ sval = st->param.tmax - (s32)(integ >> 20);
adj = min(st->param.ttarget, sval);
DBG("integ: %lx, sval: %lx, adj: %lx\n", integ, sval, adj);
deriv *= st->param.gd;
/* Calculate proportional term */
- prop = (new_temp - adj);
+ prop = st->last_delta = (new_temp - adj);
prop *= st->param.gp;
DBG("deriv: %lx, prop: %lx\n", deriv, prop);
int index; /* index of current power */
int tindex; /* index of current temp */
s32 target; /* current target value */
+ s32 last_delta; /* last Tactual - Ttarget */
s32 powers[WF_PID_MAX_HISTORY]; /* power history buffer */
s32 errors[WF_PID_MAX_HISTORY]; /* error history buffer */
s32 temps[2]; /* temp. history buffer */
--- /dev/null
+/*
+ * Windfarm PowerMac thermal control.
+ * Control loops for machines with SMU and PPC970MP processors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+#undef LOTSA_DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+#ifdef LOTSA_DEBUG
+#define DBG_LOTS(args...) printk(args)
+#else
+#define DBG_LOTS(args...) do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 60 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+/* We currently only handle 2 chips, 4 cores... */
+#define NR_CHIPS 2
+#define NR_CORES 4
+#define NR_CPU_FANS 3 * NR_CHIPS
+
+/* Controls and sensors */
+static struct wf_sensor *sens_cpu_temp[NR_CORES];
+static struct wf_sensor *sens_cpu_power[NR_CORES];
+static struct wf_sensor *hd_temp;
+static struct wf_sensor *slots_power;
+static struct wf_sensor *u4_temp;
+
+static struct wf_control *cpu_fans[NR_CPU_FANS];
+static char *cpu_fan_names[NR_CPU_FANS] = {
+ "cpu-rear-fan-0",
+ "cpu-rear-fan-1",
+ "cpu-front-fan-0",
+ "cpu-front-fan-1",
+ "cpu-pump-0",
+ "cpu-pump-1",
+};
+static struct wf_control *cpufreq_clamp;
+
+/* Second pump isn't required (and isn't actually present) */
+#define CPU_FANS_REQD (NR_CPU_FANS - 2)
+#define FIRST_PUMP 4
+#define LAST_PUMP 5
+
+/* We keep a temperature history for average calculation of 180s */
+#define CPU_TEMP_HIST_SIZE 180
+
+/* Scale factor for fan speed, *100 */
+static int cpu_fan_scale[NR_CPU_FANS] = {
+ 100,
+ 100,
+ 97, /* inlet fans run at 97% of exhaust fan */
+ 97,
+ 100, /* updated later */
+ 100, /* updated later */
+};
+
+static struct wf_control *backside_fan;
+static struct wf_control *slots_fan;
+static struct wf_control *drive_bay_fan;
+
+/* PID loop state */
+static struct wf_cpu_pid_state cpu_pid[NR_CORES];
+static u32 cpu_thist[CPU_TEMP_HIST_SIZE];
+static int cpu_thist_pt;
+static s64 cpu_thist_total;
+static s32 cpu_all_tmax = 100 << 16;
+static int cpu_last_target;
+static struct wf_pid_state backside_pid;
+static int backside_tick;
+static struct wf_pid_state slots_pid;
+static int slots_started;
+static struct wf_pid_state drive_bay_pid;
+static int drive_bay_tick;
+
+static int nr_cores;
+static int have_all_controls;
+static int have_all_sensors;
+static int started;
+
+static int failure_state;
+#define FAILURE_SENSOR 1
+#define FAILURE_FAN 2
+#define FAILURE_PERM 4
+#define FAILURE_LOW_OVERTEMP 8
+#define FAILURE_HIGH_OVERTEMP 16
+
+/* Overtemp values */
+#define LOW_OVER_AVERAGE 0
+#define LOW_OVER_IMMEDIATE (10 << 16)
+#define LOW_OVER_CLEAR ((-10) << 16)
+#define HIGH_OVER_IMMEDIATE (14 << 16)
+#define HIGH_OVER_AVERAGE (10 << 16)
+#define HIGH_OVER_IMMEDIATE (14 << 16)
+
+
+/* Implementation... */
+static int create_cpu_loop(int cpu)
+{
+ int chip = cpu / 2;
+ int core = cpu & 1;
+ struct smu_sdbp_header *hdr;
+ struct smu_sdbp_cpupiddata *piddata;
+ struct wf_cpu_pid_param pid;
+ struct wf_control *main_fan = cpu_fans[0];
+ s32 tmax;
+ int fmin;
+
+ /* Get PID params from the appropriate SAT */
+ hdr = smu_sat_get_sdb_partition(chip, 0xC8 + core, NULL);
+ if (hdr == NULL) {
+ printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
+ return -EINVAL;
+ }
+ piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+ /* Get FVT params to get Tmax; if not found, assume default */
+ hdr = smu_sat_get_sdb_partition(chip, 0xC4 + core, NULL);
+ if (hdr) {
+ struct smu_sdbp_fvt *fvt = (struct smu_sdbp_fvt *)&hdr[1];
+ tmax = fvt->maxtemp << 16;
+ } else
+ tmax = 95 << 16; /* default to 95 degrees C */
+
+ /* We keep a global tmax for overtemp calculations */
+ if (tmax < cpu_all_tmax)
+ cpu_all_tmax = tmax;
+
+ /*
+ * Darwin has a minimum fan speed of 1000 rpm for the 4-way and
+ * 515 for the 2-way. That appears to be overkill, so for now,
+ * impose a minimum of 750 or 515.
+ */
+ fmin = (nr_cores > 2) ? 750 : 515;
+
+ /* Initialize PID loop */
+ pid.interval = 1; /* seconds */
+ pid.history_len = piddata->history_len;
+ pid.gd = piddata->gd;
+ pid.gp = piddata->gp;
+ pid.gr = piddata->gr / piddata->history_len;
+ pid.pmaxadj = (piddata->max_power << 16) - (piddata->power_adj << 8);
+ pid.ttarget = tmax - (piddata->target_temp_delta << 16);
+ pid.tmax = tmax;
+ pid.min = main_fan->ops->get_min(main_fan);
+ pid.max = main_fan->ops->get_max(main_fan);
+ if (pid.min < fmin)
+ pid.min = fmin;
+
+ wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+ return 0;
+}
+
+static void cpu_max_all_fans(void)
+{
+ int i;
+
+ /* We max all CPU fans in case of a sensor error. We also do the
+ * cpufreq clamping now, even if it's supposedly done later by the
+ * generic code anyway, we do it earlier here to react faster
+ */
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ for (i = 0; i < NR_CPU_FANS; ++i)
+ if (cpu_fans[i])
+ wf_control_set_max(cpu_fans[i]);
+}
+
+static int cpu_check_overtemp(s32 temp)
+{
+ int new_state = 0;
+ s32 t_avg, t_old;
+
+ /* First check for immediate overtemps */
+ if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) {
+ new_state |= FAILURE_LOW_OVERTEMP;
+ if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
+ " temperature !\n");
+ }
+ if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) {
+ new_state |= FAILURE_HIGH_OVERTEMP;
+ if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Critical overtemp due to"
+ " immediate CPU temperature !\n");
+ }
+
+ /* We calculate a history of max temperatures and use that for the
+ * overtemp management
+ */
+ t_old = cpu_thist[cpu_thist_pt];
+ cpu_thist[cpu_thist_pt] = temp;
+ cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE;
+ cpu_thist_total -= t_old;
+ cpu_thist_total += temp;
+ t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE;
+
+ DBG_LOTS("t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n",
+ FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp));
+
+ /* Now check for average overtemps */
+ if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) {
+ new_state |= FAILURE_LOW_OVERTEMP;
+ if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Overtemp due to average CPU"
+ " temperature !\n");
+ }
+ if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) {
+ new_state |= FAILURE_HIGH_OVERTEMP;
+ if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+ printk(KERN_ERR "windfarm: Critical overtemp due to"
+ " average CPU temperature !\n");
+ }
+
+ /* Now handle overtemp conditions. We don't currently use the windfarm
+ * overtemp handling core as it's not fully suited to the needs of those
+ * new machine. This will be fixed later.
+ */
+ if (new_state) {
+ /* High overtemp -> immediate shutdown */
+ if (new_state & FAILURE_HIGH_OVERTEMP)
+ machine_power_off();
+ if ((failure_state & new_state) != new_state)
+ cpu_max_all_fans();
+ failure_state |= new_state;
+ } else if ((failure_state & FAILURE_LOW_OVERTEMP) &&
+ (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) {
+ printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
+ failure_state &= ~FAILURE_LOW_OVERTEMP;
+ }
+
+ return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP);
+}
+
+static void cpu_fans_tick(void)
+{
+ int err, cpu;
+ s32 greatest_delta = 0;
+ s32 temp, power, t_max = 0;
+ int i, t, target = 0;
+ struct wf_sensor *sr;
+ struct wf_control *ct;
+ struct wf_cpu_pid_state *sp;
+
+ DBG_LOTS(KERN_DEBUG);
+ for (cpu = 0; cpu < nr_cores; ++cpu) {
+ /* Get CPU core temperature */
+ sr = sens_cpu_temp[cpu];
+ err = sr->ops->get_value(sr, &temp);
+ if (err) {
+ DBG("\n");
+ printk(KERN_WARNING "windfarm: CPU %d temperature "
+ "sensor error %d\n", cpu, err);
+ failure_state |= FAILURE_SENSOR;
+ cpu_max_all_fans();
+ return;
+ }
+
+ /* Keep track of highest temp */
+ t_max = max(t_max, temp);
+
+ /* Get CPU power */
+ sr = sens_cpu_power[cpu];
+ err = sr->ops->get_value(sr, &power);
+ if (err) {
+ DBG("\n");
+ printk(KERN_WARNING "windfarm: CPU %d power "
+ "sensor error %d\n", cpu, err);
+ failure_state |= FAILURE_SENSOR;
+ cpu_max_all_fans();
+ return;
+ }
+
+ /* Run PID */
+ sp = &cpu_pid[cpu];
+ t = wf_cpu_pid_run(sp, power, temp);
+
+ if (cpu == 0 || sp->last_delta > greatest_delta) {
+ greatest_delta = sp->last_delta;
+ target = t;
+ }
+ DBG_LOTS("[%d] P=%d.%.3d T=%d.%.3d ",
+ cpu, FIX32TOPRINT(power), FIX32TOPRINT(temp));
+ }
+ DBG_LOTS("fans = %d, t_max = %d.%03d\n", target, FIX32TOPRINT(t_max));
+
+ /* Darwin limits decrease to 20 per iteration */
+ if (target < (cpu_last_target - 20))
+ target = cpu_last_target - 20;
+ cpu_last_target = target;
+ for (cpu = 0; cpu < nr_cores; ++cpu)
+ cpu_pid[cpu].target = target;
+
+ /* Handle possible overtemps */
+ if (cpu_check_overtemp(t_max))
+ return;
+
+ /* Set fans */
+ for (i = 0; i < NR_CPU_FANS; ++i) {
+ ct = cpu_fans[i];
+ if (ct == NULL)
+ continue;
+ err = ct->ops->set_value(ct, target * cpu_fan_scale[i] / 100);
+ if (err) {
+ printk(KERN_WARNING "windfarm: fan %s reports "
+ "error %d\n", ct->name, err);
+ failure_state |= FAILURE_FAN;
+ break;
+ }
+ }
+}
+
+/* Backside/U4 fan */
+static struct wf_pid_param backside_param = {
+ .interval = 5,
+ .history_len = 2,
+ .gd = 48 << 20,
+ .gp = 5 << 20,
+ .gr = 0,
+ .itarget = 64 << 16,
+ .additive = 1,
+};
+
+static void backside_fan_tick(void)
+{
+ s32 temp;
+ int speed;
+ int err;
+
+ if (!backside_fan || !u4_temp)
+ return;
+ if (!backside_tick) {
+ /* first time; initialize things */
+ backside_param.min = backside_fan->ops->get_min(backside_fan);
+ backside_param.max = backside_fan->ops->get_max(backside_fan);
+ wf_pid_init(&backside_pid, &backside_param);
+ backside_tick = 1;
+ }
+ if (--backside_tick > 0)
+ return;
+ backside_tick = backside_pid.param.interval;
+
+ err = u4_temp->ops->get_value(u4_temp, &temp);
+ if (err) {
+ printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
+ err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(backside_fan);
+ return;
+ }
+ speed = wf_pid_run(&backside_pid, temp);
+ DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(temp), speed);
+
+ err = backside_fan->ops->set_value(backside_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+/* Drive bay fan */
+static struct wf_pid_param drive_bay_prm = {
+ .interval = 5,
+ .history_len = 2,
+ .gd = 30 << 20,
+ .gp = 5 << 20,
+ .gr = 0,
+ .itarget = 40 << 16,
+ .additive = 1,
+};
+
+static void drive_bay_fan_tick(void)
+{
+ s32 temp;
+ int speed;
+ int err;
+
+ if (!drive_bay_fan || !hd_temp)
+ return;
+ if (!drive_bay_tick) {
+ /* first time; initialize things */
+ drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
+ drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
+ wf_pid_init(&drive_bay_pid, &drive_bay_prm);
+ drive_bay_tick = 1;
+ }
+ if (--drive_bay_tick > 0)
+ return;
+ drive_bay_tick = drive_bay_pid.param.interval;
+
+ err = hd_temp->ops->get_value(hd_temp, &temp);
+ if (err) {
+ printk(KERN_WARNING "windfarm: drive bay temp sensor "
+ "error %d\n", err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(drive_bay_fan);
+ return;
+ }
+ speed = wf_pid_run(&drive_bay_pid, temp);
+ DBG_LOTS("drive_bay PID temp=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(temp), speed);
+
+ err = drive_bay_fan->ops->set_value(drive_bay_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+/* PCI slots area fan */
+/* This makes the fan speed proportional to the power consumed */
+static struct wf_pid_param slots_param = {
+ .interval = 1,
+ .history_len = 2,
+ .gd = 0,
+ .gp = 0,
+ .gr = 0x1277952,
+ .itarget = 0,
+ .min = 1560,
+ .max = 3510,
+};
+
+static void slots_fan_tick(void)
+{
+ s32 power;
+ int speed;
+ int err;
+
+ if (!slots_fan || !slots_power)
+ return;
+ if (!slots_started) {
+ /* first time; initialize things */
+ wf_pid_init(&slots_pid, &slots_param);
+ slots_started = 1;
+ }
+
+ err = slots_power->ops->get_value(slots_power, &power);
+ if (err) {
+ printk(KERN_WARNING "windfarm: slots power sensor error %d\n",
+ err);
+ failure_state |= FAILURE_SENSOR;
+ wf_control_set_max(slots_fan);
+ return;
+ }
+ speed = wf_pid_run(&slots_pid, power);
+ DBG_LOTS("slots PID power=%d.%.3d speed=%d\n",
+ FIX32TOPRINT(power), speed);
+
+ err = slots_fan->ops->set_value(slots_fan, speed);
+ if (err) {
+ printk(KERN_WARNING "windfarm: slots fan error %d\n", err);
+ failure_state |= FAILURE_FAN;
+ }
+}
+
+static void set_fail_state(void)
+{
+ int i;
+
+ if (cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ for (i = 0; i < NR_CPU_FANS; ++i)
+ if (cpu_fans[i])
+ wf_control_set_max(cpu_fans[i]);
+ if (backside_fan)
+ wf_control_set_max(backside_fan);
+ if (slots_fan)
+ wf_control_set_max(slots_fan);
+ if (drive_bay_fan)
+ wf_control_set_max(drive_bay_fan);
+}
+
+static void pm112_tick(void)
+{
+ int i, last_failure;
+
+ if (!started) {
+ started = 1;
+ for (i = 0; i < nr_cores; ++i) {
+ if (create_cpu_loop(i) < 0) {
+ failure_state = FAILURE_PERM;
+ set_fail_state();
+ break;
+ }
+ }
+ DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));
+
+#ifdef HACKED_OVERTEMP
+ cpu_all_tmax = 60 << 16;
+#endif
+ }
+
+ /* Permanent failure, bail out */
+ if (failure_state & FAILURE_PERM)
+ return;
+ /* Clear all failure bits except low overtemp which will be eventually
+ * cleared by the control loop itself
+ */
+ last_failure = failure_state;
+ failure_state &= FAILURE_LOW_OVERTEMP;
+ cpu_fans_tick();
+ backside_fan_tick();
+ slots_fan_tick();
+ drive_bay_fan_tick();
+
+ DBG_LOTS("last_failure: 0x%x, failure_state: %x\n",
+ last_failure, failure_state);
+
+ /* Check for failures. Any failure causes cpufreq clamping */
+ if (failure_state && last_failure == 0 && cpufreq_clamp)
+ wf_control_set_max(cpufreq_clamp);
+ if (failure_state == 0 && last_failure && cpufreq_clamp)
+ wf_control_set_min(cpufreq_clamp);
+
+ /* That's it for now, we might want to deal with other failures
+ * differently in the future though
+ */
+}
+
+static void pm112_new_control(struct wf_control *ct)
+{
+ int i, max_exhaust;
+
+ if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
+ if (wf_get_control(ct) == 0)
+ cpufreq_clamp = ct;
+ }
+
+ for (i = 0; i < NR_CPU_FANS; ++i) {
+ if (!strcmp(ct->name, cpu_fan_names[i])) {
+ if (cpu_fans[i] == NULL && wf_get_control(ct) == 0)
+ cpu_fans[i] = ct;
+ break;
+ }
+ }
+ if (i >= NR_CPU_FANS) {
+ /* not a CPU fan, try the others */
+ if (!strcmp(ct->name, "backside-fan")) {
+ if (backside_fan == NULL && wf_get_control(ct) == 0)
+ backside_fan = ct;
+ } else if (!strcmp(ct->name, "slots-fan")) {
+ if (slots_fan == NULL && wf_get_control(ct) == 0)
+ slots_fan = ct;
+ } else if (!strcmp(ct->name, "drive-bay-fan")) {
+ if (drive_bay_fan == NULL && wf_get_control(ct) == 0)
+ drive_bay_fan = ct;
+ }
+ return;
+ }
+
+ for (i = 0; i < CPU_FANS_REQD; ++i)
+ if (cpu_fans[i] == NULL)
+ return;
+
+ /* work out pump scaling factors */
+ max_exhaust = cpu_fans[0]->ops->get_max(cpu_fans[0]);
+ for (i = FIRST_PUMP; i <= LAST_PUMP; ++i)
+ if ((ct = cpu_fans[i]) != NULL)
+ cpu_fan_scale[i] =
+ ct->ops->get_max(ct) * 100 / max_exhaust;
+
+ have_all_controls = 1;
+}
+
+static void pm112_new_sensor(struct wf_sensor *sr)
+{
+ unsigned int i;
+
+ if (have_all_sensors)
+ return;
+ if (!strncmp(sr->name, "cpu-temp-", 9)) {
+ i = sr->name[9] - '0';
+ if (sr->name[10] == 0 && i < NR_CORES &&
+ sens_cpu_temp[i] == NULL && wf_get_sensor(sr) == 0)
+ sens_cpu_temp[i] = sr;
+
+ } else if (!strncmp(sr->name, "cpu-power-", 10)) {
+ i = sr->name[10] - '0';
+ if (sr->name[11] == 0 && i < NR_CORES &&
+ sens_cpu_power[i] == NULL && wf_get_sensor(sr) == 0)
+ sens_cpu_power[i] = sr;
+ } else if (!strcmp(sr->name, "hd-temp")) {
+ if (hd_temp == NULL && wf_get_sensor(sr) == 0)
+ hd_temp = sr;
+ } else if (!strcmp(sr->name, "slots-power")) {
+ if (slots_power == NULL && wf_get_sensor(sr) == 0)
+ slots_power = sr;
+ } else if (!strcmp(sr->name, "u4-temp")) {
+ if (u4_temp == NULL && wf_get_sensor(sr) == 0)
+ u4_temp = sr;
+ } else
+ return;
+
+ /* check if we have all the sensors we need */
+ for (i = 0; i < nr_cores; ++i)
+ if (sens_cpu_temp[i] == NULL || sens_cpu_power[i] == NULL)
+ return;
+
+ have_all_sensors = 1;
+}
+
+static int pm112_wf_notify(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch (event) {
+ case WF_EVENT_NEW_SENSOR:
+ pm112_new_sensor(data);
+ break;
+ case WF_EVENT_NEW_CONTROL:
+ pm112_new_control(data);
+ break;
+ case WF_EVENT_TICK:
+ if (have_all_controls && have_all_sensors)
+ pm112_tick();
+ }
+ return 0;
+}
+
+static struct notifier_block pm112_events = {
+ .notifier_call = pm112_wf_notify,
+};
+
+static int wf_pm112_probe(struct device *dev)
+{
+ wf_register_client(&pm112_events);
+ return 0;
+}
+
+static int wf_pm112_remove(struct device *dev)
+{
+ wf_unregister_client(&pm112_events);
+ /* should release all sensors and controls */
+ return 0;
+}
+
+static struct device_driver wf_pm112_driver = {
+ .name = "windfarm",
+ .bus = &platform_bus_type,
+ .probe = wf_pm112_probe,
+ .remove = wf_pm112_remove,
+};
+
+static int __init wf_pm112_init(void)
+{
+ struct device_node *cpu;
+
+ if (!machine_is_compatible("PowerMac11,2"))
+ return -ENODEV;
+
+ /* Count the number of CPU cores */
+ nr_cores = 0;
+ for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; )
+ ++nr_cores;
+
+ printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n");
+ driver_register(&wf_pm112_driver);
+ return 0;
+}
+
+static void __exit wf_pm112_exit(void)
+{
+ driver_unregister(&wf_pm112_driver);
+}
+
+module_init(wf_pm112_init);
+module_exit(wf_pm112_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("Thermal control for PowerMac11,2");
+MODULE_LICENSE("GPL");
}
}
-
-/*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- ssize_t r; \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
- return r; \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- return sprintf(buf, "%d", val); \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(sys_fan, fan_system);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-
/*
* ****** Setup / Init / Misc ... ******
*
return;
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_cpu_main = ct;
- device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
- }
}
if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_system = ct;
- device_create_file(wf_smu_dev, &dev_attr_sys_fan);
- }
}
if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
}
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_hd = ct;
- device_create_file(wf_smu_dev, &dev_attr_hd_fan);
- }
}
if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
return;
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_power);
- }
}
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
- }
}
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_hd_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_hd_temp);
- }
}
if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
* with that except by adding locks all over... I'll do that
* eventually but heh, who ever rmmod this module anyway ?
*/
- if (sensor_cpu_power) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ if (sensor_cpu_power)
wf_put_sensor(sensor_cpu_power);
- }
- if (sensor_cpu_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ if (sensor_cpu_temp)
wf_put_sensor(sensor_cpu_temp);
- }
- if (sensor_hd_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ if (sensor_hd_temp)
wf_put_sensor(sensor_hd_temp);
- }
/* Release all controls */
- if (fan_cpu_main) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ if (fan_cpu_main)
wf_put_control(fan_cpu_main);
- }
- if (fan_hd) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ if (fan_hd)
wf_put_control(fan_hd);
- }
- if (fan_system) {
- device_remove_file(wf_smu_dev, &dev_attr_sys_fan);
+ if (fan_system)
wf_put_control(fan_system);
- }
if (cpufreq_clamp)
wf_put_control(cpufreq_clamp);
}
-/*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- ssize_t r; \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); \
- return r; \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data) \
-static ssize_t show_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- s32 val = 0; \
- data->ops->get_value(data, &val); \
- return sprintf(buf, "%d", val); \
-} \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-BUILD_SHOW_FUNC_INT(slots_fan, fan_slots);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-BUILD_SHOW_FUNC_FIX(slots_power, sensor_slots_power);
-
/*
* ****** Setup / Init / Misc ... ******
*
return;
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-rear-fan-0")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_cpu_main = ct;
- device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
- }
}
if (fan_cpu_second == NULL && !strcmp(ct->name, "cpu-rear-fan-1")) {
}
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_hd = ct;
- device_create_file(wf_smu_dev, &dev_attr_hd_fan);
- }
}
if (fan_slots == NULL && !strcmp(ct->name, "slots-fan")) {
- if (wf_get_control(ct) == 0) {
+ if (wf_get_control(ct) == 0)
fan_slots = ct;
- device_create_file(wf_smu_dev, &dev_attr_slots_fan);
- }
}
if (fan_cpu_main && (fan_cpu_second || fan_cpu_third) && fan_hd &&
return;
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_power);
- }
}
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_cpu_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
- }
}
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_hd_temp = sr;
- device_create_file(wf_smu_dev, &dev_attr_hd_temp);
- }
}
if (sensor_slots_power == NULL && !strcmp(sr->name, "slots-power")) {
- if (wf_get_sensor(sr) == 0) {
+ if (wf_get_sensor(sr) == 0)
sensor_slots_power = sr;
- device_create_file(wf_smu_dev, &dev_attr_slots_power);
- }
}
if (sensor_cpu_power && sensor_cpu_temp &&
* with that except by adding locks all over... I'll do that
* eventually but heh, who ever rmmod this module anyway ?
*/
- if (sensor_cpu_power) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+ if (sensor_cpu_power)
wf_put_sensor(sensor_cpu_power);
- }
- if (sensor_cpu_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+ if (sensor_cpu_temp)
wf_put_sensor(sensor_cpu_temp);
- }
- if (sensor_hd_temp) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+ if (sensor_hd_temp)
wf_put_sensor(sensor_hd_temp);
- }
- if (sensor_slots_power) {
- device_remove_file(wf_smu_dev, &dev_attr_slots_power);
+ if (sensor_slots_power)
wf_put_sensor(sensor_slots_power);
- }
/* Release all controls */
- if (fan_cpu_main) {
- device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+ if (fan_cpu_main)
wf_put_control(fan_cpu_main);
- }
if (fan_cpu_second)
wf_put_control(fan_cpu_second);
if (fan_cpu_third)
wf_put_control(fan_cpu_third);
- if (fan_hd) {
- device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+ if (fan_hd)
wf_put_control(fan_hd);
- }
- if (fan_slots) {
- device_remove_file(wf_smu_dev, &dev_attr_slots_fan);
+ if (fan_slots)
wf_put_control(fan_slots);
- }
if (cpufreq_clamp)
wf_put_control(cpufreq_clamp);
#include "windfarm.h"
-#define VERSION "0.3"
+#define VERSION "0.4"
#undef DEBUG
#define DBG(args...) do { } while(0)
#endif
+static int smu_supports_new_fans_ops = 1;
+
/*
* SMU fans control object
*/
/* Fill SMU command structure */
cmd.cmd = SMU_CMD_FAN_COMMAND;
- cmd.data_len = 14;
+
+ /* The SMU has an "old" and a "new" way of setting the fan speed
+ * Unfortunately, I found no reliable way to know which one works
+ * on a given machine model. After some investigations it appears
+ * that MacOS X just tries the new one, and if it fails fallbacks
+ * to the old ones ... Ugh.
+ */
+ retry:
+ if (smu_supports_new_fans_ops) {
+ buffer[0] = 0x30;
+ buffer[1] = id;
+ *((u16 *)(&buffer[2])) = value;
+ cmd.data_len = 4;
+ } else {
+ if (id > 7)
+ return -EINVAL;
+ /* Fill argument buffer */
+ memset(buffer, 0, 16);
+ buffer[0] = pwm ? 0x10 : 0x00;
+ buffer[1] = 0x01 << id;
+ *((u16 *)&buffer[2 + id * 2]) = value;
+ cmd.data_len = 14;
+ }
+
cmd.reply_len = 16;
cmd.data_buf = cmd.reply_buf = buffer;
cmd.status = 0;
cmd.done = smu_done_complete;
cmd.misc = ∁
- /* Fill argument buffer */
- memset(buffer, 0, 16);
- buffer[0] = pwm ? 0x10 : 0x00;
- buffer[1] = 0x01 << id;
- *((u16 *)&buffer[2 + id * 2]) = value;
-
rc = smu_queue_cmd(&cmd);
if (rc)
return rc;
wait_for_completion(&comp);
+
+ /* Handle fallback (see coment above) */
+ if (cmd.status != 0 && smu_supports_new_fans_ops) {
+ printk(KERN_WARNING "windfarm: SMU failed new fan command "
+ "falling back to old method\n");
+ smu_supports_new_fans_ops = 0;
+ goto retry;
+ }
+
return cmd.status;
}
/* Names used on desktop models */
if (!strcmp(l, "Rear Fan 0") || !strcmp(l, "Rear Fan") ||
- !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan"))
+ !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan") ||
+ !strcmp(l, "CPU A EXHAUST"))
fct->ctrl.name = "cpu-rear-fan-0";
- else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1"))
+ else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1") ||
+ !strcmp(l, "CPU B EXHAUST"))
fct->ctrl.name = "cpu-rear-fan-1";
else if (!strcmp(l, "Front Fan 0") || !strcmp(l, "Front Fan") ||
- !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan"))
+ !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan") ||
+ !strcmp(l, "CPU A INTAKE"))
fct->ctrl.name = "cpu-front-fan-0";
- else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1"))
+ else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1") ||
+ !strcmp(l, "CPU B INTAKE"))
fct->ctrl.name = "cpu-front-fan-1";
- else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan"))
+ else if (!strcmp(l, "CPU A PUMP"))
+ fct->ctrl.name = "cpu-pump-0";
+ else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
+ !strcmp(l, "EXPANSION SLOTS INTAKE"))
fct->ctrl.name = "slots-fan";
- else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay"))
+ else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay") ||
+ !strcmp(l, "DRIVE BAY A INTAKE"))
fct->ctrl.name = "drive-bay-fan";
+ else if (!strcmp(l, "BACKSIDE"))
+ fct->ctrl.name = "backside-fan";
/* Names used on iMac models */
if (!strcmp(l, "System Fan") || !strcmp(l, "System fan"))
/* Look for RPM fans */
for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
- if (!strcmp(fans->name, "rpm-fans"))
+ if (!strcmp(fans->name, "rpm-fans") ||
+ device_is_compatible(fans, "smu-rpm-fans"))
break;
for (fan = NULL;
fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
--- /dev/null
+/*
+ * Windfarm PowerMac thermal control. SMU "satellite" controller sensors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Released under the terms of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/semaphore.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+
+#ifdef DEBUG
+#define DBG(args...) printk(args)
+#else
+#define DBG(args...) do { } while(0)
+#endif
+
+/* If the cache is older than 800ms we'll refetch it */
+#define MAX_AGE msecs_to_jiffies(800)
+
+struct wf_sat {
+ int nr;
+ atomic_t refcnt;
+ struct semaphore mutex;
+ unsigned long last_read; /* jiffies when cache last updated */
+ u8 cache[16];
+ struct i2c_client i2c;
+ struct device_node *node;
+};
+
+static struct wf_sat *sats[2];
+
+struct wf_sat_sensor {
+ int index;
+ int index2; /* used for power sensors */
+ int shift;
+ struct wf_sat *sat;
+ struct wf_sensor sens;
+};
+
+#define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens)
+#define i2c_to_sat(c) container_of(c, struct wf_sat, i2c)
+
+static int wf_sat_attach(struct i2c_adapter *adapter);
+static int wf_sat_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_sat_driver = {
+ .driver = {
+ .name = "wf_smu_sat",
+ },
+ .attach_adapter = wf_sat_attach,
+ .detach_client = wf_sat_detach,
+};
+
+/*
+ * XXX i2c_smbus_read_i2c_block_data doesn't pass the requested
+ * length down to the low-level driver, so we use this, which
+ * works well enough with the SMU i2c driver code...
+ */
+static int sat_read_block(struct i2c_client *client, u8 command,
+ u8 *values, int len)
+{
+ union i2c_smbus_data data;
+ int err;
+
+ data.block[0] = len;
+ err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+ I2C_SMBUS_READ, command, I2C_SMBUS_I2C_BLOCK_DATA,
+ &data);
+ if (!err)
+ memcpy(values, data.block, len);
+ return err;
+}
+
+struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
+ unsigned int *size)
+{
+ struct wf_sat *sat;
+ int err;
+ unsigned int i, len;
+ u8 *buf;
+ u8 data[4];
+
+ /* TODO: Add the resulting partition to the device-tree */
+
+ if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
+ return NULL;
+
+ err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
+ if (err) {
+ printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
+ return NULL;
+ }
+
+ len = i2c_smbus_read_word_data(&sat->i2c, 9);
+ if (len < 0) {
+ printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
+ return NULL;
+ }
+ if (len == 0) {
+ printk(KERN_ERR "smu_sat_get_sdb_part no partition %x\n", id);
+ return NULL;
+ }
+
+ len = le16_to_cpu(len);
+ len = (len + 3) & ~3;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL)
+ return NULL;
+
+ for (i = 0; i < len; i += 4) {
+ err = sat_read_block(&sat->i2c, 0xa, data, 4);
+ if (err) {
+ printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
+ err);
+ goto fail;
+ }
+ buf[i] = data[1];
+ buf[i+1] = data[0];
+ buf[i+2] = data[3];
+ buf[i+3] = data[2];
+ }
+#ifdef DEBUG
+ DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+ for (i = 0; i < len; ++i)
+ DBG(" %x", buf[i]);
+ DBG("\n");
+#endif
+
+ if (size)
+ *size = len;
+ return (struct smu_sdbp_header *) buf;
+
+ fail:
+ kfree(buf);
+ return NULL;
+}
+
+/* refresh the cache */
+static int wf_sat_read_cache(struct wf_sat *sat)
+{
+ int err;
+
+ err = sat_read_block(&sat->i2c, 0x3f, sat->cache, 16);
+ if (err)
+ return err;
+ sat->last_read = jiffies;
+#ifdef LOTSA_DEBUG
+ {
+ int i;
+ DBG(KERN_DEBUG "wf_sat_get: data is");
+ for (i = 0; i < 16; ++i)
+ DBG(" %.2x", sat->cache[i]);
+ DBG("\n");
+ }
+#endif
+ return 0;
+}
+
+static int wf_sat_get(struct wf_sensor *sr, s32 *value)
+{
+ struct wf_sat_sensor *sens = wf_to_sat(sr);
+ struct wf_sat *sat = sens->sat;
+ int i, err;
+ s32 val;
+
+ if (sat->i2c.adapter == NULL)
+ return -ENODEV;
+
+ down(&sat->mutex);
+ if (time_after(jiffies, (sat->last_read + MAX_AGE))) {
+ err = wf_sat_read_cache(sat);
+ if (err)
+ goto fail;
+ }
+
+ i = sens->index * 2;
+ val = ((sat->cache[i] << 8) + sat->cache[i+1]) << sens->shift;
+ if (sens->index2 >= 0) {
+ i = sens->index2 * 2;
+ /* 4.12 * 8.8 -> 12.20; shift right 4 to get 16.16 */
+ val = (val * ((sat->cache[i] << 8) + sat->cache[i+1])) >> 4;
+ }
+
+ *value = val;
+ err = 0;
+
+ fail:
+ up(&sat->mutex);
+ return err;
+}
+
+static void wf_sat_release(struct wf_sensor *sr)
+{
+ struct wf_sat_sensor *sens = wf_to_sat(sr);
+ struct wf_sat *sat = sens->sat;
+
+ if (atomic_dec_and_test(&sat->refcnt)) {
+ if (sat->i2c.adapter) {
+ i2c_detach_client(&sat->i2c);
+ sat->i2c.adapter = NULL;
+ }
+ if (sat->nr >= 0)
+ sats[sat->nr] = NULL;
+ kfree(sat);
+ }
+ kfree(sens);
+}
+
+static struct wf_sensor_ops wf_sat_ops = {
+ .get_value = wf_sat_get,
+ .release = wf_sat_release,
+ .owner = THIS_MODULE,
+};
+
+static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
+{
+ struct wf_sat *sat;
+ struct wf_sat_sensor *sens;
+ u32 *reg;
+ char *loc, *type;
+ u8 addr, chip, core;
+ struct device_node *child;
+ int shift, cpu, index;
+ char *name;
+ int vsens[2], isens[2];
+
+ reg = (u32 *) get_property(dev, "reg", NULL);
+ if (reg == NULL)
+ return;
+ addr = *reg;
+ DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
+
+ sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
+ if (sat == NULL)
+ return;
+ sat->nr = -1;
+ sat->node = of_node_get(dev);
+ atomic_set(&sat->refcnt, 0);
+ init_MUTEX(&sat->mutex);
+ sat->i2c.addr = (addr >> 1) & 0x7f;
+ sat->i2c.adapter = adapter;
+ sat->i2c.driver = &wf_sat_driver;
+ strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
+
+ if (i2c_attach_client(&sat->i2c)) {
+ printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
+ goto fail;
+ }
+
+ vsens[0] = vsens[1] = -1;
+ isens[0] = isens[1] = -1;
+ child = NULL;
+ while ((child = of_get_next_child(dev, child)) != NULL) {
+ reg = (u32 *) get_property(child, "reg", NULL);
+ type = get_property(child, "device_type", NULL);
+ loc = get_property(child, "location", NULL);
+ if (reg == NULL || loc == NULL)
+ continue;
+
+ /* the cooked sensors are between 0x30 and 0x37 */
+ if (*reg < 0x30 || *reg > 0x37)
+ continue;
+ index = *reg - 0x30;
+
+ /* expect location to be CPU [AB][01] ... */
+ if (strncmp(loc, "CPU ", 4) != 0)
+ continue;
+ chip = loc[4] - 'A';
+ core = loc[5] - '0';
+ if (chip > 1 || core > 1) {
+ printk(KERN_ERR "wf_sat_create: don't understand "
+ "location %s for %s\n", loc, child->full_name);
+ continue;
+ }
+ cpu = 2 * chip + core;
+ if (sat->nr < 0)
+ sat->nr = chip;
+ else if (sat->nr != chip) {
+ printk(KERN_ERR "wf_sat_create: can't cope with "
+ "multiple CPU chips on one SAT (%s)\n", loc);
+ continue;
+ }
+
+ if (strcmp(type, "voltage-sensor") == 0) {
+ name = "cpu-voltage";
+ shift = 4;
+ vsens[core] = index;
+ } else if (strcmp(type, "current-sensor") == 0) {
+ name = "cpu-current";
+ shift = 8;
+ isens[core] = index;
+ } else if (strcmp(type, "temp-sensor") == 0) {
+ name = "cpu-temp";
+ shift = 10;
+ } else
+ continue; /* hmmm shouldn't happen */
+
+ /* the +16 is enough for "cpu-voltage-n" */
+ sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+ if (sens == NULL) {
+ printk(KERN_ERR "wf_sat_create: couldn't create "
+ "%s sensor %d (no memory)\n", name, cpu);
+ continue;
+ }
+ sens->index = index;
+ sens->index2 = -1;
+ sens->shift = shift;
+ sens->sat = sat;
+ atomic_inc(&sat->refcnt);
+ sens->sens.ops = &wf_sat_ops;
+ sens->sens.name = (char *) (sens + 1);
+ snprintf(sens->sens.name, 16, "%s-%d", name, cpu);
+
+ if (wf_register_sensor(&sens->sens)) {
+ atomic_dec(&sat->refcnt);
+ kfree(sens);
+ }
+ }
+
+ /* make the power sensors */
+ for (core = 0; core < 2; ++core) {
+ if (vsens[core] < 0 || isens[core] < 0)
+ continue;
+ cpu = 2 * sat->nr + core;
+ sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+ if (sens == NULL) {
+ printk(KERN_ERR "wf_sat_create: couldn't create power "
+ "sensor %d (no memory)\n", cpu);
+ continue;
+ }
+ sens->index = vsens[core];
+ sens->index2 = isens[core];
+ sens->shift = 0;
+ sens->sat = sat;
+ atomic_inc(&sat->refcnt);
+ sens->sens.ops = &wf_sat_ops;
+ sens->sens.name = (char *) (sens + 1);
+ snprintf(sens->sens.name, 16, "cpu-power-%d", cpu);
+
+ if (wf_register_sensor(&sens->sens)) {
+ atomic_dec(&sat->refcnt);
+ kfree(sens);
+ }
+ }
+
+ if (sat->nr >= 0)
+ sats[sat->nr] = sat;
+
+ return;
+
+ fail:
+ kfree(sat);
+}
+
+static int wf_sat_attach(struct i2c_adapter *adapter)
+{
+ struct device_node *busnode, *dev = NULL;
+ struct pmac_i2c_bus *bus;
+
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
+
+ while ((dev = of_get_next_child(busnode, dev)) != NULL)
+ if (device_is_compatible(dev, "smu-sat"))
+ wf_sat_create(adapter, dev);
+ return 0;
+}
+
+static int wf_sat_detach(struct i2c_client *client)
+{
+ struct wf_sat *sat = i2c_to_sat(client);
+
+ /* XXX TODO */
+
+ sat->i2c.adapter = NULL;
+ return 0;
+}
+
+static int __init sat_sensors_init(void)
+{
+ int err;
+
+ err = i2c_add_driver(&wf_sat_driver);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static void __exit sat_sensors_exit(void)
+{
+ i2c_del_driver(&wf_sat_driver);
+}
+
+module_init(sat_sensors_init);
+/*module_exit(sat_sensors_exit); Uncomment when cleanup is implemented */
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("SMU satellite sensors for PowerMac thermal control");
+MODULE_LICENSE("GPL");
!strcmp(l, "CPU T-Diode")) {
ads->sens.ops = &smu_cputemp_ops;
ads->sens.name = "cpu-temp";
+ if (cpudiode == NULL) {
+ DBG("wf: cpudiode partition (%02x) not found\n",
+ SMU_SDB_CPUDIODE_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "current-sensor") &&
!strcmp(l, "CPU Current")) {
ads->sens.ops = &smu_cpuamp_ops;
ads->sens.name = "cpu-current";
+ if (cpuvcp == NULL) {
+ DBG("wf: cpuvcp partition (%02x) not found\n",
+ SMU_SDB_CPUVCP_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "voltage-sensor") &&
!strcmp(l, "CPU Voltage")) {
ads->sens.ops = &smu_cpuvolt_ops;
ads->sens.name = "cpu-voltage";
+ if (cpuvcp == NULL) {
+ DBG("wf: cpuvcp partition (%02x) not found\n",
+ SMU_SDB_CPUVCP_ID);
+ goto fail;
+ }
} else if (!strcmp(c, "power-sensor") &&
!strcmp(l, "Slots Power")) {
ads->sens.ops = &smu_slotspow_ops;
return NULL;
}
-static int smu_fetch_param_partitions(void)
+static void smu_fetch_param_partitions(void)
{
struct smu_sdbp_header *hdr;
/* Get CPU voltage/current/power calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
- if (hdr == NULL) {
- DBG("wf: cpuvcp partition (%02x) not found\n",
- SMU_SDB_CPUVCP_ID);
- return -ENODEV;
+ if (hdr != NULL) {
+ cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
+ /* Keep version around */
+ cpuvcp_version = hdr->version;
}
- cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
- /* Keep version around */
- cpuvcp_version = hdr->version;
/* Get CPU diode calibration data */
hdr = smu_get_sdb_partition(SMU_SDB_CPUDIODE_ID, NULL);
- if (hdr == NULL) {
- DBG("wf: cpudiode partition (%02x) not found\n",
- SMU_SDB_CPUDIODE_ID);
- return -ENODEV;
- }
- cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
+ if (hdr != NULL)
+ cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
/* Get slots power calibration data if any */
hdr = smu_get_sdb_partition(SMU_SDB_SLOTSPOW_ID, NULL);
hdr = smu_get_sdb_partition(SMU_SDB_DEBUG_SWITCHES_ID, NULL);
if (hdr != NULL)
debugswitches = (u8 *)&hdr[1];
-
- return 0;
}
static int __init smu_sensors_init(void)
{
struct device_node *smu, *sensors, *s;
struct smu_ad_sensor *volt_sensor = NULL, *curr_sensor = NULL;
- int rc;
if (!smu_present())
return -ENODEV;
/* Get parameters partitions */
- rc = smu_fetch_param_partitions();
- if (rc)
- return rc;
+ smu_fetch_param_partitions();
smu = of_find_node_by_type(NULL, "smu");
if (smu == NULL)
extern struct smu_sdbp_header *smu_get_sdb_partition(int id,
unsigned int *size);
+/* Get "sdb" partition data from an SMU satellite */
+extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
+ int id, unsigned int *size);
+
+
#endif /* __KERNEL__ */
projects / linux-2.6-omap-h63xx.git / commitdiff