]> pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
ucc_geth: Change uec phy id to the same format as gianfar's
authorHaiying Wang <Haiying.Wang@freescale.com>
Fri, 30 Jan 2009 01:28:04 +0000 (17:28 -0800)
committerDavid S. Miller <davem@davemloft.net>
Fri, 30 Jan 2009 01:28:04 +0000 (17:28 -0800)
The commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert
gianfar to an of_platform_driver") changes the gianfar's phy id to the
format like "mdio@xxxx:xx", but uec still uses the old format like
"xxxxxxxx:xx".  For the board whose UEC uses gianfar-mdio like
MPC8568MDS, the phy can not be attached because of the incompatible
phy id format. This patch changes uec's phy id to the same format as
gianfar's.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ucc_geth.c
drivers/net/ucc_geth.h
drivers/net/ucc_geth_mii.c
drivers/net/ucc_geth_mii.h

index 11441225bf413b8d21ec1835452070d64b26caec..e87986867ba5b3042be2434f5620ca662242c1b8 100644 (file)
@@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev)
 static int init_phy(struct net_device *dev)
 {
        struct ucc_geth_private *priv = netdev_priv(dev);
+       struct device_node *np = priv->node;
+       struct device_node *phy, *mdio;
+       const phandle *ph;
+       char bus_name[MII_BUS_ID_SIZE];
+       const unsigned int *id;
        struct phy_device *phydev;
        char phy_id[BUS_ID_SIZE];
 
@@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev)
        priv->oldspeed = 0;
        priv->oldduplex = -1;
 
-       snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
-                priv->ug_info->phy_address);
+       ph = of_get_property(np, "phy-handle", NULL);
+       phy = of_find_node_by_phandle(*ph);
+       mdio = of_get_parent(phy);
+
+       id = of_get_property(phy, "reg", NULL);
+
+       of_node_put(phy);
+       of_node_put(mdio);
+
+       uec_mdio_bus_name(bus_name, mdio);
+       snprintf(phy_id, sizeof(phy_id), "%s:%02x",
+                                bus_name, *id);
 
        phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
 
@@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
        ugeth->ug_info = ug_info;
        ugeth->dev = dev;
+       ugeth->node = np;
 
        return 0;
 }
index 8f699cb773ee0cbac5c6795dcf83d2acceb6ce64..16cbe42ba43c9b0f8097222306324498da489abe 100644 (file)
@@ -1186,6 +1186,8 @@ struct ucc_geth_private {
        int oldspeed;
        int oldduplex;
        int oldlink;
+
+       struct device_node *node;
 };
 
 void uec_set_ethtool_ops(struct net_device *netdev);
index c001d261366b84c3ffe782b7f2f6d216107b94de..54635911305c2357f66a5705fdb76e0539742876 100644 (file)
@@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma
        if (err)
                goto reg_map_fail;
 
-       snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+       uec_mdio_bus_name(new_bus->id, np);
 
        new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
 
@@ -283,3 +283,13 @@ void uec_mdio_exit(void)
 {
        of_unregister_platform_driver(&uec_mdio_driver);
 }
+
+void uec_mdio_bus_name(char *name, struct device_node *np)
+{
+        const u32 *reg;
+
+        reg = of_get_property(np, "reg", NULL);
+
+        snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
index 1e45b2028a50c7f07d43d955979afd760acf42b4..840cf80235b7a7ab3993e0a07df7481bb1f6c7a9 100644 (file)
@@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
 int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
 int __init uec_mdio_init(void);
 void uec_mdio_exit(void);
+void uec_mdio_bus_name(char *name, struct device_node *np);
 #endif                         /* __UEC_MII_H */