#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/i2o.h>
+#include <linux/scatterlist.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_request.h>
+#include <scsi/sg.h>
+#include <scsi/sg_request.h>
#define OSM_NAME "scsi-osm"
-#define OSM_VERSION "$Rev$"
+#define OSM_VERSION "1.282"
#define OSM_DESCRIPTION "I2O SCSI Peripheral OSM"
static struct i2o_driver i2o_scsi_driver;
-static int i2o_scsi_max_id = 16;
-static int i2o_scsi_max_lun = 8;
+static unsigned int i2o_scsi_max_id = 16;
+static unsigned int i2o_scsi_max_lun = 255;
struct i2o_scsi_host {
struct Scsi_Host *scsi_host; /* pointer to the SCSI host */
struct i2o_controller *iop; /* pointer to the I2O controller */
+ unsigned int lun; /* lun's used for block devices */
struct i2o_device *channel[0]; /* channel->i2o_dev mapping table */
};
u8 type;
int i;
size_t size;
- i2o_status_block *sb;
+ u16 body_size = 6;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+ if (c->adaptec)
+ body_size = 8;
+#endif
list_for_each_entry(i2o_dev, &c->devices, list)
if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
- && (type == 0x01)) /* SCSI bus */
+ && (type == 0x01)) /* SCSI bus */
max_channel++;
}
scsi_host->max_id = i2o_scsi_max_id;
scsi_host->max_lun = i2o_scsi_max_lun;
scsi_host->this_id = c->unit;
-
- sb = c->status_block.virt;
-
- scsi_host->sg_tablesize = (sb->inbound_frame_size -
- sizeof(struct i2o_message) / 4 - 6) / 2;
+ scsi_host->sg_tablesize = i2o_sg_tablesize(c, body_size);
i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata;
i2o_shost->scsi_host = scsi_host;
i2o_shost->iop = c;
+ i2o_shost->lun = 1;
i = 0;
list_for_each_entry(i2o_dev, &c->devices, list)
if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) {
- if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* only SCSI bus */
+ if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1)
+ && (type == 0x01)) /* only SCSI bus */
i2o_shost->channel[i++] = i2o_dev;
if (i >= max_channel)
struct Scsi_Host *scsi_host;
struct i2o_device *parent;
struct scsi_device *scsi_dev;
- u32 id;
- u64 lun;
+ u32 id = -1;
+ u64 lun = -1;
int channel = -1;
int i;
scsi_host = i2o_shost->scsi_host;
- if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0)
+ switch (i2o_dev->lct_data.class_id) {
+ case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+ case I2O_CLASS_EXECUTIVE:
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+ if (c->adaptec) {
+ u8 type;
+ struct i2o_device *d = i2o_shost->channel[0];
+
+ if (i2o_parm_field_get(d, 0x0000, 0, &type, 1)
+ && (type == 0x01)) /* SCSI bus */
+ if (i2o_parm_field_get(d, 0x0200, 4, &id, 4)) {
+ channel = 0;
+ if (i2o_dev->lct_data.class_id ==
+ I2O_CLASS_RANDOM_BLOCK_STORAGE)
+ lun = i2o_shost->lun++;
+ else
+ lun = 0;
+ }
+ }
+#endif
+ break;
+
+ case I2O_CLASS_SCSI_PERIPHERAL:
+ if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4) < 0)
+ return -EFAULT;
+
+ if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8) < 0)
+ return -EFAULT;
+
+ parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
+ if (!parent) {
+ osm_warn("can not find parent of device %03x\n",
+ i2o_dev->lct_data.tid);
+ return -EFAULT;
+ }
+
+ for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
+ if (i2o_shost->channel[i] == parent)
+ channel = i;
+ break;
+
+ default:
+ return -EFAULT;
+ }
+
+ if (channel == -1) {
+ osm_warn("can not find channel of device %03x\n",
+ i2o_dev->lct_data.tid);
return -EFAULT;
+ }
if (id >= scsi_host->max_id) {
osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id,
return -EFAULT;
}
- if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0)
- return -EFAULT;
if (lun >= scsi_host->max_lun) {
osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)",
(unsigned int)lun, scsi_host->max_lun);
return -EFAULT;
}
- parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid);
- if (!parent) {
- osm_warn("can not find parent of device %03x\n",
- i2o_dev->lct_data.tid);
- return -EFAULT;
- }
-
- for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++)
- if (i2o_shost->channel[i] == parent)
- channel = i;
-
- if (channel == -1) {
- osm_warn("can not find channel of device %03x\n",
- i2o_dev->lct_data.tid);
- return -EFAULT;
- }
-
scsi_dev =
__scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev);
return PTR_ERR(scsi_dev);
}
- sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi");
+ sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj,
+ "scsi");
osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n",
i2o_dev->lct_data.tid, channel, id, (unsigned int)lun);
void (*done) (struct scsi_cmnd *))
{
struct i2o_controller *c;
- struct Scsi_Host *host;
struct i2o_device *i2o_dev;
- struct device *dev;
int tid;
struct i2o_message __iomem *msg;
u32 m;
* RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME
*/
u32 scsi_flags = 0x20a00000;
- u32 sg_flags;
+ u32 sgl_offset;
u32 __iomem *mptr;
- u32 __iomem *lenptr;
- u32 len;
- int i;
+ u32 cmd = I2O_CMD_SCSI_EXEC << 24;
+ int rc = 0;
/*
* Do the incoming paperwork
*/
-
i2o_dev = SCpnt->device->hostdata;
- host = SCpnt->device->host;
c = i2o_dev->iop;
- dev = &c->pdev->dev;
SCpnt->scsi_done = done;
osm_warn("no I2O device in request\n");
SCpnt->result = DID_NO_CONNECT << 16;
done(SCpnt);
- return 0;
+ goto exit;
}
tid = i2o_dev->lct_data.tid;
osm_debug("qcmd: Tid = %03x\n", tid);
osm_debug("Real scsi messages.\n");
- /*
- * Obtain an I2O message. If there are none free then
- * throw it back to the scsi layer
- */
-
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return SCSI_MLQUEUE_HOST_BUSY;
-
- mptr = &msg->body[0];
-
/*
* Put together a scsi execscb message
*/
-
switch (SCpnt->sc_data_direction) {
case PCI_DMA_NONE:
/* DATA NO XFER */
- sg_flags = 0x00000000;
+ sgl_offset = SGL_OFFSET_0;
break;
case PCI_DMA_TODEVICE:
/* DATA OUT (iop-->dev) */
scsi_flags |= 0x80000000;
- sg_flags = 0x14000000;
+ sgl_offset = SGL_OFFSET_10;
break;
case PCI_DMA_FROMDEVICE:
/* DATA IN (iop<--dev) */
scsi_flags |= 0x40000000;
- sg_flags = 0x10000000;
+ sgl_offset = SGL_OFFSET_10;
break;
default:
/* Unknown - kill the command */
SCpnt->result = DID_NO_CONNECT << 16;
done(SCpnt);
- return 0;
+ goto exit;
}
- writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]);
+ /*
+ * Obtain an I2O message. If there are none free then
+ * throw it back to the scsi layer
+ */
+
+ m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
+ if (m == I2O_QUEUE_EMPTY) {
+ rc = SCSI_MLQUEUE_HOST_BUSY;
+ goto exit;
+ }
+
+ mptr = &msg->body[0];
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC
+ if (c->adaptec) {
+ u32 adpt_flags = 0;
+
+ if (SCpnt->sc_request && SCpnt->sc_request->upper_private_data) {
+ i2o_sg_io_hdr_t __user *usr_ptr =
+ ((Sg_request *) (SCpnt->sc_request->
+ upper_private_data))->header.
+ usr_ptr;
+
+ if (usr_ptr)
+ get_user(adpt_flags, &usr_ptr->flags);
+ }
+
+ switch (i2o_dev->lct_data.class_id) {
+ case I2O_CLASS_EXECUTIVE:
+ case I2O_CLASS_RANDOM_BLOCK_STORAGE:
+ /* interpret flag has to be set for executive */
+ adpt_flags ^= I2O_DPT_SG_FLAG_INTERPRET;
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * for Adaptec controllers we use the PRIVATE command, because
+ * the normal SCSI EXEC doesn't support all SCSI commands on
+ * all controllers (for example READ CAPACITY).
+ */
+ if (sgl_offset == SGL_OFFSET_10)
+ sgl_offset = SGL_OFFSET_12;
+ cmd = I2O_CMD_PRIVATE << 24;
+ writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++);
+ writel(adpt_flags | tid, mptr++);
+ }
+#endif
+
+ writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]);
writel(i2o_scsi_driver.context, &msg->u.s.icntxt);
/* We want the SCSI control block back */
/* Write SCSI command into the message - always 16 byte block */
memcpy_toio(mptr, SCpnt->cmnd, 16);
mptr += 4;
- lenptr = mptr++; /* Remember me - fill in when we know */
-
- /* Now fill in the SGList and command */
- if (SCpnt->use_sg) {
- struct scatterlist *sg;
- int sg_count;
-
- sg = SCpnt->request_buffer;
- len = 0;
- sg_count = dma_map_sg(dev, sg, SCpnt->use_sg,
- SCpnt->sc_data_direction);
-
- if (unlikely(sg_count <= 0))
- return -ENOMEM;
-
- for (i = SCpnt->use_sg; i > 0; i--) {
- if (i == 1)
- sg_flags |= 0xC0000000;
- writel(sg_flags | sg_dma_len(sg), mptr++);
- writel(sg_dma_address(sg), mptr++);
- len += sg_dma_len(sg);
- sg++;
- }
-
- writel(len, lenptr);
- } else {
- len = SCpnt->request_bufflen;
-
- writel(len, lenptr);
-
- if (len > 0) {
- dma_addr_t dma_addr;
-
- dma_addr = dma_map_single(dev, SCpnt->request_buffer,
- SCpnt->request_bufflen,
- SCpnt->sc_data_direction);
- if (!dma_addr)
- return -ENOMEM;
-
- SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr;
- sg_flags |= 0xC0000000;
- writel(sg_flags | SCpnt->request_bufflen, mptr++);
- writel(dma_addr, mptr++);
+ if (sgl_offset != SGL_OFFSET_0) {
+ /* write size of data addressed by SGL */
+ writel(SCpnt->request_bufflen, mptr++);
+
+ /* Now fill in the SGList and command */
+ if (SCpnt->use_sg) {
+ if (!i2o_dma_map_sg(c, SCpnt->request_buffer,
+ SCpnt->use_sg,
+ SCpnt->sc_data_direction, &mptr))
+ goto nomem;
+ } else {
+ SCpnt->SCp.dma_handle =
+ i2o_dma_map_single(c, SCpnt->request_buffer,
+ SCpnt->request_bufflen,
+ SCpnt->sc_data_direction, &mptr);
+ if (dma_mapping_error(SCpnt->SCp.dma_handle))
+ goto nomem;
}
}
/* Stick the headers on */
- writel((mptr - &msg->u.head[0]) << 16 | SGL_OFFSET_10, &msg->u.head[0]);
+ writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset,
+ &msg->u.head[0]);
/* Queue the message */
i2o_msg_post(c, m);
osm_debug("Issued %ld\n", SCpnt->serial_number);
return 0;
+
+ nomem:
+ rc = -ENOMEM;
+ i2o_msg_nop(c, m);
+
+ exit:
+ return rc;
};
/**
struct pci_dev *pdev; /* PCI device */
- unsigned int short_req:1; /* use small block sizes */
- unsigned int no_quiesce:1; /* dont quiesce before reset */
- unsigned int raptor:1; /* split bar */
unsigned int promise:1; /* Promise controller */
+ unsigned int adaptec:1; /* DPT / Adaptec controller */
+ unsigned int raptor:1; /* split bar */
+ unsigned int no_quiesce:1; /* dont quiesce before reset */
+ unsigned int short_req:1; /* use small block sizes */
+ unsigned int limit_sectors:1; /* limit number of sectors / request */
+ unsigned int pae_support:1; /* controller has 64-bit SGL support */
struct list_head devices; /* list of I2O devices */
struct list_head list; /* Controller list */
static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
size_t len, unsigned int gfp_mask)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int dma_64 = 0;
+
+ if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
+ dma_64 = 1;
+ if(pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+ return -ENOMEM;
+ }
+
addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+
+ if ((sizeof(dma_addr_t) > 4) && dma_64)
+ if(pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+ printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
+
if (!addr->virt)
return -ENOMEM;
#define I2O_CMD_BLOCK_MEJECT 0x43
#define I2O_CMD_BLOCK_POWER 0x70
-#define I2O_PRIVATE_MSG 0xFF
+#define I2O_CMD_PRIVATE 0xFF
/* Command status values */
#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
#define SGL_OFFSET_9 (0x0090 | I2OVERSION)
#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
-
-#define TRL_OFFSET_5 (0x0050 | I2OVERSION)
-#define TRL_OFFSET_6 (0x0060 | I2OVERSION)
+#define SGL_OFFSET_11 (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12 (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION)
/* Transaction Reply Lists (TRL) Control Word structure */
#define TRL_SINGLE_FIXED_LENGTH 0x00
#define HOST_TID 1
#define MSG_FRAME_SIZE 128 /* i2o_scsi assumes >= 32 */
-#define REPLY_FRAME_SIZE 17
#define SG_TABLESIZE 30
#define NMBR_MSG_FRAMES 128
#define I2O_HRT_GET_TRIES 3
#define I2O_LCT_GET_TRIES 3
-/* request queue sizes */
+/* defines for max_sectors and max_phys_segments */
#define I2O_MAX_SECTORS 1024
+#define I2O_MAX_SECTORS_LIMITED 256
#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
-#define I2O_REQ_MEMPOOL_SIZE 32
-
#endif /* __KERNEL__ */
#endif /* _I2O_H */
projects / linux-2.6-omap-h63xx.git / commitdiff