--- /dev/null
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ * Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO13_GPIO,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ return err;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+ if (err)
+ goto pwr_err;
+
+ err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto ro_err;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+ro_err:
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTX_SD_POWER);
+ free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmtx_mci_power,
+ .get_ro = palmtx_mci_get_ro,
+ .init = palmtx_mci_init,
+ .exit = palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmtx_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmtx_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+ .buttons = palmtx_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_BL_POWER);
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTX_MAX_INTENSITY,
+ .dft_brightness = PALMTX_MAX_INTENSITY,
+ .pwm_period_ns = PALMTX_PERIOD_NS,
+ .init = palmtx_backlight_init,
+ .notify = palmtx_backlight_notify,
+ .exit = palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmtx_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+ gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+ udelay(50);
+ gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .udc_command = palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+ .modes = palmtx_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtx_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmtx_pxa_keys,
+#endif
+ &palmtx_backlight,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+ .virtual = PALMTX_PCMCIA_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+ .length = PALMTX_PCMCIA_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+ set_pxa_fb_info(&palmtx_lcd_screen);
+ pxa_set_mci_info(&palmtx_mci_platform_data);
+ pxa_set_udc_info(&palmtx_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmtx_ficp_platform_data);
+ pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+ .phys_io = PALMTX_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = palmtx_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmtx_init
+MACHINE_END
--- /dev/null
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors: Marek Vasut <marek.vasut@gmail.com>
+ * Cristiano P. <cristianop@users.sourceforge.net>
+ * Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET 1
+
+#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N 14
+#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N 13
+#define GPIO_NR_PALMTX_USB_POWER 95
+#define GPIO_NR_PALMTX_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER 84
+#define GPIO_NR_PALMTX_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH 98
+#define GPIO_NR_PALMTX_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER 17
+#define GPIO_NR_PALMTX_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1 94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2 108
+#define GPIO_NR_PALMTX_PCMCIA_RESET 79
+#define GPIO_NR_PALMTX_PCMCIA_READY 116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMTX_PCMCIA_PHYS 0x28000000
+#define PALMTX_PCMCIA_VIRT 0xf0000000
+#define PALMTX_PCMCIA_SIZE 0x100000
+
+#define PALMTX_PHYS_RAM_START 0xa0000000
+#define PALMTX_PHYS_IO_START 0x40000000
+
+#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY 0xFE
+#define PALMTX_DEFAULT_INTENSITY 0x7E
+#define PALMTX_LIMIT_MASK 0x7F
+#define PALMTX_PRESCALER 0x3F
+#define PALMTX_PERIOD_NS 3500
+
+#endif
projects / linux-2.6-omap-h63xx.git / commitdiff