* be guaranteed to be 0 ... mmu_context.h does guarantee this
* by only using 10 bits in the hwcontext value.
*/
-#define CREATE_VPTE_OFFSET1(r1, r2)
+#define CREATE_VPTE_OFFSET1(r1, r2) nop
#define CREATE_VPTE_OFFSET2(r1, r2) \
srax r1, 10, r2
-#define CREATE_VPTE_NOP nop
#else
#define CREATE_VPTE_OFFSET1(r1, r2) \
srax r1, PAGE_SHIFT, r2
#define CREATE_VPTE_OFFSET2(r1, r2) \
sllx r2, 3, r2
-#define CREATE_VPTE_NOP
#endif
/* DTLB ** ICACHE line 1: Quick user TLB misses */
+ mov TLB_SFSR, %g1
ldxa [%g1 + %g1] ASI_DMMU, %g4 ! Get TAG_ACCESS
andcc %g4, TAG_CONTEXT_BITS, %g0 ! From Nucleus?
from_tl1_trap:
be,pn %xcc, kvmap ! Yep, special processing
CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset
cmp %g5, 4 ! Last trap level?
- be,pn %xcc, longpath ! Yep, cannot risk VPTE miss
- nop ! delay slot
/* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses */
+ be,pn %xcc, longpath ! Yep, cannot risk VPTE miss
+ nop ! delay slot
ldxa [%g3 + %g6] ASI_S, %g5 ! Load VPTE
1: brgez,pn %g5, longpath ! Invalid, branch out
nop ! Delay-slot
9: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB
retry ! Trap return
nop
- nop
- nop
/* DTLB ** ICACHE line 3: winfixups+real_faults */
longpath:
nop
nop
nop
- CREATE_VPTE_NOP
+ nop
#undef CREATE_VPTE_OFFSET1
#undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
*/
/* PROT ** ICACHE line 1: User DTLB protection trap */
- stxa %g0, [%g1] ASI_DMMU ! Clear SFSR FaultValid bit
- membar #Sync ! Synchronize ASI stores
- rdpr %pstate, %g5 ! Move into alternate globals
+ mov TLB_SFSR, %g1
+ stxa %g0, [%g1] ASI_DMMU ! Clear FaultValid bit
+ membar #Sync ! Synchronize stores
+ rdpr %pstate, %g5 ! Move into alt-globals
wrpr %g5, PSTATE_AG|PSTATE_MG, %pstate
- rdpr %tl, %g1 ! Need to do a winfixup?
+ rdpr %tl, %g1 ! Need a winfixup?
cmp %g1, 1 ! Trap level >1?
- mov TLB_TAG_ACCESS, %g4 ! Prepare reload of vaddr
- nop
+ mov TLB_TAG_ACCESS, %g4 ! For reload of vaddr
/* PROT ** ICACHE line 2: More real fault processing */
bgu,pn %xcc, winfix_trampoline ! Yes, perform winfixup
#include <asm/mmu.h>
/* This section from from _start to sparc64_boot_end should fit into
- * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
- * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
- * 0x0000.0000.0040.6000 and empty_bad_page, which is from
- * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000.
+ * 0x0000000000404000 to 0x0000000000408000.
*/
-
.text
.globl start, _start, stext, _stext
_start:
start:
_stext:
stext:
-bootup_user_stack:
! 0x0000000000404000
b sparc64_boot
flushw /* Flush register file. */
* former does use this code, the latter does not yet due
* to some complexities. That should be fixed up at some
* point.
+ *
+ * There used to be enormous complexity wrt. transferring
+ * over from the firwmare's trap table to the Linux kernel's.
+ * For example, there was a chicken & egg problem wrt. building
+ * the OBP page tables, yet needing to be on the Linux kernel
+ * trap table (to translate PAGE_OFFSET addresses) in order to
+ * do that.
+ *
+ * We now handle OBP tlb misses differently, via linear lookups
+ * into the prom_trans[] array. So that specific problem no
+ * longer exists. Yet, unfortunately there are still some issues
+ * preventing trampoline.S from using this code... ho hum.
*/
.globl setup_trap_table
setup_trap_table:
save %sp, -192, %sp
- /* Force interrupts to be disabled. Transferring over to
- * the Linux trap table is a very delicate operation.
- * Until we are actually on the Linux trap table, we cannot
- * get the PAGE_OFFSET linear mappings translated. We need
- * that mapping to be setup in order to initialize the firmware
- * page tables.
- *
- * So there is this window of time, from the return from
- * prom_set_trap_table() until inherit_prom_mappings_post()
- * (in arch/sparc64/mm/init.c) completes, during which no
- * firmware address space accesses can be made.
- */
+ /* Force interrupts to be disabled. */
rdpr %pstate, %o1
andn %o1, PSTATE_IE, %o1
wrpr %o1, 0x0, %pstate
wrpr %g0, 15, %pil
- /* Ok, now make the final valid firmware call to jump over
- * to the Linux trap table.
- */
+ /* Make the firmware call to jump over to the Linux trap table. */
call prom_set_trap_table
sethi %hi(sparc64_ttable_tl0), %o0
ret
restore
+sparc64_boot_end:
+
+#include "systbls.S"
+#include "ktlb.S"
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
/*
- * The following skips make sure the trap table in ttable.S is aligned
+ * The following skip makes sure the trap table in ttable.S is aligned
* on a 32K boundary as required by the v9 specs for TBA register.
*/
-sparc64_boot_end:
- .skip 0x2000 + _start - sparc64_boot_end
-bootup_user_stack_end:
- .skip 0x2000
+1:
+ .skip 0x4000 + _start - 1b
#ifdef CONFIG_SBUS
/* This is just a hack to fool make depend config.h discovering
! 0x0000000000408000
#include "ttable.S"
-#include "systbls.S"
-#include "ktlb.S"
-#include "etrap.S"
-#include "rtrap.S"
-#include "winfixup.S"
-#include "entry.S"
-
- /* This is just anal retentiveness on my part... */
- .align 16384
.data
.align 8
*/
#define CREATE_VPTE_OFFSET1(r1, r2) \
srax r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
#else /* PAGE_SHIFT */
#define CREATE_VPTE_OFFSET1(r1, r2) \
srax r1, PAGE_SHIFT, r2
#define CREATE_VPTE_OFFSET2(r1, r2) \
sllx r2, 3, r2
-#define CREATE_VPTE_NOP
#endif /* PAGE_SHIFT */
*/
/* ITLB ** ICACHE line 1: Quick user TLB misses */
+ mov TLB_SFSR, %g1
ldxa [%g1 + %g1] ASI_IMMU, %g4 ! Get TAG_ACCESS
CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset
CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset
1: brgez,pn %g5, 3f ! Not valid, branch out
sethi %hi(_PAGE_EXEC), %g4 ! Delay-slot
andcc %g5, %g4, %g0 ! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults */
be,pn %xcc, 3f ! Nope, branch.
nop ! Delay-slot
2: stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load PTE into TLB
retry ! Trap return
-3: rdpr %pstate, %g4 ! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults */
+3: rdpr %pstate, %g4 ! Move into alt-globals
wrpr %g4, PSTATE_AG|PSTATE_MG, %pstate
rdpr %tpc, %g5 ! And load faulting VA
mov FAULT_CODE_ITLB, %g4 ! It was read from ITLB
-sparc64_realfault_common: ! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults */
+sparc64_realfault_common: ! Called by dtlb_miss
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
ba,pt %xcc, etrap ! Save state
1: rd %pc, %g7 ! ...
- nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups */
call do_sparc64_fault ! Call fault handler
add %sp, PTREGS_OFF, %o0! Compute pt_regs arg
ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state
nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
winfix_trampoline:
rdpr %tpc, %g3 ! Prepare winfixup TNPC
- or %g3, 0x7c, %g3 ! Compute offset to branch
+ or %g3, 0x7c, %g3 ! Compute branch offset
wrpr %g3, %tnpc ! Write it into TNPC
done ! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused... */
nop
nop
nop
nop
- CREATE_VPTE_NOP
#undef CREATE_VPTE_OFFSET1
#undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
done
vpte_insn_obp:
- sethi %hi(prom_pmd_phys), %g5
- ldx [%g5 + %lo(prom_pmd_phys)], %g5
-
/* Behave as if we are at TL0. */
wrpr %g0, 1, %tl
rdpr %tpc, %g4 /* Find original faulting iaddr */
mov TLB_SFSR, %g1
stxa %g4, [%g1 + %g1] ASI_IMMU
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
-
- /* TLB load and return from trap. */
+ sethi %hi(prom_trans), %g5
+ or %g5, %lo(prom_trans), %g5
+
+1: ldx [%g5 + 0x00], %g6 ! base
+ brz,a,pn %g6, longpath ! no more entries, fail
+ mov TLB_SFSR, %g1 ! and restore %g1
+ ldx [%g5 + 0x08], %g1 ! len
+ add %g6, %g1, %g1 ! end
+ cmp %g6, %g4
+ bgu,pt %xcc, 2f
+ cmp %g4, %g1
+ bgeu,pt %xcc, 2f
+ ldx [%g5 + 0x10], %g1 ! PTE
+
+ /* TLB load, restore %g1, and return from trap. */
+ sub %g4, %g6, %g6
+ add %g1, %g6, %g5
+ mov TLB_SFSR, %g1
stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
-kvmap_do_obp:
- sethi %hi(prom_pmd_phys), %g5
- ldx [%g5 + %lo(prom_pmd_phys)], %g5
-
- /* Get PMD offset. */
- srlx %g4, 23, %g6
- and %g6, 0x7ff, %g6
- sllx %g6, 2, %g6
-
- /* Load PMD, is it valid? */
- lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brz,pn %g5, longpath
- sllx %g5, 11, %g5
-
- /* Get PTE offset. */
- srlx %g4, 13, %g6
- and %g6, 0x3ff, %g6
- sllx %g6, 3, %g6
-
- /* Load PTE. */
- ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5
- brgez,pn %g5, longpath
- nop
+2: ba,pt %xcc, 1b
+ add %g5, (3 * 8), %g5 ! next entry
- /* TLB load and return from trap. */
+kvmap_do_obp:
+ sethi %hi(prom_trans), %g5
+ or %g5, %lo(prom_trans), %g5
+ srlx %g4, 13, %g4
+ sllx %g4, 13, %g4
+
+1: ldx [%g5 + 0x00], %g6 ! base
+ brz,a,pn %g6, longpath ! no more entries, fail
+ mov TLB_SFSR, %g1 ! and restore %g1
+ ldx [%g5 + 0x08], %g1 ! len
+ add %g6, %g1, %g1 ! end
+ cmp %g6, %g4
+ bgu,pt %xcc, 2f
+ cmp %g4, %g1
+ bgeu,pt %xcc, 2f
+ ldx [%g5 + 0x10], %g1 ! PTE
+
+ /* TLB load, restore %g1, and return from trap. */
+ sub %g4, %g6, %g6
+ add %g1, %g6, %g5
+ mov TLB_SFSR, %g1
stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
+2: ba,pt %xcc, 1b
+ add %g5, (3 * 8), %g5 ! next entry
+
/*
* On a first level data miss, check whether this is to the OBP range (note
* that such accesses can be made by prom, as well as by kernel using
regs[i].phys_addr = base;
regs[i].reg_size = size;
}
- sort(regs, ents, sizeof(struct linux_prom64_registers),
+ sort(regs, ents, sizeof(struct linux_prom64_registers),
cmp_p64, NULL);
}
unsigned long size;
unsigned long data;
};
-static struct linux_prom_translation prom_trans[512] __initdata;
-static unsigned int prom_trans_ents __initdata;
+
+/* Exported for kernel TLB miss handling in ktlb.S */
+struct linux_prom_translation prom_trans[512] __read_mostly;
+unsigned int prom_trans_ents __read_mostly;
+unsigned int swapper_pgd_zero __read_mostly;
extern unsigned long prom_boot_page;
extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle);
/* Exported for SMP bootup purposes. */
unsigned long kern_locked_tte_data;
-/* Exported for kernel TLB miss handling in ktlb.S */
-unsigned long prom_pmd_phys __read_mostly;
-unsigned int swapper_pgd_zero __read_mostly;
-
-static pmd_t *prompmd __read_mostly;
-
-#define BASE_PAGE_SIZE 8192
-
/*
* Translate PROM's mapping we capture at boot time into physical address.
* The second parameter is only set from prom_callback() invocations.
*/
unsigned long prom_virt_to_phys(unsigned long promva, int *error)
{
- pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff);
- pte_t *ptep;
- unsigned long base;
-
- if (pmd_none(*pmdp)) {
- if (error)
- *error = 1;
- return 0;
- }
- ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff);
- if (!pte_present(*ptep)) {
- if (error)
- *error = 1;
- return 0;
- }
- if (error) {
- *error = 0;
- return pte_val(*ptep);
- }
- base = pte_val(*ptep) & _PAGE_PADDR;
-
- return base + (promva & (BASE_PAGE_SIZE - 1));
-}
+ int i;
-/* The obp translations are saved based on 8k pagesize, since obp can
- * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
- * HI_OBP_ADDRESS range are handled in entry.S and do not use the vpte
- * scheme (also, see rant in inherit_locked_prom_mappings()).
- */
-static void __init build_obp_range(unsigned long start, unsigned long end, unsigned long data)
-{
- unsigned long vaddr;
+ for (i = 0; i < prom_trans_ents; i++) {
+ struct linux_prom_translation *p = &prom_trans[i];
- for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) {
- unsigned long val;
- pmd_t *pmd;
- pte_t *pte;
+ if (promva >= p->virt &&
+ promva < (p->virt + p->size)) {
+ unsigned long base = p->data & _PAGE_PADDR;
- pmd = prompmd + ((vaddr >> 23) & 0x7ff);
- if (pmd_none(*pmd)) {
- pte = __alloc_bootmem(BASE_PAGE_SIZE, BASE_PAGE_SIZE,
- PAGE_SIZE);
- if (!pte)
- prom_halt();
- memset(pte, 0, BASE_PAGE_SIZE);
- pmd_set(pmd, pte);
+ if (error)
+ *error = 0;
+ return base + (promva & (8192 - 1));
}
- pte = (pte_t *) __pmd_page(*pmd) + ((vaddr >> 13) & 0x3ff);
-
- val = data;
-
- /* Clear diag TTE bits. */
- if (tlb_type == spitfire)
- val &= ~0x0003fe0000000000UL;
-
- set_pte_at(&init_mm, vaddr, pte,
- __pte(val | _PAGE_MODIFIED));
-
- data += BASE_PAGE_SIZE;
}
+ if (error)
+ *error = 1;
+ return 0UL;
}
+/* The obp translations are saved based on 8k pagesize, since obp can
+ * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
+ * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte
+ * scheme (also, see rant in inherit_locked_prom_mappings()).
+ */
static inline int in_obp_range(unsigned long vaddr)
{
return (vaddr >= LOW_OBP_ADDRESS &&
vaddr < HI_OBP_ADDRESS);
}
-#define OBP_PMD_SIZE 2048
-static void __init build_obp_pgtable(void)
+static int cmp_ptrans(const void *a, const void *b)
{
- unsigned long i;
-
- prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, PAGE_SIZE);
- if (!prompmd)
- prom_halt();
-
- memset(prompmd, 0, OBP_PMD_SIZE);
-
- prom_pmd_phys = __pa(prompmd);
-
- for (i = 0; i < prom_trans_ents; i++) {
- unsigned long start, end;
-
- if (!in_obp_range(prom_trans[i].virt))
- continue;
+ const struct linux_prom_translation *x = a, *y = b;
- start = prom_trans[i].virt;
- end = start + prom_trans[i].size;
- if (end > HI_OBP_ADDRESS)
- end = HI_OBP_ADDRESS;
-
- build_obp_range(start, end, prom_trans[i].data);
- }
+ if (x->virt > y->virt)
+ return 1;
+ if (x->virt < y->virt)
+ return -1;
+ return 0;
}
-/* Read OBP translations property into 'prom_trans[]'.
- * Return the number of entries.
- */
+/* Read OBP translations property into 'prom_trans[]'. */
static void __init read_obp_translations(void)
{
- int n, node;
+ int n, node, ents, first, last, i;
node = prom_finddevice("/virtual-memory");
n = prom_getproplen(node, "translations");
n = n / sizeof(struct linux_prom_translation);
- prom_trans_ents = n;
+ ents = n;
+
+ sort(prom_trans, ents, sizeof(struct linux_prom_translation),
+ cmp_ptrans, NULL);
+
+ /* Now kick out all the non-OBP entries. */
+ for (i = 0; i < ents; i++) {
+ if (in_obp_range(prom_trans[i].virt))
+ break;
+ }
+ first = i;
+ for (; i < ents; i++) {
+ if (!in_obp_range(prom_trans[i].virt))
+ break;
+ }
+ last = i;
+
+ for (i = 0; i < (last - first); i++) {
+ struct linux_prom_translation *src = &prom_trans[i + first];
+ struct linux_prom_translation *dest = &prom_trans[i];
+
+ *dest = *src;
+ }
+ for (; i < ents; i++) {
+ struct linux_prom_translation *dest = &prom_trans[i];
+ dest->virt = dest->size = dest->data = 0x0UL;
+ }
+
+ prom_trans_ents = last - first;
+
+ if (tlb_type == spitfire) {
+ /* Clear diag TTE bits. */
+ for (i = 0; i < prom_trans_ents; i++)
+ prom_trans[i].data &= ~0x0003fe0000000000UL;
+ }
}
static void __init remap_kernel(void)
}
-static void __init inherit_prom_mappings_pre(void)
+static void __init inherit_prom_mappings(void)
{
read_obp_translations();
/* Now fixup OBP's idea about where we really are mapped. */
prom_printf("Remapping the kernel... ");
remap_kernel();
-
prom_printf("done.\n");
-}
-static void __init inherit_prom_mappings_post(void)
-{
- build_obp_pgtable();
+ prom_printf("Registering callbacks... ");
register_prom_callbacks();
+ prom_printf("done.\n");
}
/* The OBP specifications for sun4u mark 0xfffffffc00000000 and
swapper_pgd_zero = pgd_val(swapper_pg_dir[0]);
- inherit_prom_mappings_pre();
+ inherit_prom_mappings();
/* Ok, we can use our TLB miss and window trap handlers safely.
* We need to do a quick peek here to see if we are on StarFire
extern void setup_tba(int);
setup_tba(this_is_starfire);
}
- __flush_tlb_all();
- /* Everything from this point forward, until we are done with
- * inherit_prom_mappings_post(), must complete successfully
- * without calling into the firmware. The firwmare page tables
- * have not been built, but we are running on the Linux kernel's
- * trap table.
- */
+ inherit_locked_prom_mappings(1);
+
+ __flush_tlb_all();
/* Setup bootmem... */
pages_avail = 0;
last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
- inherit_prom_mappings_post();
-
- inherit_locked_prom_mappings(1);
-
#ifdef CONFIG_DEBUG_PAGEALLOC
kernel_physical_mapping_init();
#endif
projects / linux-2.6-omap-h63xx.git / commitdiff