struct scsi_cmnd *cmd;
struct SGentry *segment_x; /* Linear array of hw sg entries (up to 64 entries) */
- u32 sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */
+ dma_addr_t sg_bus_addr; /* Bus address of sg list (ie, of segment_x) */
u8 sg_count; /* No of HW sg entries for this request */
u8 sg_index; /* Index of HW sg entry for this request */
- u32 total_xfer_length; /* Total number of bytes remaining to be transfered */
- unsigned char *virt_addr; /* Virtual address of current transfer position */
-
+ size_t total_xfer_length; /* Total number of bytes remaining to be transfered */
+ size_t request_length; /* Total number of bytes in this request */
/*
* The sense buffer handling function, request_sense, uses
* the first hw sg entry (segment_x[0]) and the transfer
* total_xfer_length in xferred. These values are restored in
* pci_unmap_srb_sense. This is the only place xferred is used.
*/
- unsigned char *virt_addr_req; /* Saved virtual address of the request buffer */
- u32 xferred; /* Saved copy of total_xfer_length */
+ size_t xferred; /* Saved copy of total_xfer_length */
u16 state;
}
}
-static inline void pio_trigger(void)
-{
- static int feedback_requested;
-
- if (!feedback_requested) {
- feedback_requested = 1;
- printk(KERN_WARNING "%s: Please, contact <linux-scsi@vger.kernel.org> "
- "to help improve support for your system.\n", __FILE__);
- }
-}
-
/* Prepare SRB for being sent to Device DCB w/ command *cmd */
static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
srb->sg_count = 0;
srb->total_xfer_length = 0;
srb->sg_bus_addr = 0;
- srb->virt_addr = NULL;
srb->sg_index = 0;
srb->adapter_status = 0;
srb->target_status = 0;
reqlen, cmd->request_buffer, cmd->use_sg,
srb->sg_count);
- srb->virt_addr = page_address(sl->page);
for (i = 0; i < srb->sg_count; i++) {
u32 busaddr = (u32)sg_dma_address(&sl[i]);
u32 seglen = (u32)sl[i].length;
srb->total_xfer_length++;
srb->segment_x[0].length = srb->total_xfer_length;
- srb->virt_addr = cmd->request_buffer;
+
dprintkdbg(DBG_0,
"build_srb: [1] len=%d buf=%p use_sg=%d map=%08x\n",
srb->total_xfer_length, cmd->request_buffer,
cmd->use_sg, srb->segment_x[0].address);
}
+
+ srb->request_length = srb->total_xfer_length;
}
}
srb = find_cmd(cmd, &dcb->srb_going_list);
if (srb) {
- dprintkl(KERN_DEBUG, "eh_abort: Command in progress");
+ dprintkl(KERN_DEBUG, "eh_abort: Command in progress\n");
/* XXX: Should abort the command here */
} else {
- dprintkl(KERN_DEBUG, "eh_abort: Command not found");
+ dprintkl(KERN_DEBUG, "eh_abort: Command not found\n");
}
return FAILED;
}
/*
* Compute the next Scatter Gather list index and adjust its length
- * and address if necessary; also compute virt_addr
+ * and address if necessary
*/
static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
{
u8 idx;
- struct scatterlist *sg;
- struct scsi_cmnd *cmd = srb->cmd;
- int segment = cmd->use_sg;
u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
struct SGentry *psge = srb->segment_x + srb->sg_index;
psge++;
}
sg_verify_length(srb);
-
- /* we need the corresponding virtual address */
- if (!segment || (srb->flag & AUTO_REQSENSE)) {
- srb->virt_addr += xferred;
- return;
- }
-
- /* We have to walk the scatterlist to find it */
- sg = (struct scatterlist *)cmd->request_buffer;
- while (segment--) {
- unsigned long mask =
- ~((unsigned long)sg->length - 1) & PAGE_MASK;
- if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
- srb->virt_addr = (page_address(sg->page)
- + psge->address -
- (psge->address & PAGE_MASK));
- return;
- }
- ++sg;
- }
-
- dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
- srb->virt_addr = NULL;
}
*/
static void sg_subtract_one(struct ScsiReqBlk *srb)
{
- srb->total_xfer_length--;
- srb->segment_x[srb->sg_index].length--;
- if (srb->total_xfer_length &&
- !srb->segment_x[srb->sg_index].length) {
- if (debug_enabled(DBG_PIO))
- printk(" (next segment)");
- srb->sg_index++;
- sg_update_list(srb, srb->total_xfer_length);
- }
+ sg_update_list(srb, srb->total_xfer_length - 1);
}
* If we need more data, the DMA SG list will be freshly set up, anyway
*/
dprintkdbg(DBG_PIO, "data_out_phase0: "
- "DMA{fifcnt=0x%02x fifostat=0x%02x} "
+ "DMA{fifocnt=0x%02x fifostat=0x%02x} "
"SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n",
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
data_io_transfer(acb, srb, XFERDATAOUT);
}
-
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
u16 scsi_status = *pscsi_status;
- u32 d_left_counter = 0;
+
dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
* seem to be a bad idea, actually.
*/
if (!(srb->state & SRB_XFERPAD)) {
+ u32 d_left_counter;
+ unsigned int sc, fc;
+
if (scsi_status & PARITYERROR) {
dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
"Parity Error\n", srb->cmd->pid);
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT));
}
/* Now: Check remainig data: The SCSI counters should tell us ... */
- d_left_counter = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER)
- + ((DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f)
+ sc = DC395x_read32(acb, TRM_S1040_SCSI_COUNTER);
+ fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
+ d_left_counter = sc + ((fc & 0x1f)
<< ((srb->dcb->sync_period & WIDE_SYNC) ? 1 :
0));
dprintkdbg(DBG_KG, "data_in_phase0: "
"SCSI{fifocnt=0x%02x%s ctr=0x%08x} "
"DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} "
"Remain{totxfer=%i scsi_fifo+ctr=%i}\n",
- DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
+ fc,
(srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
- DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
- DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
+ sc,
+ fc,
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
srb->total_xfer_length, d_left_counter);
/* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
if (d_left_counter
&& srb->total_xfer_length <= DC395x_LASTPIO) {
+ size_t left_io = srb->total_xfer_length;
+
/*u32 addr = (srb->segment_x[srb->sg_index].address); */
/*sg_update_list (srb, d_left_counter); */
- dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) to "
- "%p for remaining %i bytes:",
- DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f,
+ dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) "
+ "for remaining %i bytes:",
+ fc & 0x1f,
(srb->dcb->sync_period & WIDE_SYNC) ?
"words" : "bytes",
- srb->virt_addr,
srb->total_xfer_length);
if (srb->dcb->sync_period & WIDE_SYNC)
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
CFG2_WIDEFIFO);
- while (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) != 0x40) {
- u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
- pio_trigger();
- *(srb->virt_addr)++ = byte;
- if (debug_enabled(DBG_PIO))
- printk(" %02x", byte);
- d_left_counter--;
- sg_subtract_one(srb);
- }
- if (srb->dcb->sync_period & WIDE_SYNC) {
-#if 1
- /* Read the last byte ... */
- if (srb->total_xfer_length > 0) {
- u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
- pio_trigger();
- *(srb->virt_addr)++ = byte;
- srb->total_xfer_length--;
+ while (left_io) {
+ unsigned char *virt, *base = NULL;
+ unsigned long flags = 0;
+ size_t len = left_io;
+
+ if (srb->cmd->use_sg) {
+ size_t offset = srb->request_length - left_io;
+ local_irq_save(flags);
+ /* Assumption: it's inside one page as it's at most 4 bytes and
+ I just assume it's on a 4-byte boundary */
+ base = scsi_kmap_atomic_sg((struct scatterlist *)srb->cmd->request_buffer,
+ srb->sg_count, &offset, &len);
+ virt = base + offset;
+ } else {
+ virt = srb->cmd->request_buffer + srb->cmd->request_bufflen - left_io;
+ len = left_io;
+ }
+ left_io -= len;
+
+ while (len) {
+ u8 byte;
+ byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+ *virt++ = byte;
+
if (debug_enabled(DBG_PIO))
printk(" %02x", byte);
+
+ d_left_counter--;
+ sg_subtract_one(srb);
+
+ len--;
+
+ fc = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
+
+ if (fc == 0x40) {
+ left_io = 0;
+ break;
+ }
+ }
+
+ WARN_ON((fc != 0x40) == !d_left_counter);
+
+ if (fc == 0x40 && (srb->dcb->sync_period & WIDE_SYNC)) {
+ /* Read the last byte ... */
+ if (srb->total_xfer_length > 0) {
+ u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+
+ *virt++ = byte;
+ srb->total_xfer_length--;
+ if (debug_enabled(DBG_PIO))
+ printk(" %02x", byte);
+ }
+
+ DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
+ }
+
+ if (srb->cmd->use_sg) {
+ scsi_kunmap_atomic_sg(base);
+ local_irq_restore(flags);
}
-#endif
- DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2, 0);
}
/*printk(" %08x", *(u32*)(bus_to_virt (addr))); */
/*srb->total_xfer_length = 0; */
SCMD_FIFO_IN);
} else { /* write */
int ln = srb->total_xfer_length;
+ size_t left_io = srb->total_xfer_length;
+
if (srb->dcb->sync_period & WIDE_SYNC)
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
CFG2_WIDEFIFO);
- dprintkdbg(DBG_PIO,
- "data_io_transfer: PIO %i bytes from %p:",
- srb->total_xfer_length, srb->virt_addr);
- while (srb->total_xfer_length) {
- if (debug_enabled(DBG_PIO))
- printk(" %02x", (unsigned char) *(srb->virt_addr));
+ while (left_io) {
+ unsigned char *virt, *base = NULL;
+ unsigned long flags = 0;
+ size_t len = left_io;
+
+ if (srb->cmd->use_sg) {
+ size_t offset = srb->request_length - left_io;
+ local_irq_save(flags);
+ /* Again, max 4 bytes */
+ base = scsi_kmap_atomic_sg((struct scatterlist *)srb->cmd->request_buffer,
+ srb->sg_count, &offset, &len);
+ virt = base + offset;
+ } else {
+ virt = srb->cmd->request_buffer + srb->cmd->request_bufflen - left_io;
+ len = left_io;
+ }
+ left_io -= len;
+
+ while (len--) {
+ if (debug_enabled(DBG_PIO))
+ printk(" %02x", *virt);
- pio_trigger();
- DC395x_write8(acb, TRM_S1040_SCSI_FIFO,
- *(srb->virt_addr)++);
+ DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *virt++);
- sg_subtract_one(srb);
+ sg_subtract_one(srb);
+ }
+
+ if (srb->cmd->use_sg) {
+ scsi_kunmap_atomic_sg(base);
+ local_irq_restore(flags);
+ }
}
if (srb->dcb->sync_period & WIDE_SYNC) {
if (ln % 2) {
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
srb->segment_x[0].length =
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].length;
- srb->virt_addr = srb->virt_addr_req;
}
srb->xferred = srb->total_xfer_length;
/* srb->segment_x : a one entry of S/G list table */
srb->total_xfer_length = sizeof(cmd->sense_buffer);
- srb->virt_addr_req = srb->virt_addr;
- srb->virt_addr = cmd->sense_buffer;
srb->segment_x[0].length = sizeof(cmd->sense_buffer);
/* Map sense buffer */
srb->segment_x[0].address =
projects / linux-2.6-omap-h63xx.git / commitdiff