TWL4030: move TWL module register defs into separate include files

twl_init_irq() uses "magic numbers" to access TWL module IMR and ISR
registers.  Symbolic constants are definitely preferred.

Rather than duplicating already existing symbolic constants in
twl4030-gpio.c and twl4030-pwrirq.c, move the existing constants out
into include files.  This patch should not change kernel behavior.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/i2c/chips/twl4030-gpio.c b/drivers/i2c/chips/twl4030-gpio.c
index f16a48ba5439be5888bb6374681f75f92763b31b..9d17f4574fd72a9b890dafd1a9f23edbc7a3fae3 100644 (file)
--- a/drivers/i2c/chips/twl4030-gpio.c
+++ b/drivers/i2c/chips/twl4030-gpio.c
@@ -38,6 +38,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl4030-gpio.h>
 #include <linux/slab.h>
 
 #include <asm/arch/irqs.h>
@@ -47,53 +48,6 @@
 
 #include <linux/device.h>
 
-/*
- * GPIO Block Register definitions
- */
-
-#define REG_GPIODATAIN1                        0x0
-#define REG_GPIODATAIN2                        0x1
-#define REG_GPIODATAIN3                        0x2
-#define REG_GPIODATADIR1               0x3
-#define REG_GPIODATADIR2               0x4
-#define REG_GPIODATADIR3               0x5
-#define REG_GPIODATAOUT1               0x6
-#define REG_GPIODATAOUT2               0x7
-#define REG_GPIODATAOUT3               0x8
-#define REG_CLEARGPIODATAOUT1          0x9
-#define REG_CLEARGPIODATAOUT2          0xA
-#define REG_CLEARGPIODATAOUT3          0xB
-#define REG_SETGPIODATAOUT1            0xC
-#define REG_SETGPIODATAOUT2            0xD
-#define REG_SETGPIODATAOUT3            0xE
-#define REG_GPIO_DEBEN1                        0xF
-#define REG_GPIO_DEBEN2                        0x10
-#define REG_GPIO_DEBEN3                        0x11
-#define REG_GPIO_CTRL                  0x12
-#define REG_GPIOPUPDCTR1               0x13
-#define REG_GPIOPUPDCTR2               0x14
-#define REG_GPIOPUPDCTR3               0x15
-#define REG_GPIOPUPDCTR4               0x16
-#define REG_GPIOPUPDCTR5               0x17
-#define REG_GPIO_ISR1A                 0x19
-#define REG_GPIO_ISR2A                 0x1A
-#define REG_GPIO_ISR3A                 0x1B
-#define REG_GPIO_IMR1A                 0x1C
-#define REG_GPIO_IMR2A                 0x1D
-#define REG_GPIO_IMR3A                 0x1E
-#define REG_GPIO_ISR1B                 0x1F
-#define REG_GPIO_ISR2B                 0x20
-#define REG_GPIO_ISR3B                 0x21
-#define REG_GPIO_IMR1B                 0x22
-#define REG_GPIO_IMR2B                 0x23
-#define REG_GPIO_IMR3B                 0x24
-#define REG_GPIO_EDR1                  0x28
-#define REG_GPIO_EDR2                  0x29
-#define REG_GPIO_EDR3                  0x2A
-#define REG_GPIO_EDR4                  0x2B
-#define REG_GPIO_EDR5                  0x2C
-#define REG_GPIO_SIH_CTRL              0x2D
-
 /* BitField Definitions */
 
 /* Data banks : 3 banks for 8 gpios each */

diff --git a/drivers/i2c/chips/twl4030-pwrirq.c b/drivers/i2c/chips/twl4030-pwrirq.c
index a4d2e9243b9c50c308b15537b43d1242d5836383..1afdb651b66a24f070a62aa13a230b7a46df9f12 100644 (file)
--- a/drivers/i2c/chips/twl4030-pwrirq.c
+++ b/drivers/i2c/chips/twl4030-pwrirq.c
@@ -27,10 +27,8 @@
 #include <linux/random.h>
 #include <linux/kthread.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl4030-pwrirq.h>
 
-#define PWR_ISR1 0
-#define PWR_IMR1 1
-#define PWR_SIH_CTRL 7
 #define PWR_SIH_CTRL_COR (1<<2)
 
 static u8 twl4030_pwrirq_mask;
@@ -93,7 +91,8 @@ static void do_twl4030_pwrmodule_irq(unsigned int irq, irq_desc_t *desc)
                        twl4030_pwrirq_mask |= 1 << (irq - TWL4030_PWR_IRQ_BASE);
                        local_irq_enable();
                        twl4030_i2c_write_u8(TWL4030_MODULE_INT,
-                                               twl4030_pwrirq_mask, PWR_IMR1);
+                                            twl4030_pwrirq_mask,
+                                            TWL4030_INT_PWR_IMR1);
                }
        }
 }
@@ -115,7 +114,7 @@ static void do_twl4030_pwrirq(unsigned int irq, irq_desc_t *desc)
 
                local_irq_enable();
                ret = twl4030_i2c_read_u8(TWL4030_MODULE_INT, &pwr_isr,
-                                               PWR_ISR1);
+                                         TWL4030_INT_PWR_ISR1);
                if (ret) {
                        printk(KERN_WARNING
                                "I2C error %d while reading TWL4030"
@@ -151,7 +150,7 @@ static int twl4030_pwrirq_thread(void *data)
                twl4030_pwrirq_mask &= ~local_unmask;
 
                twl4030_i2c_write_u8(TWL4030_MODULE_INT, twl4030_pwrirq_mask,
-                                       PWR_IMR1);
+                                    TWL4030_INT_PWR_IMR1);
 
                local_irq_disable();
                if (!twl4030_pwrirq_pending_unmask)
@@ -172,14 +171,14 @@ static int __init twl4030_pwrirq_init(void)
        twl4030_pwrirq_pending_unmask = 0;
 
        err = twl4030_i2c_write_u8(TWL4030_MODULE_INT, twl4030_pwrirq_mask,
-                                       PWR_IMR1);
+                                       TWL4030_INT_PWR_IMR1);
        if (err)
                return err;
 
        /* Enable clear on read */
 
        err = twl4030_i2c_write_u8(TWL4030_MODULE_INT, PWR_SIH_CTRL_COR,
-                                       PWR_SIH_CTRL);
+                                  TWL4030_INT_PWR_SIH_CTRL);
        if (err)
                return err;
 

diff --git a/include/linux/i2c/twl4030-gpio.h b/include/linux/i2c/twl4030-gpio.h
new file mode 100644 (file)
index 0000000..7cbf610
--- /dev/null
+++ b/include/linux/i2c/twl4030-gpio.h
@@ -0,0 +1,76 @@
+/*
+ * twl4030-gpio.h - header for TWL4030 GPIO module
+ *
+ * Copyright (C) 2005-2006, 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_GPIO_H_
+#define __TWL4030_GPIO_H_
+
+/*
+ * GPIO Block Register definitions
+ */
+
+#define REG_GPIODATAIN1                        0x0
+#define REG_GPIODATAIN2                        0x1
+#define REG_GPIODATAIN3                        0x2
+#define REG_GPIODATADIR1               0x3
+#define REG_GPIODATADIR2               0x4
+#define REG_GPIODATADIR3               0x5
+#define REG_GPIODATAOUT1               0x6
+#define REG_GPIODATAOUT2               0x7
+#define REG_GPIODATAOUT3               0x8
+#define REG_CLEARGPIODATAOUT1          0x9
+#define REG_CLEARGPIODATAOUT2          0xA
+#define REG_CLEARGPIODATAOUT3          0xB
+#define REG_SETGPIODATAOUT1            0xC
+#define REG_SETGPIODATAOUT2            0xD
+#define REG_SETGPIODATAOUT3            0xE
+#define REG_GPIO_DEBEN1                        0xF
+#define REG_GPIO_DEBEN2                        0x10
+#define REG_GPIO_DEBEN3                        0x11
+#define REG_GPIO_CTRL                  0x12
+#define REG_GPIOPUPDCTR1               0x13
+#define REG_GPIOPUPDCTR2               0x14
+#define REG_GPIOPUPDCTR3               0x15
+#define REG_GPIOPUPDCTR4               0x16
+#define REG_GPIOPUPDCTR5               0x17
+#define REG_GPIO_ISR1A                 0x19
+#define REG_GPIO_ISR2A                 0x1A
+#define REG_GPIO_ISR3A                 0x1B
+#define REG_GPIO_IMR1A                 0x1C
+#define REG_GPIO_IMR2A                 0x1D
+#define REG_GPIO_IMR3A                 0x1E
+#define REG_GPIO_ISR1B                 0x1F
+#define REG_GPIO_ISR2B                 0x20
+#define REG_GPIO_ISR3B                 0x21
+#define REG_GPIO_IMR1B                 0x22
+#define REG_GPIO_IMR2B                 0x23
+#define REG_GPIO_IMR3B                 0x24
+#define REG_GPIO_EDR1                  0x28
+#define REG_GPIO_EDR2                  0x29
+#define REG_GPIO_EDR3                  0x2A
+#define REG_GPIO_EDR4                  0x2B
+#define REG_GPIO_EDR5                  0x2C
+#define REG_GPIO_SIH_CTRL              0x2D
+
+#endif /* End of __TWL4030_GPIO_H */

diff --git a/include/linux/i2c/twl4030-pwrirq.h b/include/linux/i2c/twl4030-pwrirq.h
new file mode 100644 (file)
index 0000000..7a13368
--- /dev/null
+++ b/include/linux/i2c/twl4030-pwrirq.h
@@ -0,0 +1,37 @@
+/*
+ * twl4030-gpio.h - header for TWL4030 GPIO module
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_PWRIRQ_H_
+#define __TWL4030_PWRIRQ_H_
+
+/*
+ * INT Module Register definitions
+ * (not all registers are defined below)
+ */
+
+#define TWL4030_INT_PWR_ISR1           0x0
+#define TWL4030_INT_PWR_IMR1           0x1
+#define TWL4030_INT_PWR_ISR2           0x2
+#define TWL4030_INT_PWR_IMR2           0x3
+#define TWL4030_INT_PWR_SIH_CTRL       0x7
+
+#endif /* End of __TWL4030_PWRIRQ_H */