m68knommu: fix 5249 ColdFire UART setup

The ICR registers of the 5249 ColdFire processor are 8bits, not 32bits.
Fix the read/write of these register to be the correct size.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 9c926dedb7c2f7ca454986716de582eb405975c9..3b808c64e67112533346b9b9be2cdab85628c26b 100644 (file)
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -51,11 +51,11 @@ static struct platform_device *m5249_devices[] __initdata = {
 static void __init m5249_uart_init_line(int line, int irq)
 {
        if (line == 0) {
-               writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+               writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
                writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
                mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
        } else if (line == 1) {
-               writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+               writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
                writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
                mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
        }