return ret_val;
 }
 
-/**
- *  igb_translate_register_82576 - Translate the proper register offset
- *  @reg: e1000 register to be read
- *
- *  Registers in 82576 are located in different offsets than other adapters
- *  even though they function in the same manner.  This function takes in
- *  the name of the register to read and returns the correct offset for
- *  82576 silicon.
- **/
-u32 igb_translate_register_82576(u32 reg)
-{
-       /*
-        * Some of the 82576 registers are located at different
-        * offsets than they are in older adapters.
-        * Despite the difference in location, the registers
-        * function in the same manner.
-        */
-       switch (reg) {
-       case E1000_TDBAL(0):
-               reg = 0x0E000;
-               break;
-       case E1000_TDBAH(0):
-               reg = 0x0E004;
-               break;
-       case E1000_TDLEN(0):
-               reg = 0x0E008;
-               break;
-       case E1000_TDH(0):
-               reg = 0x0E010;
-               break;
-       case E1000_TDT(0):
-               reg = 0x0E018;
-               break;
-       case E1000_TXDCTL(0):
-               reg = 0x0E028;
-               break;
-       case E1000_RDBAL(0):
-               reg = 0x0C000;
-               break;
-       case E1000_RDBAH(0):
-               reg = 0x0C004;
-               break;
-       case E1000_RDLEN(0):
-               reg = 0x0C008;
-               break;
-       case E1000_RDH(0):
-               reg = 0x0C010;
-               break;
-       case E1000_RDT(0):
-               reg = 0x0C018;
-               break;
-       case E1000_RXDCTL(0):
-               reg = 0x0C028;
-               break;
-       case E1000_SRRCTL(0):
-               reg = 0x0C00C;
-               break;
-       default:
-               break;
-       }
-
-       return reg;
-}
-
 /**
  *  igb_reset_init_script_82575 - Inits HW defaults after reset
  *  @hw: pointer to the HW structure
 
        wrfl();
 }
 
-/**
- *  igb_init_rx_addrs - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setups the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
-       u32 i;
-
-       /* Setup the receive address */
-       hw_dbg("Programming MAC Address into RAR[0]\n");
-
-       hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
-       /* Zero out the other (rar_entry_count - 1) receive addresses */
-       hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
-       for (i = 1; i < rar_count; i++) {
-               array_wr32(E1000_RA, (i << 1), 0);
-               wrfl();
-               array_wr32(E1000_RA, ((i << 1) + 1), 0);
-               wrfl();
-       }
-}
-
 /**
  *  igb_check_alt_mac_addr - Check for alternate MAC addr
  *  @hw: pointer to the HW structure
        wrfl();
 }
 
-/**
- *  igb_update_mc_addr_list - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *  @rar_used_count: the first RAR register free to program
- *  @rar_count: total number of supported Receive Address Registers
- *
- *  Updates the Receive Address Registers and Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- *  The parameter rar_count will usually be hw->mac.rar_entry_count
- *  unless there are workarounds that change this.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-                              u8 *mc_addr_list, u32 mc_addr_count,
-                              u32 rar_used_count, u32 rar_count)
-{
-       u32 hash_value;
-       u32 i;
-
-       /*
-        * Load the first set of multicast addresses into the exact
-        * filters (RAR).  If there are not enough to fill the RAR
-        * array, clear the filters.
-        */
-       for (i = rar_used_count; i < rar_count; i++) {
-               if (mc_addr_count) {
-                       hw->mac.ops.rar_set(hw, mc_addr_list, i);
-                       mc_addr_count--;
-                       mc_addr_list += ETH_ALEN;
-               } else {
-                       array_wr32(E1000_RA, i << 1, 0);
-                       wrfl();
-                       array_wr32(E1000_RA, (i << 1) + 1, 0);
-                       wrfl();
-               }
-       }
-
-       /* Clear the old settings from the MTA */
-       hw_dbg("Clearing MTA\n");
-       for (i = 0; i < hw->mac.mta_reg_count; i++) {
-               array_wr32(E1000_MTA, i, 0);
-               wrfl();
-       }
-
-       /* Load any remaining multicast addresses into the hash table. */
-       for (; mc_addr_count > 0; mc_addr_count--) {
-               hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-               hw_dbg("Hash value = 0x%03X\n", hash_value);
-               igb_mta_set(hw, hash_value);
-               mc_addr_list += ETH_ALEN;
-       }
-}
-
 /**
  *  igb_hash_mc_addr - Generate a multicast hash value
  *  @hw: pointer to the HW structure
 
                                       u16 *duplex);
 s32  igb_id_led_init(struct e1000_hw *hw);
 s32  igb_led_off(struct e1000_hw *hw);
-void igb_update_mc_addr_list(struct e1000_hw *hw,
-                              u8 *mc_addr_list, u32 mc_addr_count,
-                              u32 rar_used_count, u32 rar_count);
 s32  igb_setup_link(struct e1000_hw *hw);
 s32  igb_validate_mdi_setting(struct e1000_hw *hw);
 s32  igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
 void igb_clear_vfta(struct e1000_hw *hw);
 void igb_config_collision_dist(struct e1000_hw *hw);
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
 void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
 void igb_put_hw_semaphore(struct e1000_hw *hw);
 void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);