unsigned int port_num = mp->port_num;
 
        eth_port_init_mac_tables(port_num);
-       memcpy(mp->port_mac_addr, dev->dev_addr, 6);
-       eth_port_uc_addr_set(port_num, mp->port_mac_addr);
+       eth_port_uc_addr_set(port_num, dev->dev_addr);
 }
 
 /*
 
        netif_device_detach(dev);
        eth_port_reset(mp->port_num);
-       eth_port_start(mp);
+       eth_port_start(dev);
        netif_device_attach(dev);
 }
 
        /* Stop RX Queues */
        mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), 0x0000ff00);
 
-       /* Set the MAC Address */
-       memcpy(mp->port_mac_addr, dev->dev_addr, 6);
-
        eth_port_init(mp);
 
        INIT_WORK(&mp->rx_task, (void (*)(void *))mv643xx_eth_rx_task, dev);
 
        mv643xx_eth_rx_task(dev);       /* Fill RX ring with skb's */
 
-       eth_port_start(mp);
+       eth_port_start(dev);
 
        /* Interrupt Coalescing */
 
  *     Prior to calling the initialization routine eth_port_init() the user
  *     must set the following fields under mv643xx_private struct:
  *     port_num                User Ethernet port number.
- *     port_mac_addr[6]        User defined port MAC address.
  *     port_config             User port configuration value.
  *     port_config_extend      User port config extend value.
  *     port_sdma_config        User port SDMA config value.
  *     and ether_init_rx_desc_ring for Rx queues).
  *
  * INPUT:
- *     struct mv643xx_private *mp      Ethernet port control struct
+ *     dev - a pointer to the required interface
  *
  * OUTPUT:
  *     Ethernet port is ready to receive and transmit.
  * RETURN:
  *     None.
  */
-static void eth_port_start(struct mv643xx_private *mp)
+static void eth_port_start(struct net_device *dev)
 {
+       struct mv643xx_private *mp = netdev_priv(dev);
        unsigned int port_num = mp->port_num;
        int tx_curr_desc, rx_curr_desc;
 
                (u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
 
        /* Add the assigned Ethernet address to the port's address table */
-       eth_port_uc_addr_set(port_num, mp->port_mac_addr);
+       eth_port_uc_addr_set(port_num, dev->dev_addr);
 
        /* Assign port configuration and command. */
        mv_write(MV643XX_ETH_PORT_CONFIG_REG(port_num), mp->port_config);
 
 
 struct mv643xx_private {
        int port_num;                   /* User Ethernet port number    */
-       u8 port_mac_addr[6];            /* User defined port MAC address.*/
        u32 port_config;                /* User port configuration value*/
        u32 port_config_extend;         /* User port config extend value*/
        u32 port_sdma_config;           /* User port SDMA config value  */
 /* Port operation control routines */
 static void eth_port_init(struct mv643xx_private *mp);
 static void eth_port_reset(unsigned int eth_port_num);
-static void eth_port_start(struct mv643xx_private *mp);
+static void eth_port_start(struct net_device *dev);
 
 /* Port MAC address routines */
 static void eth_port_uc_addr_set(unsigned int eth_port_num,