sbp2: remove manipulation of inquiry response

This code became ineffective a few Linux releases ago and is not
required anyway.

Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a
scatterlist these days.  Checking random bites into it and then
mangling the data in sbp2_check_sbp2_response will cause really bad
memory corruption when you're not lucky enough to have the check not
trigger by luck.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c30e03a0e63b4e438d767b632dc740b0a024d41b..11c353a4653b5cbc3c3ade56857ac9a61063437b 100644 (file)
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -2111,33 +2111,6 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
        return sbp2_status[8] & 0x3f;   /* return scsi status */
 }
 
-/*
- * This function is called after a command is completed, in order to do any necessary SBP-2
- * response data translations for the SCSI stack
- */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-                                    struct scsi_cmnd *SCpnt)
-{
-       u8 *scsi_buf = SCpnt->request_buffer;
-
-       SBP2_DEBUG_ENTER();
-
-       if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
-               /*
-                * Make sure data length is ok. Minimum length is 36 bytes
-                */
-               if (scsi_buf[4] == 0) {
-                       scsi_buf[4] = 36 - 5;
-               }
-
-               /*
-                * Fix ansi revision and response data format
-                */
-               scsi_buf[2] |= 2;
-               scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
-       }
-}
-
 /*
  * This function deals with status writes from the SBP-2 device
  */
@@ -2476,13 +2449,6 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
                SCpnt->result = DID_ERROR << 16;
        }
 
-       /*
-        * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
-        */
-       if (SCpnt->result == DID_OK << 16) {
-               sbp2_check_sbp2_response(scsi_id, SCpnt);
-       }
-
        /*
         * If a bus reset is in progress and there was an error, complete
         * the command as busy so that it will get retried.

diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index f4ccc9d0fba4106d6a8da4e6f886b45f3172993f..2f53b16afc51c2319935e0280338fb64ca139a65 100644 (file)
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -395,9 +395,8 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
                             struct scsi_cmnd *SCpnt,
                             void (*done)(struct scsi_cmnd *));
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-                                    struct scsi_cmnd *SCpnt);
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
+                                             unchar *sense_data);
 static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
                                      struct unit_directory *ud);
 static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);