From: Ed Lin Date: Thu, 10 May 2007 04:50:33 +0000 (-0800) Subject: [SCSI] stex: fix id mapping issue X-Git-Tag: v2.6.22-rc4~100^2~14 X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=commitdiff_plain;h=e0b2e597d5dd8c4f3778545f65c29a9c6aba0e3a;p=linux-2.6-omap-h63xx.git [SCSI] stex: fix id mapping issue The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by: Ed Lin Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index ce63044b1ec..18dd5cc4d7c 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -209,6 +209,7 @@ static struct { {"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, + {"Promise", "", NULL, BLIST_SPARSELUN}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, {"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN}, {"SEAGATE", "ST34555N", "0930", BLIST_NOTQ}, /* Chokes on tagged INQUIRY */ diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 69be1324b11..96dcbac9545 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -113,10 +113,6 @@ enum { SG_CF_64B = 0x40, /* 64 bit item */ SG_CF_HOST = 0x20, /* sg in host memory */ - ST_MAX_ARRAY_SUPPORTED = 16, - ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1), - ST_MAX_LUN_PER_TARGET = 16, - st_shasta = 0, st_vsc = 1, st_vsc1 = 2, @@ -586,7 +582,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) u16 tag; host = cmd->device->host; id = cmd->device->id; - lun = cmd->device->channel; /* firmware lun issue work around */ + lun = cmd->device->lun; hba = (struct st_hba *) &host->hostdata[0]; switch (cmd->cmnd[0]) { @@ -605,8 +601,19 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) stex_invalid_field(cmd, done); return 0; } + case REPORT_LUNS: + /* + * The shasta firmware does not report actual luns in the + * target, so fail the command to force sequential lun scan. + * Also, the console device does not support this command. + */ + if (hba->cardtype == st_shasta || id == host->max_id - 1) { + stex_invalid_field(cmd, done); + return 0; + } + break; case INQUIRY: - if (id != ST_MAX_ARRAY_SUPPORTED) + if (id != host->max_id - 1) break; if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) { stex_direct_copy(cmd, console_inq_page, @@ -624,7 +631,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) ver.oem = ST_OEM; ver.build = ST_BUILD_VER; ver.signature[0] = PASSTHRU_SIGNATURE; - ver.console_id = ST_MAX_ARRAY_SUPPORTED; + ver.console_id = host->max_id - 1; ver.host_no = hba->host->host_no; cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ? DID_OK << 16 | COMMAND_COMPLETE << 8 : @@ -645,13 +652,8 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) req = stex_alloc_req(hba); - if (hba->cardtype == st_yosemite) { - req->lun = lun * (ST_MAX_TARGET_NUM - 1) + id; - req->target = 0; - } else { - req->lun = lun; - req->target = id; - } + req->lun = lun; + req->target = id; /* cdb */ memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH); @@ -767,18 +769,6 @@ static void stex_ys_commands(struct st_hba *hba, ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT; else ccb->srb_status = SRB_STATUS_SUCCESS; - } else if (ccb->cmd->cmnd[0] == REPORT_LUNS) { - u8 *report_lun_data = (u8 *)hba->copy_buffer; - - count = STEX_EXTRA_SIZE; - stex_internal_copy(ccb->cmd, report_lun_data, - &count, ccb->sg_count, ST_FROM_CMD); - if (report_lun_data[2] || report_lun_data[3]) { - report_lun_data[2] = 0x00; - report_lun_data[3] = 0x08; - stex_internal_copy(ccb->cmd, report_lun_data, - &count, ccb->sg_count, ST_TO_CMD); - } } } @@ -1229,12 +1219,18 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE; hba->mu_status = MU_STATE_STARTING; - /* firmware uses id/lun pair for a logical drive, but lun would be - always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use - channel to map lun here */ - host->max_channel = ST_MAX_LUN_PER_TARGET - 1; - host->max_id = ST_MAX_TARGET_NUM; - host->max_lun = 1; + if (hba->cardtype == st_shasta) { + host->max_lun = 8; + host->max_id = 16 + 1; + } else if (hba->cardtype == st_yosemite) { + host->max_lun = 128; + host->max_id = 1 + 1; + } else { + /* st_vsc and st_vsc1 */ + host->max_lun = 1; + host->max_id = 128 + 1; + } + host->max_channel = 0; host->unique_id = host->host_no; host->max_cmd_len = STEX_CDB_LENGTH;