Sam Ravnborg [Sat, 2 Feb 2008 20:09:57 +0000 (21:09 +0100)]
kconfig: ignore select of unknown symbol
We have had warnings for a long time about select of unknow symbol
but the warnings does not really makes sense since we may
select a symbol that is relevant and defined in one
arch but not in another arch.
And as long as we do not use a common set of Kconfig files
for all archs lets just ignore this case.
Previously we have used this to find bad uses of
select but we need a more relaible method to do so.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
Sam Ravnborg [Sat, 2 Feb 2008 19:44:09 +0000 (20:44 +0100)]
kconfig: mark config as changed when loading an alternate config
Michal Zachar <mgzachar@mail.t-com.sk> reported that
menuconfig did not save the new config when loading
an alternate config unless he altered it manually.
Mark config as changed upon load of alternate config fixed this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel <zippel@linux-m68k.org>
Ralf Baechle [Wed, 30 Jan 2008 14:14:08 +0000 (14:14 +0000)]
Remove __INIT_REFOK and __INITDATA_REFOK
Commit 312b1485fb509c9bc32eda28ad29537896658cb8 made __INIT_REFOK expand
into .section .section ".ref.text", "ax". Since the assembler doesn't
tolerate stuttering in the source that broke all MIPS builds.
Since with this change Sam downgraded __INIT_REFOK to just a backward
compat thing and there being only a single use in the MIPS arch code the
best solution is to delete both of __INIT_REFOK and __INITDATA_REFOK (which
was equally broken) being unused anyway these can be deleted.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Nick Piggin [Sat, 2 Feb 2008 14:01:17 +0000 (15:01 +0100)]
fix writev regression: pan hanging unkillable and un-straceable
Frederik Himpe reported an unkillable and un-straceable pan process.
Zero length iovecs can go into an infinite loop in writev, because the
iovec iterator does not always advance over them.
The sequence required to trigger this is not trivial. I think it
requires that a zero-length iovec be followed by a non-zero-length iovec
which causes a pagefault in the atomic usercopy. This causes the writev
code to drop back into single-segment copy mode, which then tries to
copy the 0 bytes of the zero-length iovec; a zero length copy looks like
a failure though, so it loops.
Put a test into iov_iter_advance to catch zero-length iovecs. We could
just put the test in the fallback path, but I feel it is more robust to
skip over zero-length iovecs throughout the code (iovec iterator may be
used in filesystems too, so it should be robust).
All those 2-byte values denoting the different capabilities are being written to
the local copy of the caps buffer without being converted to big endian for
simplicity of usage and shorter code later. Also, we add some comments stating
which are the fields of the caps page in question in order to alleviate the
cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results().
There should be no functional changes resulting from this patch.
SELECT_DRIVE() is called by IDE core code in start_request() before device
driver's ->do_request method. In ide-scsi case ->do_request is implemented
by idescsi_do_request() which is also the only user of idescsi_issue_pc().
* Factor out code for finding ide_hwifs[] slot from ide_register_hw()
to ide_deprecated_find_port().
* Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add()
instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop
which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot
cannot be find).
This patch leaves us with only two ide_register_hw() users:
- drivers/macintosh/mediabay.c
- drivers/ide/ide.c
Borislav Petkov [Sat, 2 Feb 2008 18:56:38 +0000 (19:56 +0100)]
ide-floppy: fix most of the remaining checkpatch.pl issues
such as
ERROR: switch and case should be at the same indent
ERROR: need spaces around that '=' (ctx:VxV)
ERROR: trailing statements should be on next line
WARNING: no space between function name and open parenthesis '('
WARNING: printk() should include KERN_ facility level
ERROR: That open brace { should be on the previous line
ERROR: use tabs not spaces
ERROR: do not use assignment in if condition
WARNING: braces {} are not necessary for single statement blocks
ERROR: need space after that ',' (ctx:VxV)
WARNING: line over 80 characters
ERROR: do not use assignment in if condition
...
and so on.
Borislav Petkov [Sat, 2 Feb 2008 18:56:37 +0000 (19:56 +0100)]
ide-floppy: remove unused flag PC_ABORT
This flag was never being set in the code so remove it. By the way, the
code in the second patch was being executed unconditionally, i.e. in case
pc->retries > IDEFLOPPY_MAX_PC_RETRIES is true (actually that is the only case
when the outer if-test passed), !test_bit(PC_ABORT, &pc->flags)
was always true so the comment is now incorrect and has to go.
We merge idefloppy_{input,output}_buffers() into idefloppy_io_buffers() by
introducing a 4th arg. called direction. According to its value
we atapi_input_bytes() or atapi_output_bytes(). Also, this simplifies the
interrupt handler logic a bit. Finally, rename idefloppy_io_buffers() to
ide_floppy_io_buffers().
Borislav Petkov [Sat, 2 Feb 2008 18:56:35 +0000 (19:56 +0100)]
ide-floppy: mv idefloppy_{should_,}report_error
In addition to shortening the function name, move the printk-call into the
function thereby saving some code lines. Also, make the function out_of_line
since it is not on a performance critical path. Finally, rename the reworked
function to ide_floppy..().
Borislav Petkov [Sat, 2 Feb 2008 18:56:35 +0000 (19:56 +0100)]
ide-floppy: factor out ioctl handlers from idefloppy_ioctl()
By passing idefloppy_floppy_t *floppy to the factored out functions, we get
rid of (almost) all local vars so stack usage should be at minimum here. Also,
we merge idefloppy_begin_format() into idefloppy_format_start() since it is its
only user. Also, rename idefloppy_format_start() to idefloppy_format_unit().
Finally, rename the reworked functions to ide_floppy..().
Also,
- remove the accompanying 4 byte idefloppy_capacity_header.
- rename functions from idefloppy_... to ide_floppy_... after cleanup.
- simplify loop in ide_floppy_get_capacity() by reversing if-test condition
logically.
- finally, fix white space and checkpatch.pl issues
This change is rather temporary and is in preparation of using generic commands
as is the case with ide-cd and the uniform cdrom layer (i.e. init_cdrom_command())
However, before this happens, we'll have to remove all typedefs and teach
idefloppy_create_mode_sense_cmd() to work directly on u8 buffers.
Also, since idefloppy_get_capability_page() was used to read only the sfrp bit,
rename the latter so that the name reflects what it does.
Borislav Petkov [Sat, 2 Feb 2008 18:56:33 +0000 (19:56 +0100)]
ide-floppy: disambiguate function names
There were two almost identical function names in ide-floppy.c, which makes
their distinction almost impossible. While ide_floppy_release() cleans up the
object after the last reference to it has been dropped, idefloppy_release() is
the blkdev .release method from struct block_device_operations which releases
that last reference.
Rename ide_floppy_release() to idefloppy_cleanup_obj() in order to make its
purpose more clear.
There should be no functionality change resulting from this patch.
Borislav Petkov [Sat, 2 Feb 2008 18:56:33 +0000 (19:56 +0100)]
ide-floppy: convert to generic packet commands
Replace the ide-floppy packet commands opcode defines with the generic ones.
Add a missing GPCMD_WRITE_12 (opcode 0xaa) to the generic ones in cdrom.h. The
last one can be found in the current version of INF-8090, p.905.
[ Bart: Tejun's libata patch also adding GPCMD_WRITE_12 got merged first ]
* Call the new method in ide_init_port() if:
- the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78')
- DMA initialization was successful (if hwif->dma_base is not set
ide_init_port() sets hwif->ultra_mask to zero)
- "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT')
* Convert PCI host drivers to use ->cable_detect method.
While at it:
* Factor out cable detection to separate functions (if not already done).
* hpt366.c/it8213.c/slc90e66.c:
- don't check cable type if "idex=ata66" is used
* pdc202xx_new.c:
- add __devinit tag to pdcnew_cable_detect()
* pdc202xx_old.c:
- rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect()
- add __devinit tag to pdc2026x_old_cable_detect()
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide: add struct ide_port_info instances to legacy host drivers
* Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma().
* Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version.
* Add 'const struct ide_port_info *d' argument to ide_device_add[_all]().
* Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(),
move it to ide-probe.c and call it in in ide_device_add_all() instead of
ide_pci_setup_ports().
* Move ->mate setup to ide_device_add_all() from ide_port_init().
* Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable
->autotune currently.
* Setup hwif->chipset in ide_init_port() but iff pi->chipset is set
(to not override setup done by ide_hwif_configure()).
* Add ETRAX host handling to ide_device_add_all().
* cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n.
* pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks
setup to pmac_ide_setup_device().
* Add 'struct ide_port_info' instances to legacy host drivers, pass them to
ide_device_add() calls and then remove open-coded ports initialization.
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
projects / linux-2.6-omap-h63xx.git / log