OGAWA Hirofumi [Thu, 6 Nov 2008 20:53:47 +0000 (12:53 -0800)]
fat: use generic_file_llseek() for directory
Since fat_dir_ioctl() was already fixed (i.e. called under ->i_mutex),
and __fat_readdir() doesn't take BKL anymore. So, BKL for ->llseek()
is pointless, and we have to use generic_file_llseek().
OGAWA Hirofumi [Thu, 6 Nov 2008 20:53:47 +0000 (12:53 -0800)]
fat: Fix and cleanup timestamp conversion
This cleans date_dos2unix()/fat_date_unix2dos() up. New code should be
much more readable.
And this fixes those old functions. Those doesn't handle 2100
correctly. 2100 isn't leap year, but old one handles it as leap year.
Also, with this, centi sec is handled and is fixed.
Andrew Victor [Thu, 6 Nov 2008 20:53:42 +0000 (12:53 -0800)]
SAM9 watchdog: update for moved headers
The architecture header files were recently moved from
include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9
watchdog driver still includes a header from the old location.
Signed-off-by: Andrew Victor <linux@maxim.org.za> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frans Pop [Thu, 6 Nov 2008 20:53:41 +0000 (12:53 -0800)]
rtc-cmos: fix boot log message
-rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
+rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Thu, 6 Nov 2008 20:53:40 +0000 (12:53 -0800)]
atmel_serial: keep clock off when it's not needed
The atmel_serial driver is mismanaging its clock by leaving it on at all
times ... the whole point of clock management is to leave it off unless
it's actively needed, which conserves power!!
Although the kernel doesn't actually hang without my fix, it does
discard quite a lot of early console output.
The result still looks correct:
usart users= 1 on 35000000 Hz, for atmel_usart.0
usart users= 0 off 35000000 Hz, for atmel_usart.2
when using ttyS0 as serial console.
[haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 3e680aae4e53ab54cdbb0c29257dae0cbb158e1c ("fb: convert
lock/unlock_kernel() into local fb mutex") introduced several deadlocks
in the fb_compat_ioctl() path, as mutex_lock() doesn't allow recursion,
unlike lock_kernel(). This broke frame buffer applications on 64-bit
systems with a 32-bit userland.
This patch fixes the remaining deadlocks:
- Revert commit 120a37470c2831fea49fdebaceb5a7039f700ce6,
- Extract the core logic of fb_ioctl() into a new function do_fb_ioctl(),
- Change all callsites of fb_ioctl() where info->lock is already held to
call do_fb_ioctl() instead,
- Add sparse annotations to all routines that take info->lock.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerald Schaefer [Thu, 6 Nov 2008 20:53:36 +0000 (12:53 -0800)]
memory hotplug: fix page_zone() calculation in test_pages_isolated()
My last bugfix here (adding zone->lock) introduced a new problem: Using
page_zone(pfn_to_page(pfn)) to get the zone after the for() loop is wrong.
pfn will then be >= end_pfn, which may be in a different zone or not
present at all. This may lead to an addressing exception in page_zone()
or spin_lock_irqsave().
Now I use __first_valid_page() again after the loop to find a valid page
for page_zone().
Arthur Jones [Thu, 6 Nov 2008 20:53:35 +0000 (12:53 -0800)]
ext3: wait on all pending commits in ext3_sync_fs
In ext3_sync_fs, we only wait for a commit to finish if we started it, but
there may be one already in progress which will not be synced.
In the case of a data=ordered umount with pending long symlinks which are
delayed due to a long list of other I/O on the backing block device, this
causes the buffer associated with the long symlinks to not be moved to the
inode dirty list in the second phase of fsync_super. Then, before they
can be dirtied again, kjournald exits, seeing the UMOUNT flag and the
dirty pages are never written to the backing block device, causing long
symlink corruption and exposing new or previously freed block data to
userspace.
This can be reproduced with a script created
by Eric Sandeen <sandeen@redhat.com>:
#!/bin/bash
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
rm -f /mnt/test2/*
dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512
touch
/mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
ln -s
/mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
/mnt/test2/link
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
ls /mnt/test2/
umount /mnt/test2
To ensure all commits are synced, we flush all journal commits now when
sync_fs'ing ext3.
Signed-off-by: Arthur Jones <ajones@riverbed.com> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> [2.6.everything] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: dann frazier <dannf@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Thu, 6 Nov 2008 20:53:32 +0000 (12:53 -0800)]
cgroups: fix invalid cgrp->dentry before cgroup has been completely removed
This fixes an oops when reading /proc/sched_debug.
A cgroup won't be removed completely until finishing cgroup_diput(), so we
shouldn't invalidate cgrp->dentry in cgroup_rmdir(). Otherwise, when a
group is being removed while cgroup_path() gets called, we may trigger
NULL dereference BUG.
The bug can be reproduced:
# cat test.sh
#!/bin/sh
mount -t cgroup -o cpu xxx /mnt
for (( ; ; ))
{
mkdir /mnt/sub
rmdir /mnt/sub
}
# ./test.sh &
# cat /proc/sched_debug
It really does not matter when we flush the lru. The system is free to
add pages onto the lru even during migration which will make the page
migration either skip the page (mbind, migrate_pages) or return a busy
state (move_pages).
Fixes this lockdep warning (and potential deadlock):
Some VM place has
mmap_sem -> kevent_wq via lru_add_drain_all()
net/core/dev.c::dev_ioctl() has
rtnl_lock -> mmap_sem (*) the ioctl has copy_from_user() and it can do page fault.
linkwatch_event has
kevent_wq -> rtnl_lock
Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fbdev: add new framebuffer driver for Fujitsu MB862xx GDCs
Add a framebuffer driver for the Fujitsu Carmine/Coral-P(A)/Lime graphics
controllers. Lime GDC support is known to work on PPC440EPx based lwmon5
and MPC8544E based socrates embedded boards, both equipped with Lime GDC.
Carmine/Coral-P PCI GDC support is known to work on PPC440EPx based
Sequoia board and also on x86 platform.
Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Thu, 6 Nov 2008 20:53:29 +0000 (12:53 -0800)]
oom: do not dump task state for non thread group leaders
When /proc/sys/vm/oom_dump_tasks is enabled, it's only necessary to dump
task state information for thread group leaders. The kernel log gets
quickly overwhelmed on machines with a massive number of threads by
dumping non-thread group leaders.
Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 6 Nov 2008 20:53:27 +0000 (12:53 -0800)]
hugetlb: pull gigantic page initialisation out of the default path
As we can determine exactly when a gigantic page is in use we can optimise
the common regular page cases by pulling out gigantic page initialisation
into its own function. As gigantic pages are never released to buddy we
do not need a destructor. This effectivly reverts the previous change to
the main buddy allocator. It also adds a paranoid check to ensure we
never release gigantic pages from hugetlbfs to the main buddy.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Thu, 6 Nov 2008 20:53:26 +0000 (12:53 -0800)]
hugetlbfs: handle pages higher order than MAX_ORDER
When working with hugepages, hugetlbfs assumes that those hugepages are
smaller than MAX_ORDER. Specifically it assumes that the mem_map is
contigious and uses that to optimise access to the elements of the mem_map
that represent the hugepage. Gigantic pages (such as 16GB pages on
powerpc) by definition are of greater order than MAX_ORDER (larger than
MAX_ORDER_NR_PAGES in size). This means that we can no longer make use of
the buddy alloctor guarentees for the contiguity of the mem_map, which
ensures that the mem_map is at least contigious for maximmally aligned
areas of MAX_ORDER_NR_PAGES pages.
This patch adds new mem_map accessors and iterator helpers which handle
any discontiguity at MAX_ORDER_NR_PAGES boundaries. It then uses these to
implement gigantic page versions of copy_huge_page and clear_huge_page,
and to allow follow_hugetlb_page handle gigantic pages.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a regression where the controller firmware version is not
displayed in procfs. The previous patch would be called anytime something
changed. This will get called only once for each controller.
Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a broken symlink in sysfs that was introduced by the
above commit. We broke it in 2.6.27-rc on or about 20080804. Some
installers are broken if this symlink does not exist and they may not
detect the logical drives configured on the controller. It does not
require being backported into 2.6.26.x or earlier kernels.
Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> [2.6.27.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Thu, 6 Nov 2008 20:53:23 +0000 (12:53 -0800)]
autofs4: collect version check return
The function check_dev_ioctl_version() returns an error code upon fail but
it isn't captured and returned in validate_dev_ioctl() as it should be.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Thu, 6 Nov 2008 20:53:22 +0000 (12:53 -0800)]
autofs4: correct offset mount expire check
When checking a directory tree in autofs_tree_busy() we can incorrectly
decide that the tree isn't busy. This happens for the case of an active
offset mount as autofs4_follow_mount() follows past the active offset
mount, which has an open file handle used for expires, causing the file
handle not to count toward the busyness check.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henrik Rydberg [Thu, 6 Nov 2008 20:53:20 +0000 (12:53 -0800)]
hwmon: applesmc: add support for Macbook 5
Add accelerometer, backlight and temperature sensor support for the new
unibody Macbook 5.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: David M. Lary <dmlary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Thu, 6 Nov 2008 20:53:18 +0000 (12:53 -0800)]
rtc: fix handling of missing tm_year data when reading alarms
When fixing up invalid years rtc_read_alarm() was calling rtc_valid_tm()
as a boolean but rtc_valid_tm() returns zero on success or a negative
number if the time is not valid so the test was inverted.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Problem 1 (see patch below):
vc_tab_stop is declared as an array of 8 unsigned ints in struct
vc_data in include/linux/console_struct.h .
In drivers/char/vt.c only 5 of these 8 unsigned ints get initialized
leading to unintended tabulator placement on displays with more than
160 columns text.
Problem 2 (open):
Upcoming displays will have more than 256 columns of text leading to
invalid memory access in drivers/char/vt.c during tabulator
calculations:
if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31)))
break;
Signed-off-by: Wolfgang Kroworsch <wolfgang@kroworsch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86, xen: fix use of pgd_page now that it really does return a page
Impact: fix 32-bit Xen guest boot crash
On 32-bit PAE, pud_page, for no good reason, didn't really return a
struct page *. Since Jan Beulich's fix "i386/PAE: fix pud_page()",
pud_page does return a struct page *.
Because PAE has 3 pagetable levels, the pud level is folded into the
pgd level, so pgd_page() is the same as pud_page(), and now returns
a struct page *. Update the xen/mmu.c code which uses pgd_page()
accordingly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Miller [Thu, 6 Nov 2008 08:37:40 +0000 (00:37 -0800)]
net: Fix recursive descent in __scm_destroy().
__scm_destroy() walks the list of file descriptors in the scm_fp_list
pointed to by the scm_cookie argument.
Those, in turn, can close sockets and invoke __scm_destroy() again.
There is nothing which limits how deeply this can occur.
The idea for how to fix this is from Linus. Basically, we do all of
the fput()s at the top level by collecting all of the scm_fp_list
objects hit by an fput(). Inside of the initial __scm_destroy() we
keep running the list until it is empty.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Theodore Ts'o [Thu, 6 Nov 2008 21:49:36 +0000 (16:49 -0500)]
ext4: calculate journal credits correctly
This fixes a 2.6.27 regression which was introduced in commit a02908f1.
We weren't passing the chunk parameter down to the two subections,
ext4_indirect_trans_blocks() and ext4_ext_index_trans_blocks(), with
the result that massively overestimate the amount of credits needed by
ext4_da_writepages, especially in the non-extents case. This causes
failures especially on /boot partitions, which tend to be small and
non-extent using since GRUB doesn't handle extents.
This patch fixes the bug reported by Joseph Fannin at:
http://bugzilla.kernel.org/show_bug.cgi?id=11964
Zhu, Yi [Tue, 4 Nov 2008 20:21:36 +0000 (12:21 -0800)]
iwl3945: fix deadlock on suspend
This patch fixes iwl3945 deadlock during suspend by moving notify_mac out
of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas.
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reinette Chatre [Tue, 4 Nov 2008 20:21:35 +0000 (12:21 -0800)]
iwl3945: do not send scan command if channel count zero
Do not send scan command if no channels to scan.
This avoids a Microcode error as reported in:
http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650
http://bugzilla.kernel.org/show_bug.cgi?id=11806
http://marc.info/?l=linux-wireless&m=122437145211886&w=2
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohamed Abbas [Tue, 4 Nov 2008 20:21:34 +0000 (12:21 -0800)]
iwl3945: clear scanning bits upon failure
This patch ensures we clear any scan status bit when
an error occurs while sending the scan command. It is
the implementation of patch:
"iwlwifi: clear scanning bits upon failure"
for iwl3945.
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bob Copeland [Tue, 4 Nov 2008 03:14:00 +0000 (22:14 -0500)]
ath5k: correct handling of rx status fields
ath5k_rx_status fields rs_antenna and rs_more are u8s, but we
were setting them with bitwise ANDs of 32-bit values.
As a consequence, jumbo frames would not be discarded as intended.
Then, because the hw rate value of such frames is zero, and, since
"ath5k: rates cleanup", we do not fall back to the basic rate, such
packets would trigger the following WARN_ON:
> I'll have a prod at why the [hso] rfkill stuff isn't working next
Ok, I believe this is due to the addition of rfkill_check_duplicity in
rfkill and the fact that test_bit actually returns a negative value
rather than the postive one expected (which is of course equally true).
So when the second WLAN device (the hso device, with the EEE PC WLAN
being the first) comes along rfkill_check_duplicity returns a negative
value and so rfkill_register returns an error. Patch below fixes this
for me.
Signed-Off-By: Jonathan McDowell <noodles@earth.li> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Avoid the sleep by changing iwl_scan_cancel_timeout with
iwl_scan_cancel and simply returning on failure if the scan persists.
This will cause hardware decryption to fail and we'll handle a few more
frames with software decryption.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohamed Abbas [Fri, 24 Oct 2008 06:48:54 +0000 (23:48 -0700)]
iwlwifi: clear scanning bits upon failure
In iwl_bg_request_scan function, if we could not send a
scan command it will go to done.
In done it does the right thing to call mac80211 with
scan complete, but the problem is STATUS_SCAN_HW is still
set causing any future scan to fail. Fix by clearing the scanning status
bits if scan fails.
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Williams [Fri, 7 Nov 2008 00:43:55 +0000 (17:43 -0700)]
[ARM] xsc3: fix xsc3_l2_inv_range
When 'start' and 'end' are less than a cacheline apart and 'start' is
unaligned we are done after cleaning and invalidating the first
cacheline. So check for (start < end) which will not walk off into
invalid address ranges when (start > end).
This issue was caught by drivers/dma/dmatest.
2.6.27 is susceptible.
Cc: <stable@kernel.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Russell King [Tue, 4 Nov 2008 10:52:28 +0000 (10:52 +0000)]
[ARM] mm: fix page table initialization
As a result of the ptebits changes, we ended up marking device mappings
as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with
serial ports and the like. While reviewing the section mapping table
entries, other errors in the memory type settings for devices were
detected and confirmed to prevent Xscale3 platforms booting.
Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Doug Chapman [Wed, 5 Nov 2008 22:57:52 +0000 (17:57 -0500)]
[IA64] fix boot panic caused by offline CPUs
This fixes a regression introduced by 2c6e6db41f01b6b4eb98809350827c9678996698
"Minimize per_cpu reservations." That patch incorrectly used information about
what CPUs are possible that was not yet initialized by ACPI. The end result
was that per_cpu structures for offline CPUs were not initialized causing a
NULL pointer reference.
Since we cannot do the full acpi_boot_init() call any earlier, the simplest
fix is to just parse the MADT for SAPIC entries early to find the CPU
info. This should also allow for some cleanup of the code added by the
"Minimize per_cpu reservations". This patch just fixes the regressions, the
cleanup will come in a later patch.
Signed-off-by: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> CC: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Russell King [Thu, 6 Nov 2008 17:11:07 +0000 (17:11 +0000)]
[ARM] fix naming of MODULE_START / MODULE_END
As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs
to know where modules are located in the virtual address space.
On ARM, we located this region between MODULE_START and MODULE_END.
Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END.
Update ARM to use the same naming, so is_vmalloc_or_module_addr()
can work properly. Also update the comment on mm/vmalloc.c to
reflect that ARM also places modules in a separate region from the
vmalloc space.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
the assumptio of this change was that this would not break
any existing machine. Andrey Borzenkov reported troubles with
the ACPI reboot method: the system would hang on reboot, necessiating
a power cycle. Probably more systems are affected as well.
Also, there are patches queued up for v2.6.29 to disable virtualization
on emergency_restart() - which was the original motivation of
this change.
Hugh Dickins [Thu, 6 Nov 2008 12:05:40 +0000 (12:05 +0000)]
x86: align DirectMap in /proc/meminfo
Impact: right-align /proc/meminfo consistent with other fields
When the split-LRU patches added Inactive(anon) and Inactive(file) lines
to /proc/meminfo, all counts were moved two columns rightwards to fit in.
Now move x86's DirectMap lines two columns rightwards to line up.
Andrew Victor [Wed, 5 Nov 2008 20:36:35 +0000 (22:36 +0200)]
[WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processors
The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and
CAP9 processors.
Update the configuration to indicate this and allow the driver to be selected.
Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Victor [Wed, 5 Nov 2008 20:18:41 +0000 (22:18 +0200)]
[WATCHDOG] SAM9 watchdog - update for moved headers
The architecture header files were recently moved from
include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/.
The SAM9 watchdog driver still includes a header from the old location.
Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Suresh Siddha [Tue, 4 Nov 2008 21:53:04 +0000 (13:53 -0800)]
x86: add smp_mb() before sending INVALIDATE_TLB_VECTOR
Impact: fix rare x2apic hang
On x86, x2apic mode accesses for sending IPI's don't have serializing
semantics. If the IPI receivner refers(in lock-free fashion) to some
memory setup by the sender, the need for smp_mb() before sending the
IPI becomes critical in x2apic mode.
Add the smp_mb() in native_flush_tlb_others() before sending the IPI.
Andre Noll [Thu, 6 Nov 2008 08:41:24 +0000 (19:41 +1100)]
md: linear: Fix a division by zero bug for very small arrays.
We currently oops with a divide error on starting a linear software
raid array consisting of at least two very small (< 500K) devices.
The bug is caused by the calculation of the hash table size which
tries to compute sector_div(sz, base) with "base" being zero due to
the small size of the component devices of the array.
Fix this by requiring the hash spacing to be at least one which
implies that also "base" is non-zero.
This bug has existed since about 2.6.14.
Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
Rusty Russell [Wed, 5 Nov 2008 02:39:10 +0000 (13:39 +1100)]
cpumask: introduce new API, without changing anything
Impact: introduce new APIs
We want to deprecate cpumasks on the stack, as we are headed for
gynormous numbers of CPUs. Eventually, we want to head towards an
undefined 'struct cpumask' so they can never be declared on stack.
1) New cpumask functions which take pointers instead of copies.
(cpus_* -> cpumask_*)
2) Several new helpers to reduce requirements for temporary cpumasks
(cpumask_first_and, cpumask_next_and, cpumask_any_and)
3) Helpers for declaring cpumasks on or offstack for large NR_CPUS
(cpumask_var_t, alloc_cpumask_var and free_cpumask_var)
4) 'struct cpumask' for explicitness and to mark new-style code.
5) Make iterator functions stop at nr_cpu_ids (a runtime constant),
not NR_CPUS for time efficiency and for smaller dynamic allocations
in future.
6) cpumask_copy() so we can allocate less than a full cpumask eventually
(for alloc_cpumask_var), and so we can eliminate the 'struct cpumask'
definition eventually.
7) work_on_cpu() helper for doing task on a CPU, rather than saving old
cpumask for current thread and manipulating it.
8) smp_call_function_many() which is smp_call_function_mask() except
taking a cpumask pointer.
Note that this patch simply introduces the new functions and leaves
the obsolescent ones in place. This is to simplify the transition
patches.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alan Stern [Thu, 6 Nov 2008 07:42:49 +0000 (08:42 +0100)]
Block: use round_jiffies_up()
This patch (as1159b) changes the timeout routines in the block core to
use round_jiffies_up(). There's no point in rounding the timer
deadline down, since if it expires too early we will have to restart
it.
The patch also removes some unnecessary tests when a request is
removed from the queue's timer list.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Alan Stern [Thu, 6 Nov 2008 07:42:48 +0000 (08:42 +0100)]
Add round_jiffies_up and related routines
This patch (as1158b) adds round_jiffies_up() and friends. These
routines work like the analogous round_jiffies() functions, except
that they will never round down.
The new routines will be useful for timeouts where we don't care
exactly when the timer expires, provided it doesn't expire too soon.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Wed, 5 Nov 2008 09:21:06 +0000 (10:21 +0100)]
block: fix __blkdev_get() for removable devices
Commit 0762b8bde9729f10f8e6249809660ff2ec3ad735 moved disk_get_part()
in front of recursive get on the whole disk, which caused removable
devices to try disk_get_part() before rescanning after a new media is
inserted, which might fail legit open attempts or give the old
partition.
This patch fixes the problem by moving disk_get_part() after
__blkdev_get() on the whole disk.
Suresh Siddha [Thu, 30 Oct 2008 17:28:41 +0000 (18:28 +0100)]
generic-ipi: fix the smp_mb() placement
smp_mb() is needed (to make the memory operations visible globally) before
sending the ipi on the sender and the receiver (on Alpha atleast) needs
smp_read_barrier_depends() in the handler before reading the call_single_queue
list in a lock-free fashion.
On x86, x2apic mode register accesses for sending IPI's don't have serializing
semantics. So the need for smp_mb() before sending the IPI becomes more
critical in x2apic mode.
Remove the unnecessary smp_mb() in csd_flag_wait(), as the presence of that
smp_mb() doesn't mean anything on the sender, when the ipi receiver is not
doing any thing special (like memory fence) after clearing the CSD_FLAG_WAIT.
Mike Anderson [Thu, 30 Oct 2008 09:16:20 +0000 (02:16 -0700)]
blk: move blk_delete_timer call in end_that_request_last
Move the calling blk_delete_timer to later in end_that_request_last to
address an issue where blkdev_dequeue_request may have add a timer for the
request.
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Tejun Heo [Thu, 30 Oct 2008 07:32:29 +0000 (08:32 +0100)]
block: add timer on blkdev_dequeue_request() not elv_next_request()
Block queue supports two usage models - one where block driver peeks
at the front of queue using elv_next_request(), processes it and
finishes it and the other where block driver peeks at the front of
queue, dequeue the request using blkdev_dequeue_request() and finishes
it. The latter is more flexible as it allows the driver to process
multiple commands concurrently.
These two inconsistent usage models affect the block layer
implementation confusing. For some, elv_next_request() is considered
the issue point while others consider blkdev_dequeue_request() the
issue point.
Till now the inconsistency mostly affect only accounting, so it didn't
really break anything seriously; however, with block layer timeout,
this inconsistency hits hard. Block layer considers
elv_next_request() the issue point and adds timer but SCSI layer
thinks it was just peeking and when the request can't process the
command right away, it's just left there without further processing.
This makes the request dangling on the timer list and, when the timer
goes off, the request which the SCSI layer and below think is still on
the block queue ends up in the EH queue, causing various problems - EH
hang (failed count goes over busy count and EH never wakes up),
WARN_ON() and oopses as low level driver trying to handle the unknown
command, etc. depending on the timing.
As SCSI midlayer is the only user of block layer timer at the moment,
moving blk_add_timer() to elv_dequeue_request() fixes the problem;
however, this two usage models definitely need to be cleaned up in the
future.
Define __BIOVEC_PHYS_MERGEABLE as the default implementation of
BIOVEC_PHYS_MERGEABLE, so that its available for reuse within an
arch-specific definition of BIOVEC_PHYS_MERGEABLE.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
NeilBrown [Thu, 6 Nov 2008 06:28:20 +0000 (17:28 +1100)]
md: fix bug in raid10 recovery.
Adding a spare to a raid10 doesn't cause recovery to start.
This is due to an silly type in
commit 6c2fce2ef6b4821c21b5c42c7207cb9cf8c87eda
and so is a bug in 2.6.27 and .28-rc.
Thanks to Thomas Backlund for bisecting to find this.
Cc: Thomas Backlund <tmb@mandriva.org> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Thu, 6 Nov 2008 06:28:01 +0000 (17:28 +1100)]
md: revert the recent addition of a call to the BLKRRPART ioctl.
It turns out that it is only safe to call blkdev_ioctl when the device
is actually open (as ->bd_disk is set to NULL on last close). And it
is quite possible for do_md_stop to be called when the device is not
open. So discard the call to blkdev_ioctl(BLKRRPART) which was
added in
commit 934d9c23b4c7e31840a895ba4b7e88d6413c81f3
It is just as easy to call this ioctl from userspace when needed (on
mdadm -S) so leave it out of the kernel
Ben Hutchings [Wed, 5 Nov 2008 12:04:46 +0000 (12:04 +0000)]
x86: don't allow nr_irqs > NR_IRQS
Impact: fix boot hang on 32-bit systems with more than 224 IO-APIC pins
On some 32-bit systems with a lot of IO-APICs probe_nr_irqs() can
return a value larger than NR_IRQS. This will lead to probe_irq_on()
overrunning the irq_desc array.
I hit this when running net-next-2.6 (close to 2.6.28-rc3) on a
Supermicro dual Xeon system. NR_IRQS is 224 but probe_nr_irqs() detects
5 IOAPICs and returns 240. Here are the log messages:
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Tue Nov 4 16:53:47 2008 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x02] address[0xfec81000] gsi_base[24])
Tue Nov 4 16:53:47 2008 IOAPIC[1]: apic_id 2, version 32, address 0xfec81000, GSI 24-47
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x03] address[0xfec81400] gsi_base[48])
Tue Nov 4 16:53:47 2008 IOAPIC[2]: apic_id 3, version 32, address 0xfec81400, GSI 48-71
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x04] address[0xfec82000] gsi_base[72])
Tue Nov 4 16:53:47 2008 IOAPIC[3]: apic_id 4, version 32, address 0xfec82000, GSI 72-95
Tue Nov 4 16:53:47 2008 ACPI: IOAPIC (id[0x05] address[0xfec82400] gsi_base[96])
Tue Nov 4 16:53:47 2008 IOAPIC[4]: apic_id 5, version 32, address 0xfec82400, GSI 96-119
Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Tue Nov 4 16:53:47 2008 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Tue Nov 4 16:53:47 2008 Enabling APIC mode: Flat. Using 5 I/O APICs
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
[JFFS2] fix race condition in jffs2_lzo_compress()
deflate_mutex protects the globals lzo_mem and lzo_compress_buf. However,
jffs2_lzo_compress() unlocks deflate_mutex _before_ it has copied out the
compressed data from lzo_compress_buf. Correct this by moving the mutex
unlock after the copy.
In addition, document what deflate_mutex actually protects.
Cc: stable@kernel.org Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Randy Dunlap [Wed, 5 Nov 2008 04:46:46 +0000 (20:46 -0800)]
net/9p: fix printk format warnings
Fix printk format warnings in net/9p.
Built cleanly on 7 arches.
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Tom Tucker [Thu, 23 Oct 2008 21:33:25 +0000 (16:33 -0500)]
p9: Fix leak of waitqueue in request allocation path
If a T or R fcall cannot be allocated, the function returns an error
but neglects to free the wait queue that was successfully allocated.
If it comes through again a second time this wq will be overwritten
with a new allocation and the old allocation will be leaked.
Also, if the client is subsequently closed, the close path will
attempt to clean up these allocations, so set the req fields to
NULL to avoid duplicate free.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Tom Tucker [Thu, 23 Oct 2008 21:30:13 +0000 (16:30 -0500)]
9p: rdma: Set trans prior to requesting async connection ops
The RDMA connection manager is fundamentally asynchronous.
Since the async callback context is the client pointer, the
transport in the client struct needs to be set prior to calling
the first async op.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Ingo Molnar [Wed, 5 Nov 2008 15:52:08 +0000 (16:52 +0100)]
sched: re-tune balancing
Impact: improve wakeup affinity on NUMA systems, tweak SMP systems
Given the fixes+tweaks to the wakeup-buddy code, re-tweak the domain
balancing defaults on NUMA and SMP systems.
Turn on SD_WAKE_AFFINE which was off on x86 NUMA - there's no reason
why we would not want to have wakeup affinity across nodes as well.
(we already do this in the standard NUMA template.)
lat_ctx on a NUMA box is particularly happy about this change:
[MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)
For "unlock" cycles to 16bit devices in 8bit compatibility mode we need
to use the byte addresses 0xaaa and 0x555. These effectively match
the word address 0x555 and 0x2aa, except the latter has its low bit set.
Most chips don't care about the value of the 'A-1' pin in x8 mode,
but some -- like the ST M29W320D -- do. So we need to be careful to
set it where appropriate.
cfi_send_gen_cmd is only ever passed addresses where the low byte
is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are
affected by this patch, by masking in the extra low bit when the device
is known to be in compatibility mode.
[dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa]
v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile
I'm writing this patch way to late at night.
v3: Bring all of the work back into cfi_build_cmd_addr
including calling of map_bankwidth(map) and cfi_interleave(cfi)
So every caller doesn't need to.
v2: Only modified the address if we our device_type is larger than our
bus width.
Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
David S. Miller [Wed, 5 Nov 2008 11:36:01 +0000 (03:36 -0800)]
tcp: Fix recvmsg MSG_PEEK influence of blocking behavior.
Vito Caputo noticed that tcp_recvmsg() returns immediately from
partial reads when MSG_PEEK is used. In particular, this means that
SO_RCVLOWAT is not respected.
Simply remove the test. And this matches the behavior of several
other systems, including BSD.
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Wed, 5 Nov 2008 11:03:18 +0000 (03:03 -0800)]
netfilter: netns ct: walk netns list under RTNL
netns list (just list) is under RTNL. But helper and proto unregistration
happen during rmmod when RTNL is not held, and that's how it was tested:
modprobe/rmmod vs clone(CLONE_NEWNET)/exit.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Wed, 5 Nov 2008 10:30:56 +0000 (11:30 +0100)]
ALSA: hda - Add a quirk for MEDION MD96630
Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085)
with ALC888 codec.
Reference: Novell bnc#412548
https://bugzilla.novell.com/show_bug.cgi?id=412528
Benjamin Thery [Wed, 5 Nov 2008 09:43:57 +0000 (01:43 -0800)]
ipv6: fix run pending DAD when interface becomes ready
With some net devices types, an IPv6 address configured while the
interface was down can stay 'tentative' forever, even after the interface
is set up. In some case, pending IPv6 DADs are not executed when the
device becomes ready.
I observed this while doing some tests with kvm. If I assign an IPv6
address to my interface eth0 (kvm driver rtl8139) when it is still down
then the address is flagged tentative (IFA_F_TENTATIVE). Then, I set
eth0 up, and to my surprise, the address stays 'tentative', no DAD is
executed and the address can't be pinged.
I also observed the same behaviour, without kvm, with virtual interfaces
types macvlan and veth.
Some easy steps to reproduce the issue with macvlan:
1. ip link add link eth0 type macvlan
2. ip -6 addr add 2003::ab32/64 dev macvlan0
3. ip addr show dev macvlan0
...
inet6 2003::ab32/64 scope global tentative
...
4. ip link set macvlan0 up
5. ip addr show dev macvlan0
...
inet6 2003::ab32/64 scope global tentative
...
Address is still tentative
I think there's a bug in net/ipv6/addrconf.c, addrconf_notify():
addrconf_dad_run() is not always run when the interface is flagged IF_READY.
Currently it is only run when receiving NETDEV_CHANGE event. Looks like
some (virtual) devices doesn't send this event when becoming up.
For both NETDEV_UP and NETDEV_CHANGE events, when the interface becomes
ready, run_pending should be set to 1. Patch below.
'run_pending = 1' could be moved below the if/else block but it makes
the code less readable.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 5 Nov 2008 09:35:55 +0000 (01:35 -0800)]
net/9p: fix printk format warnings
Fix printk format warnings in net/9p.
Built cleanly on 7 arches.
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:820: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:867: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:932: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:982: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/9p/client.c:1025: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1227: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 7 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 12 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 8 has type 'u64'
net/9p/client.c:1252: warning: format '%llx' expects type 'long long unsigned int', but argument 13 has type 'u64'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Zijlstra [Tue, 4 Nov 2008 20:25:10 +0000 (21:25 +0100)]
sched: fix buddies for group scheduling
Impact: scheduling order fix for group scheduling
For each level in the hierarchy, set the buddy to point to the right entity.
Therefore, when we do the hierarchical schedule, we have a fair chance of
ending up where we meant to.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently we only have a forward looking buddy, that is, we prefer to
schedule to the task we last woke up, under the presumption that its
going to consume the data we just produced, and therefore will have
cache hot benefits.
This allows co-waking producer/consumer task pairs to run ahead of the
pack for a little while, keeping their cache warm. Without this, we
would interleave all pairs, utterly trashing the cache.
This patch introduces a backward looking buddy, that is, suppose that
in the above scenario, the consumer preempts the producer before it
can go to sleep, we will therefore miss the wakeup from consumer to
producer (its already running, after all), breaking the cycle and
reverting to the cache-trashing interleaved schedule pattern.
The backward buddy will try to schedule back to the task that woke us
up in case the forward buddy is not available, under the assumption
that the last task will be the one with the most cache hot task around
barring current.
This will basically allow a task to continue after it got preempted.
In order to avoid starvation, we allow either buddy to get wakeup_gran
ahead of the pack.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / linux-2.6-omap-h63xx.git / log