V4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7696): pvrusb2: state control tweak

Don't trigger a pathway state change if it's already been triggered
(eliminates some wasted processing and some debug output noise)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB is off

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULL

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-down

Move pvr2_dvb_adapter usage out of the pvrusb2 driver core - it's
really private to the pvrusb2-dvb module and nothing outside of the
dvb implementation should care about it.  Creation / destruction of
the pvr2_dvb_adapter instance is now contained entirely within
pvrusb2-dvb.c.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7691): pvrusb2-dvb: Don't initialize if device lacks a digital side

In the end we'd like the dvb interface to always be present - even for
analog devices (via the mpeg encoder).  However right now pvrusb2-dvb
won't operate correctly if the hardware doesn't have a digital tuner,
so don't initialize the DVB interface unless we know we have a digital
tuner.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7690): pvrusb2-dvb: Remove digital_up flag

Other pvrusb2-dvb changes have made the digital_up flag obsolete.  So
kill it.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7689): pvrusb2-dvb: Rework module tear-down

Rather than making an explicit call to tear down the pvrusb2-dvb
module, use the callback in the pvr2_channel structure.  This has the
advantage that now tear-down only happens when it makes sense.  The
previous implementation had scenarios where it was possible for the
tear-down call to happen without a prior initialization.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7688): pvrusb2: Clean up dvb streaming start/stop

Eliminate the need for a separate pvr2_dvb_fh; since in the DVB
context there can only ever be a single instance then there is no need
for a separate instance to handle streaming state.  This simplifies
the module.  Also move streaming start/stop out of the feed thread and
into the driver's main context - which makes it possible for streaming
start up failures to be detected by the DVB core.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7687): pvrusb2: Fix oops in pvrusb2-dvb

The pvrusb2-dvb feed thread cannot be allowed to exit by itself
without first waiting for kthread_should_stop() to return true.
Otherwise the driver will have a dangling task_struct context, which
will cause a very nasty kernel oops.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7686): pvrusb2: Fix broken debug interface build

Fix pvrusb2 kbuild typo introduced when pvrusb2-dvb was added.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7685): pvrusb2: Fix really bad typo if DVB config option description

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7684): pvrusb2: Add VIDEO_PVRUSB2_DVB config variable

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7683): pvrusb2-dvb: set to DTV mode before attaching frontend

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7681): pvrusb2-dvb: start working on streaming / buffer handling code

start work on streaming / buffer handling code to feed the software demux

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7680): pvrusb2-dvb: add pvr2_dvb_bus_ctrl to allow frontends to negotiate bus access

This function is just a skeleton for now -
a placeholder to remind us to fix it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7679): pvrusb2: add DVB API framework

Add basic framework for the DVB API.  This is enough to control the
tuner & demod of the digital frontend, but the stream & buffer handling
is still missing.

Additional note from Mike Isely <isely@pobox.com> - also, since these
changes are still very experimental arrange for DVB changes to be
compiled in via new CONFIG_VIDEO_PVRUSB2_DVB option, for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7678): pvrusb2: Fix stupid string typo that has been reproducing wildly

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7677): saa7134: Add/fix Beholder entries

Beholder TV/FM tuners:

Changes:
     Add support Beholder Columbus PCMCIA card.
     Add key map for remote control of Beholder Columbus PCMCIA card.
     Fix gpiomask for all Beholder tuners.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7676): saa7134: fix: Properly handle busy states on i2c bus

There are two conditions, reported by saa7134 that indicates that the I2C bus
is busy: TO_SCL and TO_ARB.

On both states, it needs to wait for I2C release, before using the bus.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7675): tea5767 autodetection is not working on some saa7134 boards

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7674): tda10048: Adding an SNR table

Trying to improve the SNR reporting.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7673): cx23885: Add support for the Hauppauge HVR1400

DVB-T mode is now supported using the DiBcom dib7000p demodulator
and the Xceive xc3028L silicon tuner. Analog mode is not supported.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7672): dib7000p: Add output mode param to the attach struct

This allows future drivers to select the most appropriate output mode.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7671): pxa-camera: fix DMA sg-list coalescing for more than 2 buffers

Currently the pxa-camera driver has a bug, visible when the user requests
more than 2 video buffers. When the third buffer is queued, it is not
appended to the DMA-descriptor list of the second buffer, but is again
appended to the first buffer. Fix it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7670): pxa-camera: handle FIFO overruns

FIFO overruns are not seldom on PXA camera interface FIFOs. Handle them by
dropping the corrupted frame, waiting for the next start-of-frame, and
restarting capture.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7669): pxa_camera: Add support for YUV modes

This patch adds support for YUV packed and planar capture for pxa_camera.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7668): soc-camera: Remove redundant return

This obviously redundant return has been in the driver from the very first
version. Remove it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7666): meye: Replace meye_do_ioctl to use video_ioctl2

Convert meye to use video_ioctl2

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7665): videodev: Add default vidioc handler

Added default vidioc handler for other private ioctls

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7663): budget: Support for Activy budget card with BSBE1 tuner

Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60.
Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7662): stv0299: Fixed some typos

Fixed some typos.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7661): stv0299: Add flag to turn off OP0 output

Add flag to turn off OP0 output.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7660): bsbe1: Use settings recommended by the manufacturer

Reworked the BSBE1 tuner support in bsbe1.h to follow
the ALPS-recommended parameters more closely.

Tested with BSBE1-based Activy cards and TT DVB-S rev 2.3.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7659): dvb-core: Implement DMX_SET_BUFFER_SIZE for dvr

Implementation of DMX_SET_BUFFER_SIZE for dvr.
Synchronization of the code of DMX_SET_BUFFER_SIZE for demux and dvr.

Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7658): dvb-core: Fix DMX_SET_BUFFER_SIZE in case the buffer shrinks

This patch fixes the bug in DMX_SET_BUFFER_SIZE for the demux.
Basically it resets read and write pointers to 0 in case they are
beyond the new size of the buffer.

Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7656): tda826x: Calculate cut off fequency from symbol rate

This patch makes the tuner work with transonders providing higher
symbol rates.
It was contributed by Oliver Endriss.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7655): tda10086 coding stlye fixes

This patch replaces the c++ style comments.
No functional changes

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7654): tda10086: make the xtal frequency a configuration option

Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency.
This reqires a different setup of the clock PLL.
This patch adds an enum to the tda10086_config struct and sets the proper
values for the boards.

This patch also fixes the DVB-S section of the MD7134_BRIDGE_2

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7653): tuner-xc2028: drop the severity of version reporting

tuner-xc2028.c
 - Drop the severity level of the xc3028 version reporting, since it's
   only of interest to developers and user's don't need to have it show up
   in their dmesg output every time they change the channel.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7652): em28xx: Drop the severity level of the "urb resubmit failed"

em28xx-core.c
 - Drop the severity level of the "urb resubmit failed" to debug, since it
   occurs every time a stream disconnects, which fills the dmesg log

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7651): tuner-xc2028: Several fixes to SCODE

This patch fixes several issues on SCODE:

1) The extracting tool weren't generating the proper tags for SCODE. This
   has almost no effect, since those tags shouldn't be used;

2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700;

3) seek_firmware were wanting an exact match for firmware type. This is
   wrong. As result, no SCODE firmware were loaded;

4) A few files were including the wrong file for seeking demod firmwares;

5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware.
   However, this weren't documentated. This feature require more testing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7650): git-dvb: Kconfig fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7648): cx23885: Load any module dependencies accordingly

For boards that require the avcore (cx25840) to be active, ensure
it gets loaded.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7647): Add support for the Hauppauge HVR-1700 digital mode

This adds support for DVB-T mode only, analog is not supported.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7646): cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products

cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7645): Add support for the Hauppauge HVR-1200

This adds support for DVB-T mode only, analog mode is not supported.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7644): Adding support for the NXP TDA10048HN DVB OFDM demodulator

Adding support for the NXP TDA10048HN DVB OFDM demodulator

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7642): cx88: enable radio GPIO correctly

cx88: enable radio GPIO correctly.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7641): V4L: ov511 - use usb_interface as parent, not usb_device

The current code creates a bogus DEVPATH:
  /devices/pci0000:00/0000:00:1d.0/usb1/1-2/video4linux/video0
while it should be:
  /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/video4linux/video0

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7639): au8522: fix a small bug introduced by Checkpatch cleanup

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7638): CodingStyle fixes for au8522 and au0828

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7637): au0828: Typo

au0828: Typo

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7636): au0828: Add HVR850 model number

au0828: Add HVR850 model number

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7635): au8522: Cleanup

au8522: Cleanup

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7634): au0828: Cleanup

au0828: Cleanup

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7633): au8522: consolidate mse2snr_lookup functions

consolidate au8522_qam256_mse2snr_lookup, au8522_qam64_mse2snr_lookup and
au8522_vsb_mse2snr_lookup into a single function, au8522_mse2snr_lookup.

Pass the mse2snr table into au8522_mse2snr_lookup depending on the
modulation type.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7632): au8522: Added SNR support and basic cleanup

au8522: Added SNR support and basic cleanup

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7631): au8522: add function au8522_read_mse

add function au8522_read_mse, which will be used to compute snr

TO DO: mse2snr

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7630): au8522: fix au8522_read_ucblocks for qam

ucblocks are reported in separate registers for vsb & qam

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7629): au8522: replace __FUNCTION__ with __func__

replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7628): au8522: codingstyle cleanups

Fixed some checkpatch.pl warnings

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7627): au0828: replace __FUNCTION__ with __func__

replace __FUNCTION__ with __func__ and clean associated checkpatch.pl
warnings.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7626): Kconfig: VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000

VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7625): au0828: Cleanup

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7624): Avoid an oops if the board is not fully defined

Avoid an oops if the board is not fully defined.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7623): Scripts to maintain the CARDLIST file

Scripts to maintain the CARDLIST file.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7622): HVR950Q Hauppauge eeprom support

HVR950Q Hauppauge eeprom support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USB

Including support for the AU0828 USB Bridge.
Including support for the AU8522 ATSC/QAM Demodulator.
Including support for the AU8522 ATSC/QAM Demodulator.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7620): Adding support for a new i2c bridge type

Adding support for a new i2c bridge type

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7619): em28xx: adds proper demod IF for HVR-900

Thanks to Aidan Thornton <makosoft@googlemail.com> for helping
to test this firmware

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7618): em28xx: make some symbols static

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7617): Removes a manual mode setup

The setup is already done at open().

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7616): em28xx-dvb: Properly selects digital mode at the right place

The driver should be switched to digital mode, when trying to access the
frontend or when streaming.

This patch provides the correct code to support this feature.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital

Before this patch,  HVR900/HVR950 were incorreclty going back to analog. The
result is that only digital were working.

This patch provides the proper setup for analog/digital and tuner callback.
It also properly resets analog into a sane state at open().

Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org>
for helping to set the proper parameters to GPO/GPIO em2883 ports.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7614): em28xx-core: fix some debug printk's that wrongly received KERN_INFO

Those printk's were adding more info to a line that were already being
printed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7613): em28xx: rename registers

Now, all registers will follow the same convension:

EM28XX_R<reg_number>_<reg_name>

This allows to associate a register with its value, and also with a canonical
name. Also, registers that are specific to a given chip were renamed accordingly,
as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started
to appear on em2880).

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7612): em28xx-cards: use register names for GPIO/GPO

Before this patch, registers 0x04 and 0x08 were referenced by its value. This is
bad, since makes harder for someone to understand what this is doing.

This patch renames those two registers into an appropriate name.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7611): em28xx: Move registers to a separate file

em28xx.h contains lots of different stuff inside. The better is to break it on
some files.

This patch removes the register names, moving them to a separate file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7610): em28xx: Select reg wait time based on chip ID

This is more conservative than just removing the msleep() from
em28xx_write_regs_req(), since some old hardware may still need it.
So, it will remove the sleep time only for those chips where this
removal were tested.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7609): em28xx-core: speed-up firmware load

em28xx-core.c:
 - Remove sleep in i2c message routine which slows down i2c by a factor
   10x.  Load time for BASE firmware went from 13s to .973s

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7608): em28xx-dvb: Some cleanups and fixes

em28xx-dvb.c:
 - Remove unneeded xc3028_ctrl structure.  The driver automatically preserves
   the previous value

tuner-xc2028.c:
 - Make the return type for xc2028_get_reg signed, since all of the callers
   are looking for "< 0" to detect errors.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7607): CodingStyle fixes

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7606): em28xx-dvb: Program GPO as well

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloads

xc3028_sleep function is being used with a different meaning. This
should be called only before doing S1/S3 sleep.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7604): em28xx-dvb: Fix analog mode

The analog entries are wrong. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7603): em28xx-dvb: don't use videobuf-dvb

Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code
for registering dvb devices locally and use the URB management code in the
em28xx driver directly. DVB data streaming should now work.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7602): em28xx: generalise URB setup code

Move the URB setup and management code to em28xx-core.c and generalise
it slighlty so that the DVB code can use it.

Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7601): em28xx-dvb: add support for the HVR-900

Adds the correct GPIOs and demod attach code for the HVR-900

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7600): em28xx: Sets frequency when changing to analog mode

This will make tuner-xc2028 to change to analog, if needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fh

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing
this issue.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7598): em28xx: several fixes on gpio programming

em28xx-cards.c:
 - Fix reversed val/rst values in both analog_gpio and digital_gpio
   vectors
 - Fix crash that would was occurring during every analog startup
   while looping over gpio_ctl
 - Remove what appears to be a redundant setting of gpio_ctl->val
 - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC
   scanning from working)

em28xx-dvb.c:
 - Tuner should be in digital mode when issuing the reset
 - Add copyright
 - Change struct definition (corresponds to fix in em28xx-cards.c for
   gpio_ctl looping)

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7597): em28xx: share the same xc3028 setup for analog and digital modes

Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> and Aidan
Thornton" <makosoft@googlemail.com> for pointing some errors with the
previous scenario.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7596): em28xx-dvb: Add support for HVR950

This patch adds DVB support for Hauppauge HVR950.

Thanks to Michael Krufky <mkrufky@linuxtv.org> for getting those values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7595): Improve generic support for setting gpio values

em28xx based devices with xc3028 may require some specific gpio values.
This patch adds a generic handling for such values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7594): em28xx: Fix Kconfig

Some devices have msp3400 audio decoder chip. Selects it, if em28xx.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (7593): em28xx: add a module to handle dvb

This patch adds em28xx-dvb. This driver is highly based on cx88-dvb and
saa7134-dvb.

This code currently loads and unloads successfully. However, some
changes are needed to properly support the mpeg streams and to setup
em28xx to work on DVB mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>