From a51e34dd6080d8d5c9e95a4e0292cd4cb889a61b Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sat, 17 May 2008 23:05:48 -0300 Subject: [PATCH] V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiver - driver for Anysee DVB-T/C receiver Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 9 + drivers/media/dvb/dvb-usb/Makefile | 3 + drivers/media/dvb/dvb-usb/anysee.c | 555 ++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/anysee.h | 304 +++++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 + 5 files changed, 873 insertions(+) create mode 100644 drivers/media/dvb/dvb-usb/anysee.c create mode 100644 drivers/media/dvb/dvb-usb/anysee.h diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index f00a0eb4042..3f7b9b6326b 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -241,3 +241,12 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index c6511a6c0ab..44c11e45e56 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 00000000000..dada92a14cf --- /dev/null +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,555 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xfed6, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 + E30C Plus TDA10023 0f 0.1.2 (not working) + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* known not working (E30C Plus v0.1.2) */ + if (hw_info[0] == 0x0f) { + info("this version of Anysee is not supported yet"); + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + return -ENODEV; + } + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the .", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 00000000000..48da3949ef0 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7dd..e6b43fb3a14 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 -- 2.41.1